view tests/test-rebase-parameters.out @ 10856:b07bd417115b

templates: escape javascript braces

% These fail

% Use continue and abort
hg rebase: cannot use both abort and continue
hg rebase [-s REV | -b REV] [-d REV] [options]
hg rebase {-a|-c}

move changeset (and descendants) to a different branch

    Rebase uses repeated merging to graft changesets from one part of history
    (the source) onto another (the destination). This can be useful for
    linearizing local changes relative to a master development tree.

    If you don't specify a destination changeset ("-d/--dest"), rebase uses
    the tipmost head of the current named branch as the destination. (The
    destination changeset is not modified by rebasing, but new changesets are
    added as its descendants.)

    You can specify which changesets to rebase in two ways: as a "source"
    changeset or as a "base" changeset. Both are shorthand for a topologically
    related set of changesets (the "source branch"). If you specify source
    ("-s/--source"), rebase will rebase that changeset and all of its
    descendants onto dest. If you specify base ("-b/--base"), rebase will
    select ancestors of base back to but not including the common ancestor
    with dest. Thus, "-b" is less precise but more convenient than "-s": you
    can specify any changeset in the source branch, and rebase will select the
    whole branch. If you specify neither "-s" nor "-b", rebase uses the parent
    of the working directory as the base.

    By default, rebase recreates the changesets in the source branch as
    descendants of dest and then destroys the originals. Use "--keep" to
    preserve the original source changesets. Some changesets in the source
    branch (e.g. merges from the destination branch) may be dropped if they no
    longer contribute any change.

    One result of the rules for selecting the destination changeset and source
    branch is that, unlike "merge", rebase will do nothing if you are at the
    latest (tipmost) head of a named branch with two heads. You need to
    explicitly specify source and/or destination (or "update" to the other
    head, if it's the head of the intended source branch).

    If a rebase is interrupted to manually resolve a merge, it can be
    continued with --continue/-c or aborted with --abort/-a.

options:

 -s --source        rebase from the specified changeset
 -b --base          rebase from the base of the specified changeset (up to
                    greatest common ancestor of base and dest)
 -d --dest          rebase onto the specified changeset
    --collapse      collapse the rebased changesets
    --keep          keep original changesets
    --keepbranches  keep original branch names
    --detach        force detaching of source from its original branch
 -c --continue      continue an interrupted rebase
 -a --abort         abort an interrupted rebase
    --style         display using template map file
    --template      display with template

use "hg -v help rebase" to show global options

% Use continue and collapse
hg rebase: cannot use collapse with continue or abort
hg rebase [-s REV | -b REV] [-d REV] [options]
hg rebase {-a|-c}

move changeset (and descendants) to a different branch

    Rebase uses repeated merging to graft changesets from one part of history
    (the source) onto another (the destination). This can be useful for
    linearizing local changes relative to a master development tree.

    If you don't specify a destination changeset ("-d/--dest"), rebase uses
    the tipmost head of the current named branch as the destination. (The
    destination changeset is not modified by rebasing, but new changesets are
    added as its descendants.)

    You can specify which changesets to rebase in two ways: as a "source"
    changeset or as a "base" changeset. Both are shorthand for a topologically
    related set of changesets (the "source branch"). If you specify source
    ("-s/--source"), rebase will rebase that changeset and all of its
    descendants onto dest. If you specify base ("-b/--base"), rebase will
    select ancestors of base back to but not including the common ancestor
    with dest. Thus, "-b" is less precise but more convenient than "-s": you
    can specify any changeset in the source branch, and rebase will select the
    whole branch. If you specify neither "-s" nor "-b", rebase uses the parent
    of the working directory as the base.

    By default, rebase recreates the changesets in the source branch as
    descendants of dest and then destroys the originals. Use "--keep" to
    preserve the original source changesets. Some changesets in the source
    branch (e.g. merges from the destination branch) may be dropped if they no
    longer contribute any change.

    One result of the rules for selecting the destination changeset and source
    branch is that, unlike "merge", rebase will do nothing if you are at the
    latest (tipmost) head of a named branch with two heads. You need to
    explicitly specify source and/or destination (or "update" to the other
    head, if it's the head of the intended source branch).

    If a rebase is interrupted to manually resolve a merge, it can be
    continued with --continue/-c or aborted with --abort/-a.

options:

 -s --source        rebase from the specified changeset
 -b --base          rebase from the base of the specified changeset (up to
                    greatest common ancestor of base and dest)
 -d --dest          rebase onto the specified changeset
    --collapse      collapse the rebased changesets
    --keep          keep original changesets
    --keepbranches  keep original branch names
    --detach        force detaching of source from its original branch
 -c --continue      continue an interrupted rebase
 -a --abort         abort an interrupted rebase
    --style         display using template map file
    --template      display with template

use "hg -v help rebase" to show global options

% Use continue/abort and dest/source
hg rebase: abort and continue do not allow specifying revisions
hg rebase [-s REV | -b REV] [-d REV] [options]
hg rebase {-a|-c}

move changeset (and descendants) to a different branch

    Rebase uses repeated merging to graft changesets from one part of history
    (the source) onto another (the destination). This can be useful for
    linearizing local changes relative to a master development tree.

    If you don't specify a destination changeset ("-d/--dest"), rebase uses
    the tipmost head of the current named branch as the destination. (The
    destination changeset is not modified by rebasing, but new changesets are
    added as its descendants.)

