view hgext/gpg.py @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

# Copyright 2005, 2006 Benoit Boissinot <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''commands to sign and verify changesets'''

from __future__ import absolute_import

import binascii
import os
import tempfile

from mercurial.i18n import _
from mercurial import (
    cmdutil,
    commands,
    error,
    match,
    node as hgnode,
    util,
)

cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

class gpg(object):
    def __init__(self, path, key=None):
        self.path = path
        self.key = (key and " --local-user \"%s\"" % key) or ""

    def sign(self, data):
        gpgcmd = "%s --sign --detach-sign%s" % (self.path, self.key)
        return util.filter(data, gpgcmd)

    def verify(self, data, sig):
        """ returns of the good and bad signatures"""
        sigfile = datafile = None
        try:
            # create temporary files
            fd, sigfile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".sig")
            fp = os.fdopen(fd, 'wb')
            fp.write(sig)
            fp.close()
            fd, datafile = tempfile.mkstemp(prefix="hg-gpg-", suffix=".txt")
            fp = os.fdopen(fd, 'wb')
            fp.write(data)
            fp.close()
            gpgcmd = ("%s --logger-fd 1 --status-fd 1 --verify "
                      "\"%s\" \"%s\"" % (self.path, sigfile, datafile))
            ret = util.filter("", gpgcmd)
        finally:
            for f in (sigfile, datafile):
                try:
                    if f:
                        os.unlink(f)
                except OSError:
                    pass
        keys = []
        key, fingerprint = None, None
        for l in ret.splitlines():
            # see DETAILS in the gnupg documentation
            # filter the logger output
            if not l.startswith("[GNUPG:]"):
                continue
            l = l[9:]
            if l.startswith("VALIDSIG"):
                # fingerprint of the primary key
                fingerprint = l.split()[10]
            elif l.startswith("ERRSIG"):
                key = l.split(" ", 3)[:2]
                key.append("")
                fingerprint = None
            elif (l.startswith("GOODSIG") or
                  l.startswith("EXPSIG") or
                  l.startswith("EXPKEYSIG") or
                  l.startswith("BADSIG")):
                if key is not None:
                    keys.append(key + [fingerprint])
                key = l.split(" ", 2)
                fingerprint = None
        if key is not None:
            keys.append(key + [fingerprint])
        return keys

def newgpg(ui, **opts):
    """create a new gpg instance"""
    gpgpath = ui.config("gpg", "cmd", "gpg")
    gpgkey = opts.get('key')
    if not gpgkey:
        gpgkey = ui.config("gpg", "key", None)
    return gpg(gpgpath, gpgkey)

def sigwalk(repo):
    """
    walk over every sigs, yields a couple
    ((node, version, sig), (filename, linenumber))
    """
    def parsefile(fileiter, context):
        ln = 1
        for l in fileiter:
            if not l:
                continue
            yield (l.split(" ", 2), (context, ln))
            ln += 1

    # read the heads
    fl = repo.file(".hgsigs")
    for r in reversed(fl.heads()):
        fn = ".hgsigs|%s" % hgnode.short(r)
        for item in parsefile(fl.read(r).splitlines(), fn):
            yield item
    try:
        # read local signatures
        fn = "localsigs"
        for item in parsefile(repo.vfs(fn), fn):
            yield item
    except IOError:
        pass

def getkeys(ui, repo, mygpg, sigdata, context):
    """get the keys who signed a data"""
    fn, ln = context
    node, version, sig = sigdata
    prefix = "%s:%d" % (fn, ln)
    node = hgnode.bin(node)

    data = node2txt(repo, node, version)
    sig = binascii.a2b_base64(sig)
    keys = mygpg.verify(data, sig)

    validkeys = []
    # warn for expired key and/or sigs
    for key in keys:
        if key[0] == "ERRSIG":
            ui.write(_("%s Unknown key ID \"%s\"\n")
                     % (prefix, shortkey(ui, key[1][:15])))
            continue
        if key[0] == "BADSIG":
            ui.write(_("%s Bad signature from \"%s\"\n") % (prefix, key[2]))
            continue
        if key[0] == "EXPSIG":
            ui.write(_("%s Note: Signature has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        elif key[0] == "EXPKEYSIG":
            ui.write(_("%s Note: This key has expired"
                       " (signed by: \"%s\")\n") % (prefix, key[2]))
        validkeys.append((key[1], key[2], key[3]))
    return validkeys

@command("sigs", [], _('hg sigs'))
def sigs(ui, repo):
    """list signed changesets"""
    mygpg = newgpg(ui)
    revs = {}

    for data, context in sigwalk(repo):
        node, version, sig = data
        fn, ln = context
        try:
            n = repo.lookup(node)
        except KeyError:
            ui.warn(_("%s:%d node does not exist\n") % (fn, ln))
            continue
        r = repo.changelog.rev(n)
        keys = getkeys(ui, repo, mygpg, data, context)
        if not keys:
            continue
        revs.setdefault(r, [])
        revs[r].extend(keys)
    for rev in sorted(revs, reverse=True):
        for k in revs[rev]:
            r = "%5d:%s" % (rev, hgnode.hex(repo.changelog.node(rev)))
            ui.write("%-30s %s\n" % (keystr(ui, k), r))

