view tests/test-pull-branch.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am1 # 0
  adding foo
  $ hg branch branchA
  marked working directory as branch branchA
  (branches are permanent and global, did you want a bookmark?)
  $ echo a1 > foo
  $ hg ci -ma1 # 1

  $ cd ..
  $ hg init tt
  $ cd tt
  $ hg pull ../t
  pulling from ../t
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ echo a2 > foo
  $ hg ci -ma2 # 2

Create branch B:

  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchB
  marked working directory as branch branchB
  $ echo b1 > foo
  $ hg ci -mb1 # 3

  $ cd ../tt

A new branch is there

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Develop both branches:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a3 > foo
  $ hg ci -ma3 # 4
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b2 > foo
  $ hg ci -mb2 # 5

  $ cd ../tt

Should succeed, no new heads:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Add a head on other branch:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a4 > foo
  $ hg ci -ma4 # 6
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.1 > foo
  $ hg ci -m b3.1 # 7
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.2 > foo
  $ hg ci -m b3.2 # 8
  created new head

  $ cd ../tt

Should succeed because there is only one head on our branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ hg up -C branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.1 > foo
  $ hg ci -ma5.1 # 9
  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.2 > foo
  $ hg ci -ma5.2 # 10
  created new head
  $ hg up 7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.1 > foo
  $ hg ci -m b4.1 # 11
  $ hg up -C 8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.2 > foo
  $ hg ci -m b4.2 # 12

  $ cd ../tt

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  1 other heads for branch "branchA"

Make changes on new branch on tt

  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchC
  marked working directory as branch branchC
  $ echo b1 > bar
  $ hg ci -Am "commit on branchC on tt"
  adding bar

Make changes on default branch on t

  $ cd ../t
  $ hg up -C default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar
  $ hg ci -Am "commit on default on t"
  adding bar

Pull branchC from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)

Make changes on default and branchC on tt

  $ cd ../tt
  $ hg pull ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg up -C default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar1
  $ hg ci -Am "commit on default on tt"
  adding bar1
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar2
  $ hg ci -Am "commit on branchC on tt"
  adding bar2

Make changes on default and branchC on t

  $ cd ../t
  $ hg up default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar3
  $ hg ci -Am "commit on default on t"
  adding bar3
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar4
  $ hg ci -Am "commit on branchC on tt"
  adding bar4

Pull from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+2 heads)
  (run 'hg heads .' to see heads, 'hg merge' to merge)

  $ cd ..