    You can specify which changesets to rebase in two ways: as a "source"
    changeset or as a "base" changeset. Both are shorthand for a topologically
    related set of changesets (the "source branch"). If you specify source
    ("-s/--source"), rebase will rebase that changeset and all of its
    descendants onto dest. If you specify base ("-b/--base"), rebase will
    select ancestors of base back to but not including the common ancestor
    with dest. Thus, "-b" is less precise but more convenient than "-s": you
    can specify any changeset in the source branch, and rebase will select the
    whole branch. If you specify neither "-s" nor "-b", rebase uses the parent
    of the working directory as the base.

    By default, rebase recreates the changesets in the source branch as
    descendants of dest and then destroys the originals. Use "--keep" to
    preserve the original source changesets. Some changesets in the source
    branch (e.g. merges from the destination branch) may be dropped if they no
    longer contribute any change.

    One result of the rules for selecting the destination changeset and source
    branch is that, unlike "merge", rebase will do nothing if you are at the
    latest (tipmost) head of a named branch with two heads. You need to
    explicitly specify source and/or destination (or "update" to the other
    head, if it's the head of the intended source branch).

    If a rebase is interrupted to manually resolve a merge, it can be
    continued with --continue/-c or aborted with --abort/-a.

options:

 -s --source        rebase from the specified changeset
 -b --base          rebase from the base of the specified changeset (up to
                    greatest common ancestor of base and dest)
 -d --dest          rebase onto the specified changeset
    --collapse      collapse the rebased changesets
    --keep          keep original changesets
    --keepbranches  keep original branch names
    --detach        force detaching of source from its original branch
 -c --continue      continue an interrupted rebase
 -a --abort         abort an interrupted rebase
    --style         display using template map file
    --template      display with template

use "hg -v help rebase" to show global options

% Use source and base
hg rebase: cannot specify both a revision and a base
hg rebase [-s REV | -b REV] [-d REV] [options]
hg rebase {-a|-c}

move changeset (and descendants) to a different branch

    Rebase uses repeated merging to graft changesets from one part of history
    (the source) onto another (the destination). This can be useful for
    linearizing local changes relative to a master development tree.

    If you don't specify a destination changeset ("-d/--dest"), rebase uses
    the tipmost head of the current named branch as the destination. (The
    destination changeset is not modified by rebasing, but new changesets are
    added as its descendants.)

    You can specify which changesets to rebase in two ways: as a "source"
    changeset or as a "base" changeset. Both are shorthand for a topologically
    related set of changesets (the "source branch"). If you specify source
    ("-s/--source"), rebase will rebase that changeset and all of its
    descendants onto dest. If you specify base ("-b/--base"), rebase will
    select ancestors of base back to but not including the common ancestor
    with dest. Thus, "-b" is less precise but more convenient than "-s": you
    can specify any changeset in the source branch, and rebase will select the
    whole branch. If you specify neither "-s" nor "-b", rebase uses the parent
    of the working directory as the base.

    By default, rebase recreates the changesets in the source branch as
    descendants of dest and then destroys the originals. Use "--keep" to
    preserve the original source changesets. Some changesets in the source
    branch (e.g. merges from the destination branch) may be dropped if they no
    longer contribute any change.

    One result of the rules for selecting the destination changeset and source
    branch is that, unlike "merge", rebase will do nothing if you are at the
    latest (tipmost) head of a named branch with two heads. You need to
    explicitly specify source and/or destination (or "update" to the other
    head, if it's the head of the intended source branch).

    If a rebase is interrupted to manually resolve a merge, it can be
    continued with --continue/-c or aborted with --abort/-a.

options:

 -s --source        rebase from the specified changeset
 -b --base          rebase from the base of the specified changeset (up to
                    greatest common ancestor of base and dest)
 -d --dest          rebase onto the specified changeset
    --collapse      collapse the rebased changesets
    --keep          keep original changesets
    --keepbranches  keep original branch names
    --detach        force detaching of source from its original branch
 -c --continue      continue an interrupted rebase
 -a --abort         abort an interrupted rebase
    --style         display using template map file
    --template      display with template

use "hg -v help rebase" to show global options

% Rebase with no arguments - from current
nothing to rebase

% Rebase with no arguments - from the current branch
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
nothing to rebase
% ----------
% These work

% Rebase with no arguments (from 3 onto 7)
3 files updated, 0 files merged, 2 files removed, 0 files unresolved
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files
rebase completed
% Try to rollback after a rebase (fail)
no rollback information available

% Rebase with base == '.' => same as no arguments (from 3 onto 7)
3 files updated, 0 files merged, 3 files removed, 0 files unresolved
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files
rebase completed

% Rebase with dest == default => same as no arguments (from 3 onto 7)
3 files updated, 0 files merged, 3 files removed, 0 files unresolved
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files
rebase completed

% Specify only source (from 4 onto 7)
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 4 files (-1 heads)
rebase completed

% Specify only dest (from 3 onto 6)
3 files updated, 0 files merged, 3 files removed, 0 files unresolved
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files (+1 heads)
rebase completed

% Specify only base (from 3 onto 7)
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files
rebase completed

% Specify source and dest (from 4 onto 6)
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 4 changesets with 4 changes to 4 files
rebase completed

% Specify base and dest (from 3 onto 6)
saving bundle to 
adding branch
adding changesets
adding manifests
adding file changes
added 5 changesets with 5 changes to 5 files (+1 heads)
rebase completed