view mercurial/unionrepo.py @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

# unionrepo.py - repository class for viewing union of repository changesets
#
# Derived from bundlerepo.py
# Copyright 2006, 2007 Benoit Boissinot <[e-mail]>
# Copyright 2013 Unity Technologies, Mads Kiilerich <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""Repository class for "in-memory pull" of one local repository to another,
allowing operations like diff and log with revsets.
"""

from __future__ import absolute_import

import os

from .i18n import _
from .node import nullid

from . import (
    changelog,
    cmdutil,
    error,
    filelog,
    localrepo,
    manifest,
    mdiff,
    pathutil,
    revlog,
    scmutil,
    util,
)

class unionrevlog(revlog.revlog):
    def __init__(self, opener, indexfile, revlog2, linkmapper):
        # How it works:
        # To retrieve a revision, we just need to know the node id so we can
        # look it up in revlog2.
        #
        # To differentiate a rev in the second revlog from a rev in the revlog,
        # we check revision against repotiprev.
        opener = scmutil.readonlyvfs(opener)
        revlog.revlog.__init__(self, opener, indexfile)
        self.revlog2 = revlog2

        n = len(self)
        self.repotiprev = n - 1
        self.bundlerevs = set() # used by 'bundle()' revset expression
        for rev2 in self.revlog2:
            rev = self.revlog2.index[rev2]
            # rev numbers - in revlog2, very different from self.rev
            _start, _csize, _rsize, base, linkrev, p1rev, p2rev, node = rev
            flags = _start & 0xFFFF

            if linkmapper is None: # link is to same revlog
                assert linkrev == rev2 # we never link back
                link = n
            else: # rev must be mapped from repo2 cl to unified cl by linkmapper
                link = linkmapper(linkrev)

            if linkmapper is not None: # link is to same revlog
                base = linkmapper(base)

            if node in self.nodemap:
                # this happens for the common revlog revisions
                self.bundlerevs.add(self.nodemap[node])
                continue

            p1node = self.revlog2.node(p1rev)
            p2node = self.revlog2.node(p2rev)

            e = (flags, None, None, base,
                 link, self.rev(p1node), self.rev(p2node), node)
            self.index.insert(-1, e)
            self.nodemap[node] = n
            self.bundlerevs.add(n)
            n += 1

    def _chunk(self, rev):
        if rev <= self.repotiprev:
            return revlog.revlog._chunk(self, rev)
        return self.revlog2._chunk(self.node(rev))

    def revdiff(self, rev1, rev2):
        """return or calculate a delta between two revisions"""
        if rev1 > self.repotiprev and rev2 > self.repotiprev:
            return self.revlog2.revdiff(
                self.revlog2.rev(self.node(rev1)),
                self.revlog2.rev(self.node(rev2)))
        elif rev1 <= self.repotiprev and rev2 <= self.repotiprev:
            return self.baserevdiff(rev1, rev2)

        return mdiff.textdiff(self.revision(self.node(rev1)),
                              self.revision(self.node(rev2)))

    def revision(self, nodeorrev):
        """return an uncompressed revision of a given node or revision
        number.
        """
        if isinstance(nodeorrev, int):
            rev = nodeorrev
            node = self.node(rev)
        else:
            node = nodeorrev
            rev = self.rev(node)

        if node == nullid:
            return ""

        if rev > self.repotiprev:
            text = self.revlog2.revision(node)
            self._cache = (node, rev, text)
        else:
            text = self.baserevision(rev)
            # already cached
        return text

    def baserevision(self, nodeorrev):
        # Revlog subclasses may override 'revision' method to modify format of
        # content retrieved from revlog. To use unionrevlog with such class one
        # needs to override 'baserevision' and make more specific call here.
        return revlog.revlog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        # Exists for the same purpose as baserevision.
        return revlog.revlog.revdiff(self, rev1, rev2)

    def addrevision(self, text, transaction, link, p1=None, p2=None, d=None):
        raise NotImplementedError
    def addgroup(self, revs, linkmapper, transaction):
        raise NotImplementedError
    def strip(self, rev, minlink):
        raise NotImplementedError
    def checksize(self):
        raise NotImplementedError

