view tests/test-run-tests.t @ 27246:b288fb2724bf

wireproto: config options to disable bundle1

bundle2 is the new and preferred wire protocol format. For various
reasons, server operators may wish to force clients to use it.

One reason is performance. If a repository is stored in generaldelta,
the server must recompute deltas in order to produce the bundle1
changegroup. This can be extremely expensive. For mozilla-central,
bundle generation typically takes a few minutes. However, generating
a non-gd bundle from a generaldelta encoded mozilla-central requires
over 30 minutes of CPU! If a large repository like mozilla-central
were encoded in generaldelta and non-gd clients connected, they could
easily flood a server by cloning.

This patch gives server operators config knobs to control whether
bundle1 is allowed for push and pull operations. The default is to
support legacy bundle1 clients, making this patch backwards compatible.

This file tests the behavior of run-tests.py itself.

Avoid interference from actual test env:

  $ unset HGTEST_JOBS
  $ unset HGTEST_TIMEOUT
  $ unset HGTEST_PORT
  $ unset HGTEST_SHELL

Smoke test
============

  $ run-tests.py $HGTEST_RUN_TESTS_PURE
  
  # Ran 0 tests, 0 skipped, 0 warned, 0 failed.

a succesful test
=======================

  $ cat > test-success.t << EOF
  >   $ echo babar
  >   babar
  >   $ echo xyzzy
  >   never happens (?)
  >   xyzzy
  >   nor this (?)
  > EOF

  $ run-tests.py --with-hg=`which hg`
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

failing test
==================

  $ cat > test-failure.t << EOF
  >   $ echo babar
  >   rataxes
  > This is a noop statement so that
  > this test is still more bytes than success.
  > EOF

  >>> fh = open('test-failure-unicode.t', 'wb')
  >>> fh.write(u'  $ echo babar\u03b1\n'.encode('utf-8')) and None
  >>> fh.write(u'  l\u03b5\u03b5t\n'.encode('utf-8')) and None

  $ run-tests.py --with-hg=`which hg`
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure.t: output changed
  Failed test-failure-unicode.t: output changed
  # Ran 3 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]

test --xunit support
  $ run-tests.py --with-hg=`which hg` --xunit=xunit.xml
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure.t: output changed
  Failed test-failure-unicode.t: output changed
  # Ran 3 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="2" name="run-tests" skipped="0" tests="3">
    <testcase name="test-success.t" time="*"/> (glob)
    <testcase name="test-failure-unicode.t" time="*"> (glob)
  <![CDATA[--- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  ]]>  </testcase>
    <testcase name="test-failure.t" time="*"> (glob)
  <![CDATA[--- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  ]]>  </testcase>
  </testsuite>

  $ rm test-failure-unicode.t

test for --retest
====================

  $ run-tests.py --with-hg=`which hg` --retest
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Selecting Tests To Run
======================

successful

  $ run-tests.py --with-hg=`which hg` test-success.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

success w/ keyword
  $ run-tests.py --with-hg=`which hg` -k xyzzy
  .
  # Ran 2 tests, 1 skipped, 0 warned, 0 failed.

failed

  $ run-tests.py --with-hg=`which hg` test-failure.t
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

failure w/ keyword
  $ run-tests.py --with-hg=`which hg` -k rataxes
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Verify that when a process fails to start we show a useful message
==================================================================
NOTE: there is currently a bug where this shows "2 failed" even though
it's actually the same test being reported for failure twice.

  $ cat > test-serve-fail.t <<EOF
  >   $ echo 'abort: child process failed to start blah'
  > EOF
  $ run-tests.py --with-hg=`which hg` test-serve-fail.t
  
  ERROR: test-serve-fail.t output changed
  !
  ERROR: test-serve-fail.t output changed
  !
  Failed test-serve-fail.t: server failed to start (HGPORT=*) (glob)
  Failed test-serve-fail.t: output changed
  # Ran 1 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-serve-fail.t

Running In Debug Mode
======================

  $ run-tests.py --with-hg=`which hg` --debug 2>&1 | grep -v pwd
  + echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 4 0 (glob)
  *SALT* 4 0 (glob)
  .+ echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 2 0 (glob)
  *SALT* 2 0 (glob)
  + echo xyzzy
  xyzzy
  + echo *SALT* 6 0 (glob)
  *SALT* 6 0 (glob)
  .
  # Ran 2 tests, 0 skipped, 0 warned, 0 failed.

