view tests/test-obsolete-checkheads.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

Check that obsolete properly strip heads
  $ cat >> $HGRCPATH << EOF
  > [phases]
  > # public changeset are not obsolete
  > publish=false
  > [ui]
  > logtemplate='{node|short} ({phase}) {desc|firstline}\n'
  > [experimental]
  > evolution=createmarkers
  > EOF
  $ mkcommit() {
  >    echo "$1" > "$1"
  >    hg add "$1"
  >    hg ci -m "add $1"
  > }
  $ getid() {
  >    hg id --debug -ir "desc('$1')"
  > }


  $ hg init remote
  $ cd remote
  $ mkcommit base
  $ hg phase --public .
  $ cd ..
  $ cp -r remote base
  $ hg clone remote local
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local

New head replaces old head
==========================

setup
(we add the 1 flags to prevent bumped error during the test)

  $ mkcommit old
  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg up -q '.^'
  $ mkcommit new
  created new head
  $ hg debugobsolete --flags 1 `getid old` `getid new`
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  
  $ cp -r ../remote ../backup1

old exists remotely as draft. It is obsoleted by new that we now push.
Push should not warn about creating new head

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

old head is now public (public local version)
=============================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ hg -R ../remote phase --public c70b08862e08
  $ hg pull -v
  pulling from $TESTTMP/remote (glob)
  searching for changes
  no changes found
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  | o  c70b08862e08 (public) add old
  |/
  o  b4952fcf48cf (public) add base
  

Abort: old will still be an head because it's public.

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  abort: push creates new remote head 71e3228bffe1!
  (merge or see 'hg help push' for details about pushing new heads)
  [255]

old head is now public (public remote version)
==============================================

TODO: Not implemented yet.

# setup
#
#   $ rm -fr ../remote
#   $ cp -r ../backup1 ../remote
#   $ hg -R ../remote phase --public c70b08862e08
#   $ hg phase --draft --force c70b08862e08
#   $ hg log -G --hidden
#   @  71e3228bffe1 (draft) add new
#   |
#   | x  c70b08862e08 (draft) add old
#   |/
#   o  b4952fcf48cf (public) add base
#
#
#
# Abort: old will still be an head because it's public.
#
#   $ hg push
#   pushing to $TESTTMP/remote
#   searching for changes
#   abort: push creates new remote head 71e3228bffe1!
#   (merge or see 'hg help push' for details about pushing new heads)
#   [255]

old head is obsolete but replacement is not pushed
==================================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ hg phase --draft --force '(0::) - 0'
  $ hg up -q '.^'
  $ mkcommit other
  created new head
  $ hg log -G --hidden
  @  d7d41ccbd4de (draft) add other
  |
  | o  71e3228bffe1 (draft) add new
  |/
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  

old exists remotely as draft. It is obsoleted by new but we don't push new.
Push should abort on new head

  $ hg push -r 'desc("other")'
  pushing to $TESTTMP/remote (glob)
  searching for changes
  abort: push creates new remote head d7d41ccbd4de!
  (merge or see 'hg help push' for details about pushing new heads)
  [255]



Both precursors and successors are already know remotely. Descendant adds heads
===============================================================================

setup. (The obsolete marker is known locally only

  $ cd ..
  $ rm -rf local
  $ hg clone remote local
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local
  $ mkcommit old
  old already tracked!
  nothing changed
  [1]
  $ hg up -q '.^'
  $ mkcommit new
  created new head
  $ hg push -f
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  $ mkcommit desc1
  $ hg up -q '.^'
  $ mkcommit desc2
  created new head
  $ hg debugobsolete `getid old` `getid new`
  $ hg log -G --hidden
  @  5fe37041cc2b (draft) add desc2
  |
  | o  a3ef1d111c5f (draft) add desc1
  |/
  o  71e3228bffe1 (draft) add new
  |
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  
  $ hg log -G --hidden -R ../remote
  o  71e3228bffe1 (draft) add new
  |
  | o  c70b08862e08 (draft) add old
  |/
  @  b4952fcf48cf (public) add base
  
  $ cp -r ../remote ../backup2

Push should not warn about adding new heads. We create one, but we'll delete
one anyway.

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)


Remote head is unknown but obsoleted by a local changeset
=========================================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ cd ..
  $ rm -rf local
  $ hg clone remote local -r 0
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local
  $ mkcommit new
  $ hg -R ../remote id --debug -r tip
  c70b08862e0838ea6d7c59c85da2f1ed6c8d67da tip
  $ hg  id --debug -r tip
  71e3228bffe1886550777233d6c97bb5a6b2a650 tip
  $ hg debugobsolete c70b08862e0838ea6d7c59c85da2f1ed6c8d67da 71e3228bffe1886550777233d6c97bb5a6b2a650
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  o  b4952fcf48cf (public) add base
  
  $ hg log -G --hidden -R ../remote
  o  c70b08862e08 (draft) add old
  |
  @  b4952fcf48cf (public) add base
  

Push should not complain about new heads.

  $ hg push --traceback
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)