view tests/test-casecollision-merge.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

#require icasefs

################################
test for branch merging
################################

test for rename awareness of case-folding collision check:

(1) colliding file is one renamed from collided file:
this is also case for issue3370.

  $ hg init branch_merge_renaming
  $ cd branch_merge_renaming

  $ echo a > a
  $ hg add a
  $ echo b > b
  $ hg add b
  $ hg commit -m '#0'
  $ hg tag -l A
  $ hg rename a tmp
  $ hg rename tmp A
  $ hg commit -m '#1'
  $ hg tag -l B
  $ hg update -q 0
  $ touch x
  $ hg add x
  $ hg commit -m '#2'
  created new head
  $ hg tag -l C

  $ hg merge -q
  $ hg status -A
  M A
  R a
  C b
  C x

  $ hg update -q --clean 1
  $ hg merge -q
  $ hg status -A
  M x
  C A
  C b
  $ hg commit -m '(D)'
  $ hg tag -l D

additional test for issue3452:

| this assumes the history below.
|
|  (A) -- (C) -- (E) -------
|      \      \             \
|       \      \             \
|         (B) -- (D) -- (F) -- (G)
|
|   A: add file 'a'
|   B: rename from 'a' to 'A'
|   C: add 'x' (or operation other than modification of 'a')
|   D: merge C into B
|   E: modify 'a'
|   F: modify 'A'
|   G: merge E into F
|
| issue3452 occurs when (B) is recorded before (C)

  $ hg update -q --clean C
  $ echo "modify 'a' at (E)" > a
  $ echo "modify 'b' at (E)" > b
  $ hg commit -m '(E)'
  created new head
  $ hg tag -l E

  $ hg update -q --clean D
  $ echo "modify 'A' at (F)" > A
  $ hg commit -m '(F)'
  $ hg tag -l F

  $ hg merge -q --tool internal:other E
  $ hg status -A
  M A
    a
  M b
  C x
  $ cat A
  modify 'a' at (E)

test also the case that (B) is recorded after (C), to prevent
regression by changes in the future.

to avoid unexpected (successful) behavior by filelog unification,
target file is not 'a'/'A' but 'b'/'B' in this case.

  $ hg update -q --clean A
  $ hg rename b tmp
  $ hg rename tmp B
  $ hg commit -m '(B1)'
  created new head
  $ hg tag -l B1

  $ hg merge -q C
  $ hg status -A
  M x
  C B
  C a
  $ hg commit -m '(D1)'
  $ hg tag -l D1

  $ echo "modify 'B' at (F1)" > B
  $ hg commit -m '(F1)'
  $ hg tag -l F1

  $ hg merge -q --tool internal:other E
  $ hg status -A
  M B
    b
  M a
  C x
  $ cat B
  modify 'b' at (E)

  $ cd ..

(2) colliding file is not related to collided file

  $ hg init branch_merge_collding
  $ cd branch_merge_collding

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg remove a
  $ hg commit -m '#1'
  $ echo A > A
  $ hg add A
  $ hg commit -m '#2'
  $ hg update --clean 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo x > x
  $ hg add x
  $ hg commit -m '#3'
  created new head
  $ echo 'modified at #4' > a
  $ hg commit -m '#4'

  $ hg merge
  abort: case-folding collision between a and A
  [255]
  $ hg parents --template '{rev}\n'
  4
  $ hg status -A
  C a
  C x
  $ cat a
  modified at #4

  $ hg update --clean 2
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg merge
  abort: case-folding collision between a and A
  [255]
  $ hg parents --template '{rev}\n'
  2
  $ hg status -A
  C A
  $ cat A
  A

test for deletion awareness of case-folding collision check (issue3648):
revision '#3' doesn't change 'a', so 'a' should be recognized as
safely removed in merging between #2 and #3.

  $ hg update --clean 3
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg status -A
  M A
  R a
  C x

  $ hg update --clean 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg merge 3
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg status -A
  M x
  C A

  $ cd ..

Prepare for tests of directory case-folding collisions

  $ hg init directory-casing
  $ cd directory-casing
  $ touch 0 # test: file without directory
  $ mkdir 0a
  $ touch 0a/f
  $ mkdir aA
  $ touch aA/a
  $ hg ci -Aqm0

Directory/file case-folding collision:

  $ hg up -q null
  $ touch 00 # test: starts as '0'
  $ mkdir 000 # test: starts as '0'
  $ touch 000/f
  $ touch Aa # test: collision with 'aA/a'
  $ hg ci -Aqm1

  $ hg merge 0
  abort: case-folding collision between Aa and directory of aA/a
  [255]
(note: no collision between 0 and 00 or 000/f)

Directory case-folding collision:

  $ hg up -qC null
  $ hg --config extensions.purge= purge
  $ mkdir 0A0
  $ touch 0A0/f # test: starts as '0a'
  $ mkdir Aa
  $ touch Aa/b # test: collision with 'aA/a'
  $ hg ci -Aqm2

  $ hg merge 0
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cd ..

################################
test for linear updates
################################

test for rename awareness of case-folding collision check:

(1) colliding file is one renamed from collided file

  $ hg init linearupdate_renameaware_1
  $ cd linearupdate_renameaware_1

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg rename a tmp
  $ hg rename tmp A
  $ hg commit -m '#1'

  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ echo 'this is added line' >> a
  $ hg update 1
  merging a and A to A
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  $ hg status -A
  M A
  $ cat A
  a
  this is added line

  $ cd ..

(2) colliding file is not related to collided file

  $ hg init linearupdate_renameaware_2
  $ cd linearupdate_renameaware_2

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg remove a
  $ hg commit -m '#1'
  $ echo A > A
  $ hg add A
  $ hg commit -m '#2'

  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  0
  $ hg status -A
  C a
  $ cat A
  a
  $ hg up -qC 2

  $ hg update --check 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  0
  $ hg status -A
  C a
  $ cat a
  a

  $ hg update --clean 2
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  2
  $ hg status -A
  C A
  $ cat A
  A

  $ cd ..

(3) colliding file is not related to collided file: added in working dir

  $ hg init linearupdate_renameaware_3
  $ cd linearupdate_renameaware_3

  $ echo a > a
  $ hg add a
  $ hg commit -m '#0'
  $ hg rename a b
  $ hg commit -m '#1'
  $ hg update 0
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

  $ echo B > B
  $ hg add B
  $ hg status
  A B
  $ hg update
  abort: case-folding collision between b and B
  [255]

  $ hg update --check
  abort: uncommitted changes
  [255]

  $ hg update --clean
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg parents --template '{rev}\n'
  1
  $ hg status -A
  C b
  $ cat b
  a

  $ cd ..