Parallel runs
==============

(duplicate the failing test to get predictable output)
  $ cp test-failure.t test-failure-copy.t

  $ run-tests.py --with-hg=`which hg` --jobs 2 test-failure*.t -n
  !!
  Failed test-failure*.t: output changed (glob)
  Failed test-failure*.t: output changed (glob)
  # Ran 2 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]

failures in parallel with --first should only print one failure
  >>> f = open('test-nothing.t', 'w')
  >>> f.write('foo\n' * 1024) and None
  >>> f.write('  $ sleep 1') and None
  $ run-tests.py --with-hg=`which hg` --jobs 2 --first
  
  --- $TESTTMP/test-failure*.t (glob)
  +++ $TESTTMP/test-failure*.t.err (glob)
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  Failed test-failure*.t: output changed (glob)
  Failed test-nothing.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]


(delete the duplicated test file)
  $ rm test-failure-copy.t test-nothing.t


Interactive run
===============

(backup the failing test)
  $ cp test-failure.t backup

Refuse the fix

  $ echo 'n' | run-tests.py --with-hg=`which hg` -i
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  Accept this change? [n] 
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat test-failure.t
    $ echo babar
    rataxes
  This is a noop statement so that
  this test is still more bytes than success.

Interactive with custom view

  $ echo 'n' | run-tests.py --with-hg=`which hg` -i --view echo
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
  Accept this change? [n]* (glob)
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

View the fix

  $ echo 'y' | run-tests.py --with-hg=`which hg` --view echo
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
  
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Accept the fix

  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/foo.hg" >> test-failure.t
  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/foo.hg (glob)" >> test-failure.t
  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/*.hg (glob)" >> test-failure.t
  $ echo 'y' | run-tests.py --with-hg=`which hg` -i 2>&1 | \
  >   sed -e 's,(glob)$,&<,g'
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,9 +1,9 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  -  saved backup bundle to $TESTTMP/foo.hg
  +  saved backup bundle to $TESTTMP/foo.hg (glob)<
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
     saved backup bundle to $TESTTMP/foo.hg (glob)<
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  Accept this change? [n] ..
  # Ran 2 tests, 0 skipped, 0 warned, 0 failed.

  $ sed -e 's,(glob)$,&<,g' test-failure.t
    $ echo babar
    babar
  This is a noop statement so that
  this test is still more bytes than success.
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg (glob)<
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg (glob)<
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/*.hg (glob)<

(reinstall)
  $ mv backup test-failure.t

No Diff
===============

  $ run-tests.py --with-hg=`which hg` --nodiff
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

test --tmpdir support
  $ run-tests.py --with-hg=`which hg` --tmpdir=$TESTTMP/keep test-success.t
  
  Keeping testtmp dir: $TESTTMP/keep/child1/test-success.t (glob)
  Keeping threadtmp dir: $TESTTMP/keep/child1  (glob)
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

timeouts
========
  $ cat > test-timeout.t <<EOF
  >   $ sleep 2
  >   $ echo pass
  >   pass
  > EOF
  > echo '#require slow' > test-slow-timeout.t
  > cat test-timeout.t >> test-slow-timeout.t
  $ run-tests.py --with-hg=`which hg` --timeout=1 --slowtimeout=3 \
  > test-timeout.t test-slow-timeout.t
  s
  ERROR: test-timeout.t output changed
  !
  Skipped test-slow-timeout.t: skipped
  Failed test-timeout.t: timed out
  # Ran 1 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]
  $ run-tests.py --with-hg=`which hg` --timeout=1 --slowtimeout=3 \
  > test-timeout.t test-slow-timeout.t --allow-slow-tests
  .
  ERROR: test-timeout.t output changed
  !
  Failed test-timeout.t: timed out
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-timeout.t test-slow-timeout.t

test for --time
==================

  $ run-tests.py --with-hg=`which hg` test-success.t --time
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   test-success.t (re)

test for --time with --job enabled
====================================

  $ run-tests.py --with-hg=`which hg` test-success.t --time --jobs 2
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   test-success.t (re)

Skips
================
  $ cat > test-skip.t <<EOF
  >   $ echo xyzzy
  > #require false
  > EOF
  $ run-tests.py --with-hg=`which hg` --nodiff
  !.s
  Skipped test-skip.t: skipped
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ run-tests.py --with-hg=`which hg` --keyword xyzzy
  .s
  Skipped test-skip.t: skipped
  # Ran 2 tests, 2 skipped, 0 warned, 0 failed.

