view tests/test-convert-p4.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

#require p4

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert = " >> $HGRCPATH

create p4 depot
  $ P4ROOT=`pwd`/depot; export P4ROOT
  $ P4AUDIT=$P4ROOT/audit; export P4AUDIT
  $ P4JOURNAL=$P4ROOT/journal; export P4JOURNAL
  $ P4LOG=$P4ROOT/log; export P4LOG
  $ P4PORT=localhost:$HGPORT; export P4PORT
  $ P4DEBUG=1; export P4DEBUG

start the p4 server
  $ [ ! -d $P4ROOT ] && mkdir $P4ROOT
  $ p4d -f -J off >$P4ROOT/stdout 2>$P4ROOT/stderr &
  $ echo $! >> $DAEMON_PIDS
  $ trap "echo stopping the p4 server ; p4 admin stop" EXIT

  $ # wait for the server to initialize
  $ while ! p4 ; do
  >    sleep 1
  > done >/dev/null 2>/dev/null

create a client spec
  $ P4CLIENT=hg-p4-import; export P4CLIENT
  $ DEPOTPATH=//depot/test-mercurial-import/...
  $ p4 client -o | sed '/^View:/,$ d' >p4client
  $ echo View: >>p4client
  $ echo " $DEPOTPATH //$P4CLIENT/..." >>p4client
  $ p4 client -i <p4client
  Client hg-p4-import saved.

populate the depot
  $ echo a > a
  $ mkdir b
  $ echo c > b/c
  $ p4 add a b/c
  //depot/test-mercurial-import/a#1 - opened for add
  //depot/test-mercurial-import/b/c#1 - opened for add
  $ p4 submit -d initial
  Submitting change 1.
  Locking 2 files ...
  add //depot/test-mercurial-import/a#1
  add //depot/test-mercurial-import/b/c#1
  Change 1 submitted.

change some files
  $ p4 edit a
  //depot/test-mercurial-import/a#1 - opened for edit
  $ echo aa >> a
  $ p4 submit -d "change a"
  Submitting change 2.
  Locking 1 files ...
  edit //depot/test-mercurial-import/a#2
  Change 2 submitted.

  $ p4 edit b/c
  //depot/test-mercurial-import/b/c#1 - opened for edit
  $ echo cc >> b/c
  $ p4 submit -d "change b/c"
  Submitting change 3.
  Locking 1 files ...
  edit //depot/test-mercurial-import/b/c#2
  Change 3 submitted.

convert
  $ hg convert -s p4 $DEPOTPATH dst
  initializing destination dst repository
  reading p4 views
  collecting p4 changelists
  1 initial
  2 change a
  3 change b/c
  scanning source...
  sorting...
  converting...
  2 initial
  1 change a
  0 change b/c
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=2 desc="change b/c" tags="tip" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

change some files
  $ p4 edit a b/c
  //depot/test-mercurial-import/a#2 - opened for edit
  //depot/test-mercurial-import/b/c#2 - opened for edit
  $ echo aaa >> a
  $ echo ccc >> b/c
  $ p4 submit -d "change a b/c"
  Submitting change 4.
  Locking 2 files ...
  edit //depot/test-mercurial-import/a#3
  edit //depot/test-mercurial-import/b/c#3
  Change 4 submitted.

convert again
  $ hg convert -s p4 $DEPOTPATH dst
  reading p4 views
  collecting p4 changelists
  1 initial
  2 change a
  3 change b/c
  4 change a b/c
  scanning source...
  sorting...
  converting...
  0 change a b/c
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=3 desc="change a b/c" tags="tip" files="a b/c"
  rev=2 desc="change b/c" tags="" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

interesting names
  $ echo dddd > "d d"
  $ mkdir " e"
  $ echo fff >" e/ f"
  $ p4 add "d d" " e/ f"
  //depot/test-mercurial-import/d d#1 - opened for add
  //depot/test-mercurial-import/ e/ f#1 - opened for add
  $ p4 submit -d "add d e f"
  Submitting change 5.
  Locking 2 files ...
  add //depot/test-mercurial-import/ e/ f#1
  add //depot/test-mercurial-import/d d#1
  Change 5 submitted.

convert again
  $ hg convert -s p4 $DEPOTPATH dst
  reading p4 views
  collecting p4 changelists
  1 initial
  2 change a
  3 change b/c
  4 change a b/c
  5 add d e f
  scanning source...
  sorting...
  converting...
  0 add d e f
  $ hg -R dst log --template 'rev={rev} desc="{desc}" tags="{tags}" files="{files}"\n'
  rev=4 desc="add d e f" tags="tip" files=" e/ f d d"
  rev=3 desc="change a b/c" tags="" files="a b/c"
  rev=2 desc="change b/c" tags="" files="b/c"
  rev=1 desc="change a" tags="" files="a"
  rev=0 desc="initial" tags="" files="a b/c"

exit trap:
  stopping the p4 server