view contrib/buildrpm @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

#!/bin/bash -e
#
# Build a Mercurial RPM from the current repo
#
# Tested on
# - Fedora 20
# - CentOS 5
# - centOS 6

. $(dirname $0)/packagelib.sh

BUILD=1
RPMBUILDDIR="$PWD/rpmbuild"
while [ "$1" ]; do
    case "$1" in
    --prepare )
        shift
        BUILD=
        ;;
    --withpython | --with-python)
        shift
        PYTHONVER=2.7.10
        PYTHONMD5=d7547558fd673bd9d38e2108c6b42521
        ;;
    --rpmbuilddir )
        shift
        RPMBUILDDIR="$1"
        shift
        ;;
    * )
        echo "Invalid parameter $1!" 1>&2
        exit 1
        ;;
    esac
done

cd "`dirname $0`/.."

specfile=$PWD/contrib/mercurial.spec
if [ ! -f $specfile ]; then
    echo "Cannot find $specfile!" 1>&2
    exit 1
fi

if [ ! -d .hg ]; then
    echo 'You are not inside a Mercurial repository!' 1>&2
    exit 1
fi

gethgversion

# TODO: handle distance/node set, and type set

if [ -z "$type" ] ; then
   release=1
else
    release=0.9_$type
fi

if [ -n "$distance" ] ; then
    release=$release+$distance_$node
fi

if [ "$PYTHONVER" ]; then
    release=$release+$PYTHONVER
    RPMPYTHONVER=$PYTHONVER
else
    RPMPYTHONVER=%{nil}
fi

mkdir -p $RPMBUILDDIR/{SOURCES,BUILD,SRPMS,RPMS}
$HG archive -t tgz $RPMBUILDDIR/SOURCES/mercurial-$version-$release.tar.gz
if [ "$PYTHONVER" ]; then
(
    mkdir -p build
    cd build
    PYTHON_SRCFILE=Python-$PYTHONVER.tgz
    [ -f $PYTHON_SRCFILE ] || curl -Lo $PYTHON_SRCFILE http://www.python.org/ftp/python/$PYTHONVER/$PYTHON_SRCFILE
    if [ "$PYTHONMD5" ]; then
        echo "$PYTHONMD5 $PYTHON_SRCFILE" | md5sum -w -c
    fi
    ln -f $PYTHON_SRCFILE $RPMBUILDDIR/SOURCES/$PYTHON_SRCFILE

    DOCUTILSVER=`sed -ne "s/^%global docutilsname docutils-//p" $specfile`
    DOCUTILS_SRCFILE=docutils-$DOCUTILSVER.tar.gz
    [ -f $DOCUTILS_SRCFILE ] || curl -Lo $DOCUTILS_SRCFILE http://downloads.sourceforge.net/project/docutils/docutils/$DOCUTILSVER/$DOCUTILS_SRCFILE
    DOCUTILSMD5=`sed -ne "s/^%global docutilsmd5 //p" $specfile`
    if [ "$DOCUTILSMD5" ]; then
        echo "$DOCUTILSMD5 $DOCUTILS_SRCFILE" | md5sum -w -c
    fi
    ln -f $DOCUTILS_SRCFILE $RPMBUILDDIR/SOURCES/$DOCUTILS_SRCFILE
)
fi

mkdir -p $RPMBUILDDIR/SPECS
rpmspec=$RPMBUILDDIR/SPECS/mercurial.spec

sed -e "s,^Version:.*,Version: $version," \
    -e "s,^Release:.*,Release: $release," \
    $specfile > $rpmspec

echo >> $rpmspec
echo "%changelog" >> $rpmspec

if echo $version | grep '+' > /dev/null 2>&1; then
    latesttag="`echo $version | sed -e 's/+.*//'`"
    $HG log -r .:"$latesttag" -fM \
        --template '{date|hgdate}\t{author}\t{desc|firstline}\n' | python -c '
import sys, time

def datestr(date, format):
    return time.strftime(format, time.gmtime(float(date[0]) - date[1]))

changelog = []
for l in sys.stdin.readlines():
    tok = l.split("\t")
    hgdate = tuple(int(v) for v in tok[0].split())
    changelog.append((datestr(hgdate, "%F"), tok[1], hgdate, tok[2]))
prevtitle = ""
for l in sorted(changelog, reverse=True):
    title = "* %s %s" % (datestr(l[2], "%a %b %d %Y"), l[1])
    if prevtitle != title:
        prevtitle = title
        print
        print title
    print "- %s" % l[3].strip()
' >> $rpmspec

else

    $HG log \
         --template '{date|hgdate}\t{author}\t{desc|firstline}\n' \
         .hgtags | python -c '
import sys, time

def datestr(date, format):
    return time.strftime(format, time.gmtime(float(date[0]) - date[1]))

for l in sys.stdin.readlines():
    tok = l.split("\t")
    hgdate = tuple(int(v) for v in tok[0].split())
    print "* %s %s\n- %s" % (datestr(hgdate, "%a %b %d %Y"), tok[1], tok[2])
' >> $rpmspec

fi

sed -i \
    -e "s/^%define withpython.*$/%define withpython $RPMPYTHONVER/" \
    $rpmspec

if [ "$BUILD" ]; then
    rpmbuild --define "_topdir $RPMBUILDDIR" -ba $rpmspec --clean
    if [ $? = 0 ]; then
        echo
        echo "Built packages for $version-$release:"
        find $RPMBUILDDIR/*RPMS/ -type f -newer $rpmspec
    fi
else
    echo "Prepared sources for $version-$release $rpmspec are in $RPMBUILDDIR/SOURCES/ - use like:"
    echo "rpmbuild --define '_topdir $RPMBUILDDIR' -ba $rpmspec --clean"
fi