view tests/test-contrib-check-code.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

  $ cat > correct.py <<EOF
  > def toto(arg1, arg2):
  >     del arg2
  >     return (5 + 6, 9)
  > EOF
  $ cat > wrong.py <<EOF
  > def toto( arg1, arg2):
  >     del(arg2)
  >     return ( 5+6, 9)
  > EOF
  $ cat > quote.py <<EOF
  > # let's use quote in comments
  > (''' ( 4x5 )
  > but """\\''' and finally''',
  > """let's fool checkpatch""", '1+2',
  > '"""', 42+1, """and
  > ( 4-1 ) """, "( 1+1 )\" and ")
  > a, '\\\\\\\\', "\\\\\\" x-2", "c-1"
  > EOF
  $ cat > classstyle.py <<EOF
  > class newstyle_class(object):
  >     pass
  > 
  > class oldstyle_class:
  >     pass
  > 
  > class empty():
  >     pass
  > 
  > no_class = 1:
  >     pass
  > EOF
  $ check_code="$TESTDIR"/../contrib/check-code.py
  $ "$check_code" ./wrong.py ./correct.py ./quote.py ./classstyle.py
  ./wrong.py:1:
   > def toto( arg1, arg2):
   gratuitous whitespace in () or []
  ./wrong.py:2:
   >     del(arg2)
   Python keyword is not a function
  ./wrong.py:3:
   >     return ( 5+6, 9)
   gratuitous whitespace in () or []
   missing whitespace in expression
  ./quote.py:5:
   > '"""', 42+1, """and
   missing whitespace in expression
  ./classstyle.py:4:
   > class oldstyle_class:
   old-style class, use class foo(object)
  ./classstyle.py:7:
   > class empty():
   class foo() creates old style object, use class foo(object)
  [1]
  $ cat > python3-compat.py << EOF
  > foo <> bar
  > reduce(lambda a, b: a + b, [1, 2, 3, 4])
  > dict(key=value)
  > EOF
  $ "$check_code" python3-compat.py
  python3-compat.py:1:
   > foo <> bar
   <> operator is not available in Python 3+, use !=
  python3-compat.py:2:
   > reduce(lambda a, b: a + b, [1, 2, 3, 4])
   reduce is not available in Python 3+
  python3-compat.py:3:
   > dict(key=value)
   dict() is different in Py2 and 3 and is slower than {}
  [1]

  $ cat > foo.c <<EOF
  > void narf() {
  > 	strcpy(foo, bar);
  > 	// strcpy_s is okay, but this comment is not
  > 	strcpy_s(foo, bar);
  > }
  > EOF
  $ "$check_code" ./foo.c
  ./foo.c:2:
   > 	strcpy(foo, bar);
   don't use strcpy, use strlcpy or memcpy
  ./foo.c:3:
   > 	// strcpy_s is okay, but this comment is not
   don't use //-style comments
  [1]

  $ cat > is-op.py <<EOF
  > # is-operator comparing number or string literal
  > x = None
  > y = x is 'foo'
  > y = x is "foo"
  > y = x is 5346
  > y = x is -6
  > y = x is not 'foo'
  > y = x is not "foo"
  > y = x is not 5346
  > y = x is not -6
  > EOF

  $ "$check_code" ./is-op.py
  ./is-op.py:3:
   > y = x is 'foo'
   object comparison with literal
  ./is-op.py:4:
   > y = x is "foo"
   object comparison with literal
  ./is-op.py:5:
   > y = x is 5346
   object comparison with literal
  ./is-op.py:6:
   > y = x is -6
   object comparison with literal
  ./is-op.py:7:
   > y = x is not 'foo'
   object comparison with literal
  ./is-op.py:8:
   > y = x is not "foo"
   object comparison with literal
  ./is-op.py:9:
   > y = x is not 5346
   object comparison with literal
  ./is-op.py:10:
   > y = x is not -6
   object comparison with literal
  [1]

  $ cat > for-nolineno.py <<EOF
  > except:
  > EOF
  $ "$check_code" for-nolineno.py --nolineno
  for-nolineno.py:0:
   > except:
   naked except clause
  [1]