class unionchangelog(unionrevlog, changelog.changelog):
    def __init__(self, opener, opener2):
        changelog.changelog.__init__(self, opener)
        linkmapper = None
        changelog2 = changelog.changelog(opener2)
        unionrevlog.__init__(self, opener, self.indexfile, changelog2,
                             linkmapper)

    def baserevision(self, nodeorrev):
        # Although changelog doesn't override 'revision' method, some extensions
        # may replace this class with another that does. Same story with
        # manifest and filelog classes.
        return changelog.changelog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        return changelog.changelog.revdiff(self, rev1, rev2)

class unionmanifest(unionrevlog, manifest.manifestrevlog):
    def __init__(self, opener, opener2, linkmapper):
        manifest.manifestrevlog.__init__(self, opener)
        manifest2 = manifest.manifestrevlog(opener2)
        unionrevlog.__init__(self, opener, self.indexfile, manifest2,
                             linkmapper)

    def baserevision(self, nodeorrev):
        return manifest.manifestrevlog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        return manifest.manifestrevlog.revdiff(self, rev1, rev2)

class unionfilelog(unionrevlog, filelog.filelog):
    def __init__(self, opener, path, opener2, linkmapper, repo):
        filelog.filelog.__init__(self, opener, path)
        filelog2 = filelog.filelog(opener2, path)
        unionrevlog.__init__(self, opener, self.indexfile, filelog2,
                             linkmapper)
        self._repo = repo

    def baserevision(self, nodeorrev):
        return filelog.filelog.revision(self, nodeorrev)

    def baserevdiff(self, rev1, rev2):
        return filelog.filelog.revdiff(self, rev1, rev2)

    def iscensored(self, rev):
        """Check if a revision is censored."""
        if rev <= self.repotiprev:
            return filelog.filelog.iscensored(self, rev)
        node = self.node(rev)
        return self.revlog2.iscensored(self.revlog2.rev(node))

class unionpeer(localrepo.localpeer):
    def canpush(self):
        return False

class unionrepository(localrepo.localrepository):
    def __init__(self, ui, path, path2):
        localrepo.localrepository.__init__(self, ui, path)
        self.ui.setconfig('phases', 'publish', False, 'unionrepo')

        self._url = 'union:%s+%s' % (util.expandpath(path),
                                     util.expandpath(path2))
        self.repo2 = localrepo.localrepository(ui, path2)

    @localrepo.unfilteredpropertycache
    def changelog(self):
        return unionchangelog(self.svfs, self.repo2.svfs)

    def _clrev(self, rev2):
        """map from repo2 changelog rev to temporary rev in self.changelog"""
        node = self.repo2.changelog.node(rev2)
        return self.changelog.rev(node)

    def _constructmanifest(self):
        return unionmanifest(self.svfs, self.repo2.svfs,
                             self.unfiltered()._clrev)

    def url(self):
        return self._url

    def file(self, f):
        return unionfilelog(self.svfs, f, self.repo2.svfs,
                            self.unfiltered()._clrev, self)

    def close(self):
        self.repo2.close()

    def cancopy(self):
        return False

    def peer(self):
        return unionpeer(self)

    def getcwd(self):
        return os.getcwd() # always outside the repo

def instance(ui, path, create):
    if create:
        raise error.Abort(_('cannot create new union repository'))
    parentpath = ui.config("bundle", "mainreporoot", "")
    if not parentpath:
        # try to find the correct path to the working directory repo
        parentpath = cmdutil.findrepo(os.getcwd())
        if parentpath is None:
            parentpath = ''
    if parentpath:
        # Try to make the full path relative so we get a nice, short URL.
        # In particular, we don't want temp dir names in test outputs.
        cwd = os.getcwd()
        if parentpath == cwd:
            parentpath = ''
        else:
            cwd = pathutil.normasprefix(cwd)
            if parentpath.startswith(cwd):
                parentpath = parentpath[len(cwd):]
    if path.startswith('union:'):
        s = path.split(":", 1)[1].split("+", 1)
        if len(s) == 1:
            repopath, repopath2 = parentpath, s[0]
        else:
            repopath, repopath2 = s
    else:
        repopath, repopath2 = parentpath, path
    return unionrepository(ui, repopath, repopath2)