@command("sigcheck", [], _('hg sigcheck REV'))
def sigcheck(ui, repo, rev):
    """verify all the signatures there may be for a particular revision"""
    mygpg = newgpg(ui)
    rev = repo.lookup(rev)
    hexrev = hgnode.hex(rev)
    keys = []

    for data, context in sigwalk(repo):
        node, version, sig = data
        if node == hexrev:
            k = getkeys(ui, repo, mygpg, data, context)
            if k:
                keys.extend(k)

    if not keys:
        ui.write(_("no valid signature for %s\n") % hgnode.short(rev))
        return

    # print summary
    ui.write(_("%s is signed by:\n") % hgnode.short(rev))
    for key in keys:
        ui.write(" %s\n" % keystr(ui, key))

def keystr(ui, key):
    """associate a string to a key (username, comment)"""
    keyid, user, fingerprint = key
    comment = ui.config("gpg", fingerprint, None)
    if comment:
        return "%s (%s)" % (user, comment)
    else:
        return user

@command("sign",
         [('l', 'local', None, _('make the signature local')),
          ('f', 'force', None, _('sign even if the sigfile is modified')),
          ('', 'no-commit', None, _('do not commit the sigfile after signing')),
          ('k', 'key', '',
           _('the key id to sign with'), _('ID')),
          ('m', 'message', '',
           _('use text as commit message'), _('TEXT')),
          ('e', 'edit', False, _('invoke editor on commit messages')),
         ] + commands.commitopts2,
         _('hg sign [OPTION]... [REV]...'))
def sign(ui, repo, *revs, **opts):
    """add a signature for the current or given revision

    If no revision is given, the parent of the working directory is used,
    or tip if no revision is checked out.

    The ``gpg.cmd`` config setting can be used to specify the command
    to run. A default key can be specified with ``gpg.key``.

    See :hg:`help dates` for a list of formats valid for -d/--date.
    """
    with repo.wlock():
        return _dosign(ui, repo, *revs, **opts)

def _dosign(ui, repo, *revs, **opts):
    mygpg = newgpg(ui, **opts)
    sigver = "0"
    sigmessage = ""

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    if revs:
        nodes = [repo.lookup(n) for n in revs]
    else:
        nodes = [node for node in repo.dirstate.parents()
                 if node != hgnode.nullid]
        if len(nodes) > 1:
            raise error.Abort(_('uncommitted merge - please provide a '
                               'specific revision'))
        if not nodes:
            nodes = [repo.changelog.tip()]

    for n in nodes:
        hexnode = hgnode.hex(n)
        ui.write(_("signing %d:%s\n") % (repo.changelog.rev(n),
                                         hgnode.short(n)))
        # build data
        data = node2txt(repo, n, sigver)
        sig = mygpg.sign(data)
        if not sig:
            raise error.Abort(_("error while signing"))
        sig = binascii.b2a_base64(sig)
        sig = sig.replace("\n", "")
        sigmessage += "%s %s %s\n" % (hexnode, sigver, sig)

    # write it
    if opts['local']:
        repo.vfs.append("localsigs", sigmessage)
        return

    if not opts["force"]:
        msigs = match.exact(repo.root, '', ['.hgsigs'])
        if any(repo.status(match=msigs, unknown=True, ignored=True)):
            raise error.Abort(_("working copy of .hgsigs is changed "),
                             hint=_("please commit .hgsigs manually"))

    sigsfile = repo.wfile(".hgsigs", "ab")
    sigsfile.write(sigmessage)
    sigsfile.close()

    if '.hgsigs' not in repo.dirstate:
        repo[None].add([".hgsigs"])

    if opts["no_commit"]:
        return

    message = opts['message']
    if not message:
        # we don't translate commit messages
        message = "\n".join(["Added signature for changeset %s"
                             % hgnode.short(n)
                             for n in nodes])
    try:
        editor = cmdutil.getcommiteditor(editform='gpg.sign', **opts)
        repo.commit(message, opts['user'], opts['date'], match=msigs,
                    editor=editor)
    except ValueError as inst:
        raise error.Abort(str(inst))

def shortkey(ui, key):
    if len(key) != 16:
        ui.debug("key ID \"%s\" format error\n" % key)
        return key

    return key[-8:]

def node2txt(repo, node, ver):
    """map a manifest into some text"""
    if ver == "0":
        return "%s\n" % hgnode.hex(node)
    else:
        raise error.Abort(_("unknown signature version"))