  $ cat > warning.t <<EOF
  >   $ function warnonly {
  >   > }
  >   $ diff -N aaa
  >   $ function onwarn {}
  > EOF
  $ "$check_code" warning.t
  $ "$check_code" --warn warning.t
  warning.t:1:
   >   $ function warnonly {
   warning: don't use 'function', use old style
  warning.t:3:
   >   $ diff -N aaa
   warning: don't use 'diff -N'
  warning.t:4:
   >   $ function onwarn {}
   warning: don't use 'function', use old style
  [1]
  $ cat > raise-format.py <<EOF
  > raise SomeException, message
  > # this next line is okay
  > raise SomeException(arg1, arg2)
  > EOF
  $ "$check_code" not-existing.py raise-format.py
  Skipping*not-existing.py* (glob)
  raise-format.py:1:
   > raise SomeException, message
   don't use old-style two-argument raise, use Exception(message)
  [1]

  $ cat > rst.py <<EOF
  > """problematic rst text
  > 
  > .. note::
  >     wrong
  > """
  > 
  > '''
  > 
  > .. note::
  > 
  >     valid
  > 
  > new text
  > 
  >     .. note::
  > 
  >         also valid
  > '''
  > 
  > """mixed
  > 
  > .. note::
  > 
  >   good
  > 
  >     .. note::
  >         plus bad
  > """
  > EOF
  $ $check_code -w rst.py
  rst.py:3:
   > .. note::
   warning: add two newlines after '.. note::'
  rst.py:26:
   >     .. note::
   warning: add two newlines after '.. note::'
  [1]

  $ cat > ./map-inside-gettext.py <<EOF
  > print _("map inside gettext %s" % v)
  > 
  > print _("concatenating " " by " " space %s" % v)
  > print _("concatenating " + " by " + " '+' %s" % v)
  > 
  > print _("mapping operation in different line %s"
  >         % v)
  > 
  > print _(
  >         "leading spaces inside of '(' %s" % v)
  > EOF
  $ "$check_code" ./map-inside-gettext.py
  ./map-inside-gettext.py:1:
   > print _("map inside gettext %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:3:
   > print _("concatenating " " by " " space %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:4:
   > print _("concatenating " + " by " + " '+' %s" % v)
   don't use % inside _()
  ./map-inside-gettext.py:6:
   > print _("mapping operation in different line %s"
   don't use % inside _()
  ./map-inside-gettext.py:9:
   > print _(
   don't use % inside _()
  [1]

web templates

  $ mkdir -p mercurial/templates
  $ cat > mercurial/templates/example.tmpl <<EOF
  > {desc}
  > {desc|escape}
  > {desc|firstline}
  > {desc|websub}
  > EOF

  $ "$check_code" --warnings mercurial/templates/example.tmpl
  mercurial/templates/example.tmpl:2:
   > {desc|escape}
   warning: follow desc keyword with either firstline or websub
  [1]

'string join across lines with no space' detection

  $ cat > stringjoin.py <<EOF
  > foo = (' foo'
  >        'bar foo.'
  >        'bar foo:'
  >        'bar foo@'
  >        'bar foo%'
  >        'bar foo*'
  >        'bar foo+'
  >        'bar foo-'
  >        'bar')
  > EOF

'missing _() in ui message' detection

  $ cat > uigettext.py <<EOF
  > ui.status("% 10s %05d % -3.2f %*s %%"
  >           # this use '\\\\' instead of '\\', because the latter in
  >           # heredoc on shell becomes just '\'
  >           '\\\\ \n \t \0'
  >           """12345
  >           """
  >           '''.:*+-=
  >           ''' "%-6d \n 123456 .:*+-= foobar")
  > EOF

(Checking multiple invalid files at once examines whether caching
translation table for repquote() works as expected or not. All files
should break rules depending on result of repquote(), in this case)

  $ "$check_code" stringjoin.py uigettext.py
  stringjoin.py:1:
   > foo = (' foo'
   string join across lines with no space
  stringjoin.py:2:
   >        'bar foo.'
   string join across lines with no space
  stringjoin.py:3:
   >        'bar foo:'
   string join across lines with no space
  stringjoin.py:4:
   >        'bar foo@'
   string join across lines with no space
  stringjoin.py:5:
   >        'bar foo%'
   string join across lines with no space
  stringjoin.py:6:
   >        'bar foo*'
   string join across lines with no space
  stringjoin.py:7:
   >        'bar foo+'
   string join across lines with no space
  stringjoin.py:8:
   >        'bar foo-'
   string join across lines with no space
  uigettext.py:1:
   > ui.status("% 10s %05d % -3.2f %*s %%"
   missing _() in ui message (use () to hide false-positives)
  [1]