view tests/test-convert-svn-source.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

#require svn svn-bindings

  $ filter_svn_output () {
  >     egrep -v 'Committing|Updating|(^$)' | sed -e 's/done$//' || true
  > }

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > [convert]
  > svn.trunk = mytrunk
  > EOF

  $ svnadmin create svn-repo
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`$PYTHON -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif
  $ INVALIDREVISIONID=svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1
  $ VALIDREVISIONID=svn:a2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk/mytrunk@1

Now test that it works with trunk/tags layout, but no branches yet.

Initial svn import

  $ mkdir projB
  $ cd projB
  $ mkdir mytrunk
  $ mkdir tags
  $ cd ..

  $ svn import -m "init projB" projB "$SVNREPOURL/proj%20B" | filter_svn_output | sort
  Adding         projB/mytrunk (glob)
  Adding         projB/tags (glob)
  Committed revision 1.

Update svn repository

  $ svn co "$SVNREPOURL/proj%20B/mytrunk" B | filter_svn_output
  Checked out revision 1.
  $ cd B
  $ echo hello > 'letter .txt'
  $ svn add 'letter .txt' | filter_svn_output
  A         letter .txt
  $ svn ci -m hello | filter_svn_output
  Adding         letter .txt
  Transmitting file data .
  Committed revision 2.

  $ svn-safe-append.py world 'letter .txt'
  $ svn ci -m world | filter_svn_output
  Sending        letter .txt
  Transmitting file data .
  Committed revision 3.

  $ svn copy -m "tag v0.1" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.1" | filter_svn_output
  Committed revision 4.

  $ svn-safe-append.py 'nice day today!' 'letter .txt'
  $ svn ci -m "nice day" | filter_svn_output
  Sending        letter .txt
  Transmitting file data .
  Committed revision 5.
  $ cd ..

Convert to hg once and also test localtimezone option

NOTE: This doesn't check all time zones -- it merely determines that
the configuration option is taking effect.

An arbitrary (U.S.) time zone is used here.  TZ=US/Hawaii is selected
since it does not use DST (unlike other U.S. time zones) and is always
a fixed difference from UTC.

  $ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
  initializing destination B-hg repository
  scanning source...
  sorting...
  converting...
  3 init projB
  2 hello
  1 world
  0 nice day
  updating tags

Update svn repository again

  $ cd B
  $ svn-safe-append.py "see second letter" 'letter .txt'
  $ echo "nice to meet you" > letter2.txt
  $ svn add letter2.txt | filter_svn_output
  A         letter2.txt
  $ svn ci -m "second letter" | filter_svn_output
  Sending        letter .txt
  Adding         letter2.txt
  Transmitting file data ..
  Committed revision 6.

  $ svn copy -m "tag v0.2" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.2" | filter_svn_output
  Committed revision 7.

  $ svn-safe-append.py "blah-blah-blah" letter2.txt
  $ svn ci -m "work in progress" | filter_svn_output
  Sending        letter2.txt
  Transmitting file data .
  Committed revision 8.
  $ cd ..

  $ hg convert -s svn "$SVNREPOURL/proj%20B/non-existent-path" dest
  initializing destination dest repository
  abort: no revision found in module /proj B/non-existent-path
  [255]

########################################

Test incremental conversion

  $ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
  scanning source...
  sorting...
  converting...
  1 second letter
  0 work in progress
  updating tags

  $ cd B-hg
  $ hg log -G --template '{rev} {desc|firstline} date: {date|date} files: {files}\n'
  o  7 update tags date: * +0000 files: .hgtags (glob)
  |
  o  6 work in progress date: * -1000 files: letter2.txt (glob)
  |
  o  5 second letter date: * -1000 files: letter .txt letter2.txt (glob)
  |
  o  4 update tags date: * +0000 files: .hgtags (glob)
  |
  o  3 nice day date: * -1000 files: letter .txt (glob)
  |
  o  2 world date: * -1000 files: letter .txt (glob)
  |
  o  1 hello date: * -1000 files: letter .txt (glob)
  |
  o  0 init projB date: * -1000 files: (glob)
  
  $ hg tags -q
  tip
  v0.2
  v0.1
  $ cd ..

Test filemap
  $ echo 'include letter2.txt' > filemap
  $ hg convert --filemap filemap "$SVNREPOURL/proj%20B/mytrunk" fmap
  initializing destination fmap repository
  scanning source...
  sorting...
  converting...
  5 init projB
  4 hello
  3 world
  2 nice day
  1 second letter
  0 work in progress
  $ hg -R fmap branch -q
  default
  $ hg log -G -R fmap --template '{rev} {desc|firstline} files: {files}\n'
  o  1 work in progress files: letter2.txt
  |
  o  0 second letter files: letter2.txt
  
Convert with --full adds and removes files that didn't change

  $ cd B
  $ echo >> "letter .txt"
  $ svn ci -m 'nothing' | filter_svn_output
  Sending        letter .txt
  Transmitting file data .
  Committed revision 9.
  $ cd ..

  $ echo 'rename letter2.txt letter3.txt' > filemap
  $ hg convert --filemap filemap --full "$SVNREPOURL/proj%20B/mytrunk" fmap
  scanning source...
  sorting...
  converting...
  0 nothing
  $ hg -R fmap st --change tip
  A letter .txt
  A letter3.txt
  R letter2.txt

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $INVALIDREVISIONID $VALIDREVISIONID
  > EOF
  $ hg convert --splicemap splicemap "$SVNREPOURL/proj%20B/mytrunk" smap
  initializing destination smap repository
  abort: splicemap entry svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1 is not a valid revision identifier
  [255]

Test stop revision
  $ hg convert --rev 1 "$SVNREPOURL/proj%20B/mytrunk" stoprev
  initializing destination stoprev repository
  scanning source...
  sorting...
  converting...
  0 init projB
  $ hg -R stoprev branch -q
  default

Check convert_revision extra-records.
This is also the only place testing more than one extra field in a revision.

  $ cd stoprev
  $ hg tip --debug | grep extra
  extra:       branch=default
  extra:       convert_revision=svn:........-....-....-....-............/proj B/mytrunk@1 (re)
  $ cd ..

Test converting empty heads (issue3347).
Also tests getting logs directly without debugsvnlog.

  $ svnadmin create svn-empty
  $ svnadmin load -q svn-empty < "$TESTDIR/svn/empty.svndump"
  $ hg --config convert.svn.trunk= --config convert.svn.debugsvnlog=0 convert svn-empty
  assuming destination svn-empty-hg
  initializing destination svn-empty-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir
  $ hg --config convert.svn.trunk= convert "$SVNREPOURL/../svn-empty/trunk"
  assuming destination trunk-hg
  initializing destination trunk-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir

Test that a too-new repository format is properly rejected:
  $ mv svn-empty/format format
  $ echo 999 > svn-empty/format
It's important that this command explicitly specify svn, otherwise it
can have surprising side effects (like falling back to a perforce
depot that can be seen from the test environment and slurping from that.)
  $ hg convert --source-type svn svn-empty this-will-fail
  initializing destination this-will-fail repository
  file:/*/$TESTTMP/svn-empty does not look like a Subversion repository to libsvn version 1.*.* (glob)
  abort: svn-empty: missing or unsupported repository
  [255]
  $ mv format svn-empty/format