view tests/test-add.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

  $ hg init a
  $ cd a
  $ echo a > a
  $ hg add -n
  adding a
  $ hg st
  ? a
  $ hg add
  adding a
  $ hg st
  A a
  $ hg forget a
  $ hg add
  adding a
  $ hg st
  A a

  $ echo b > b
  $ hg add -n b
  $ hg st
  A a
  ? b
  $ hg add b
  $ hg st
  A a
  A b

should fail

  $ hg add b
  b already tracked!
  $ hg st
  A a
  A b

#if no-windows
  $ echo foo > con.xml
  $ hg --config ui.portablefilenames=jump add con.xml
  abort: ui.portablefilenames value is invalid ('jump')
  [255]
  $ hg --config ui.portablefilenames=abort add con.xml
  abort: filename contains 'con', which is reserved on Windows: 'con.xml'
  [255]
  $ hg st
  A a
  A b
  ? con.xml
  $ hg add con.xml
  warning: filename contains 'con', which is reserved on Windows: 'con.xml'
  $ hg st
  A a
  A b
  A con.xml
  $ hg forget con.xml
  $ rm con.xml
#endif

#if eol-in-paths
  $ echo bla > 'hello:world'
  $ hg --config ui.portablefilenames=abort add
  adding hello:world
  abort: filename contains ':', which is reserved on Windows: 'hello:world'
  [255]
  $ hg st
  A a
  A b
  ? hello:world
  $ hg --config ui.portablefilenames=ignore add
  adding hello:world
  $ hg st
  A a
  A b
  A hello:world
#endif

  $ hg ci -m 0 --traceback

  $ hg log -r "heads(. or wdir() & file('**'))"
  changeset:   0:* (glob)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     0
  
should fail

  $ hg add a
  a already tracked!

  $ echo aa > a
  $ hg ci -m 1
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo aaa > a
  $ hg ci -m 2
  created new head

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg st
  M a
  ? a.orig

wdir doesn't cause a crash, and can be dynamically selected if dirty

  $ hg log -r "heads(. or wdir() & file('**'))"
  changeset:   2147483647:ffffffffffff
  parent:      2:* (glob)
  parent:      1:* (glob)
  user:        test
  date:        * (glob)
  
should fail

  $ hg add a
  a already tracked!
  $ hg st
  M a
  ? a.orig
  $ hg resolve -m a
  (no more unresolved files)
  $ hg ci -m merge

Issue683: peculiarity with hg revert of an removed then added file

  $ hg forget a
  $ hg add a
  $ hg st
  ? a.orig
  $ hg rm a
  $ hg st
  R a
  ? a.orig
  $ echo a > a
  $ hg add a
  $ hg st
  M a
  ? a.orig

Forgotten file can be added back (as either clean or modified)

  $ hg forget b
  $ hg add b
  $ hg st -A b
  C b
  $ hg forget b
  $ echo modified > b
  $ hg add b
  $ hg st -A b
  M b
  $ hg revert -qC b

  $ hg add c && echo "unexpected addition of missing file"
  c: * (glob)
  [1]
  $ echo c > c
  $ hg add d c && echo "unexpected addition of missing file"
  d: * (glob)
  [1]
  $ hg st
  M a
  A c
  ? a.orig
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

forget and get should have the right order: added but missing dir should be
forgotten before file with same name is added

  $ echo file d > d
  $ hg add d
  $ hg ci -md
  $ hg rm d
  $ mkdir d
  $ echo a > d/a
  $ hg add d/a
  $ rm -r d
  $ hg up -C
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat d
  file d

Test that adding a directory doesn't require case matching (issue4578)
#if icasefs
  $ mkdir -p CapsDir1/CapsDir
  $ echo abc > CapsDir1/CapsDir/AbC.txt
  $ mkdir CapsDir1/CapsDir/SubDir
  $ echo def > CapsDir1/CapsDir/SubDir/Def.txt

  $ hg add capsdir1/capsdir
  adding CapsDir1/CapsDir/AbC.txt (glob)
  adding CapsDir1/CapsDir/SubDir/Def.txt (glob)

  $ hg forget capsdir1/capsdir/abc.txt
  removing CapsDir1/CapsDir/AbC.txt (glob)

  $ hg forget capsdir1/capsdir
  removing CapsDir1/CapsDir/SubDir/Def.txt (glob)

  $ hg add capsdir1
  adding CapsDir1/CapsDir/AbC.txt (glob)
  adding CapsDir1/CapsDir/SubDir/Def.txt (glob)

  $ hg ci -m "AbCDef" capsdir1/capsdir

  $ hg status -A capsdir1/capsdir
  C CapsDir1/CapsDir/AbC.txt
  C CapsDir1/CapsDir/SubDir/Def.txt

  $ hg files capsdir1/capsdir
  CapsDir1/CapsDir/AbC.txt (glob)
  CapsDir1/CapsDir/SubDir/Def.txt (glob)

  $ echo xyz > CapsDir1/CapsDir/SubDir/Def.txt
  $ hg ci -m xyz capsdir1/capsdir/subdir/def.txt

  $ hg revert -r '.^' capsdir1/capsdir
  reverting CapsDir1/CapsDir/SubDir/Def.txt (glob)

The conditional tests above mean the hash on the diff line differs on Windows
and OS X
  $ hg diff capsdir1/capsdir
  diff -r * CapsDir1/CapsDir/SubDir/Def.txt (glob)
  --- a/CapsDir1/CapsDir/SubDir/Def.txt	Thu Jan 01 00:00:00 1970 +0000
  +++ b/CapsDir1/CapsDir/SubDir/Def.txt	* (glob)
  @@ -1,1 +1,1 @@
  -xyz
  +def

  $ hg mv CapsDir1/CapsDir/abc.txt CapsDir1/CapsDir/ABC.txt
  moving CapsDir1/CapsDir/AbC.txt to CapsDir1/CapsDir/ABC.txt (glob)
  $ hg ci -m "case changing rename" CapsDir1/CapsDir/AbC.txt CapsDir1/CapsDir/ABC.txt

  $ hg status -A capsdir1/capsdir
  M CapsDir1/CapsDir/SubDir/Def.txt
  C CapsDir1/CapsDir/ABC.txt

  $ hg remove -f 'glob:**.txt' -X capsdir1/capsdir
  $ hg remove -f 'glob:**.txt' -I capsdir1/capsdir
  removing CapsDir1/CapsDir/ABC.txt (glob)
  removing CapsDir1/CapsDir/SubDir/Def.txt (glob)
#endif

  $ cd ..