view tests/test-mq-qrefresh-replace-log-message.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

Environment setup for MQ

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [defaults]
  > # explicit date to commit with fixed hashid
  > qnew = -d "0 0"
  > qrefresh = -d "0 0"
  > qfold = -d "0 0"
  > EOF
  $ hg init
  $ hg qinit

Should fail if no patches applied
(this tests also that editor is not invoked if '--edit' is not
specified)

  $ hg qrefresh
  no patches applied
  [1]
  $ hg qrefresh -e
  no patches applied
  [1]
  $ hg qnew -m "First commit message" first-patch
  $ echo aaaa > file
  $ hg add file
  $ HGEDITOR=cat hg qrefresh

Should display 'First commit message'

  $ hg log -l1 --template "{desc}\n"
  First commit message

Testing changing message with -m
(this tests also that '--edit' can be used with '--message', and
that '[committemplate] changeset' definition and commit log specific
template keyword 'extramsg' work well)

  $ cat >> .hg/hgrc <<EOF
  > [committemplate]
  > listupfiles = {file_adds %
  >    "HG: added {file}\n"     }{file_mods %
  >    "HG: changed {file}\n"   }{file_dels %
  >    "HG: removed {file}\n"   }{if(files, "",
  >    "HG: no files changed\n")}
  > 
  > changeset = HG: this is customized commit template
  >     {desc}\n\n
  >     HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  >     HG: {extramsg}
  >     HG: --
  >     HG: user: {author}
  >     HG: branch '{branch}'\n{listupfiles}
  > EOF

  $ echo bbbb > file
  $ HGEDITOR=cat hg qrefresh -m "Second commit message" -e
  HG: this is customized commit template
  Second commit message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file

  $ cat >> .hg/hgrc <<EOF
  > # disable customizing for subsequent tests
  > [committemplate]
  > changeset =
  > EOF

Should display 'Second commit message'

  $ hg log -l1 --template "{desc}\n"
  Second commit message

Testing changing message with -l

  $ echo "Third commit message" > logfile
  $ echo " This is the 3rd log message" >> logfile
  $ echo bbbb > file
  $ hg qrefresh -l logfile

Should display 'Third commit message\\\n This is the 3rd log message'

  $ hg log -l1 --template "{desc}\n"
  Third commit message
   This is the 3rd log message

Testing changing message with -l-

  $ hg qnew -m "First commit message" second-patch
  $ echo aaaa > file2
  $ hg add file2
  $ echo bbbb > file2
  $ (echo "Fifth commit message"; echo " This is the 5th log message") | hg qrefresh -l-

Should display 'Fifth commit message\\\n This is the 5th log message'

  $ hg log -l1 --template "{desc}\n"
  Fifth commit message
   This is the 5th log message

Test saving last-message.txt:

  $ cat > $TESTTMP/editor.sh << EOF
  > echo "==== before editing"
  > cat \$1
  > echo "===="
  > (echo; echo "test saving last-message.txt") >> \$1
  > EOF

  $ cat > $TESTTMP/commitfailure.py <<EOF
  > from mercurial import error
  > def reposetup(ui, repo):
  >     class commitfailure(repo.__class__):
  >         def commit(self, *args, **kwargs):
  >             raise error.Abort('emulating unexpected abort')
  >     repo.__class__ = commitfailure
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > # this failure occurs before editor invocation
  > commitfailure = $TESTTMP/commitfailure.py
  > EOF

  $ hg qapplied
  first-patch
  second-patch
  $ hg tip --template "{files}\n"
  file2

(test that editor is not invoked before transaction starting)

  $ rm -f .hg/last-message.txt
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: emulating unexpected abort
  [255]
  $ test -f .hg/last-message.txt
  [1]

(reset applied patches and directory status)

  $ cat >> .hg/hgrc <<EOF
  > [extensions]
  > commitfailure = !
  > EOF

  $ hg qapplied
  first-patch
  $ hg status -A file2
  ? file2
  $ rm file2
  $ hg qpush -q second-patch
  now at: second-patch

(test that editor is invoked and commit message is saved into
"last-message.txt")

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > # this failure occurs after editor invocation
  > pretxncommit.unexpectedabort = false
  > EOF

  $ rm -f .hg/last-message.txt
  $ hg status --rev "second-patch^1" -arm
  A file2
  $ HGEDITOR="sh $TESTTMP/editor.sh" hg qrefresh -e
  ==== before editing
  Fifth commit message
   This is the 5th log message
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to use default message.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added file2
  ====
  note: commit message saved in .hg/last-message.txt
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]
  $ cat .hg/last-message.txt
  Fifth commit message
   This is the 5th log message
  
  
  
  test saving last-message.txt

Test visibility of in-memory dirstate changes outside transaction to
external process

  $ cat > $TESTTMP/checkvisibility.sh <<EOF
  > echo "===="
  > hg parents --template "{rev}:{node|short}\n"
  > hg status -arm
  > echo "===="
  > EOF

== test visibility to external editor

  $ hg update -C -q first-patch
  $ rm -f file2
  $ hg qpush -q second-patch --config hooks.pretxncommit.unexpectedabort=
  now at: second-patch
  $ echo bbbb >> file2

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  1:e30108269082
  M file2
  ====

  $ HGEDITOR="sh \"$TESTTMP/checkvisibility.sh\"" hg qrefresh -e
  ====
  0:25e397dabed2
  A file2
  ====
  note: commit message saved in .hg/last-message.txt
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]

(rebuilding at failure of qrefresh bases on rev #0, and it causes
dropping status of "file2")

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  0:25e397dabed2
  ====

== test visibility to precommit external hook

  $ hg update -C -q
  $ rm -f file2
  $ hg qpush -q second-patch --config hooks.pretxncommit.unexpectedabort=
  now at: second-patch
  $ echo bbbb >> file2

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > precommit.checkvisibility = sh "$TESTTMP/checkvisibility.sh"
  > EOF

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  1:e30108269082
  M file2
  ====

  $ hg qrefresh
  ====
  0:25e397dabed2
  A file2
  ====
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  0:25e397dabed2
  ====

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > precommit.checkvisibility =
  > EOF

== test visibility to pretxncommit external hook

  $ hg update -C -q
  $ rm -f file2
  $ hg qpush -q second-patch --config hooks.pretxncommit.unexpectedabort=
  now at: second-patch
  $ echo bbbb >> file2

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > pretxncommit.checkvisibility = sh "$TESTTMP/checkvisibility.sh"
  > # make checkvisibility run before unexpectedabort
  > priority.pretxncommit.checkvisibility = 10
  > EOF

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  1:e30108269082
  M file2
  ====

  $ hg qrefresh
  ====
  0:25e397dabed2
  A file2
  ====
  transaction abort!
  rollback completed
  qrefresh interrupted while patch was popped! (revert --all, qpush to recover)
  abort: pretxncommit.unexpectedabort hook exited with status 1
  [255]

  $ sh "$TESTTMP/checkvisibility.sh"
  ====
  0:25e397dabed2
  ====

  $ cat >> .hg/hgrc <<EOF
  > [hooks]
  > pretxncommit.checkvisibility =
  > EOF