Skips with xml
  $ run-tests.py --with-hg=`which hg` --keyword xyzzy \
  >  --xunit=xunit.xml
  .s
  Skipped test-skip.t: skipped
  # Ran 2 tests, 2 skipped, 0 warned, 0 failed.
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="0" name="run-tests" skipped="2" tests="2">
    <testcase name="test-success.t" time="*"/> (glob)
  </testsuite>

Missing skips or blacklisted skips don't count as executed:
  $ echo test-failure.t > blacklist
  $ run-tests.py --with-hg=`which hg` --blacklist=blacklist \
  >   test-failure.t test-bogus.t
  ss
  Skipped test-bogus.t: Doesn't exist
  Skipped test-failure.t: blacklisted
  # Ran 0 tests, 2 skipped, 0 warned, 0 failed.

#if json

test for --json
==================

  $ run-tests.py --with-hg=`which hg` --json
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !.s
  Skipped test-skip.t: skipped
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "failure", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }
  } (no-eol)

Test that failed test accepted through interactive are properly reported:

  $ cp test-failure.t backup
  $ echo y | run-tests.py --with-hg=`which hg` --json -i
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  Accept this change? [n] ..s
  Skipped test-skip.t: skipped
  # Ran 2 tests, 1 skipped, 0 warned, 0 failed.

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }
  } (no-eol)
  $ mv backup test-failure.t

#endif

backslash on end of line with glob matching is handled properly

  $ cat > test-glob-backslash.t << EOF
  >   $ echo 'foo bar \\'
  >   foo * \ (glob)
  > EOF

  $ run-tests.py --with-hg=`which hg` test-glob-backslash.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

  $ rm -f test-glob-backslash.t

Test reusability for third party tools
======================================

  $ mkdir "$TESTTMP"/anothertests
  $ cd "$TESTTMP"/anothertests

test that `run-tests.py` can execute hghave, even if it runs not in
Mercurial source tree.

  $ cat > test-hghave.t <<EOF
  > #require true
  >   $ echo foo
  >   foo
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-hghave.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

test that RUNTESTDIR refers the directory, in which `run-tests.py` now
running is placed.

  $ cat > test-runtestdir.t <<EOF
  > - $TESTDIR, in which test-run-tests.t is placed
  > - \$TESTDIR, in which test-runtestdir.t is placed (expanded at runtime)
  > - \$RUNTESTDIR, in which run-tests.py is placed (expanded at runtime)
  > 
  > #if windows
  >   $ test "\$TESTDIR" = "$TESTTMP\anothertests"
  > #else
  >   $ test "\$TESTDIR" = "$TESTTMP"/anothertests
  > #endif
  >   $ test "\$RUNTESTDIR" = "$TESTDIR"
  >   $ head -n 3 "\$RUNTESTDIR"/../contrib/check-code.py
  >   #!/usr/bin/env python
  >   #
  >   # check-code - a style and portability checker for Mercurial
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-runtestdir.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

#if execbit

test that TESTDIR is referred in PATH

  $ cat > custom-command.sh <<EOF
  > #!/bin/sh
  > echo "hello world"
  > EOF
  $ chmod +x custom-command.sh
  $ cat > test-testdir-path.t <<EOF
  >   $ custom-command.sh
  >   hello world
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-testdir-path.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

#endif

test support for --allow-slow-tests
  $ cat > test-very-slow-test.t <<EOF
  > #require slow
  >   $ echo pass
  >   pass
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-very-slow-test.t
  s
  Skipped test-very-slow-test.t: skipped
  # Ran 0 tests, 1 skipped, 0 warned, 0 failed.
  $ run-tests.py $HGTEST_RUN_TESTS_PURE --allow-slow-tests test-very-slow-test.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.