view tests/test-pull-update.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am m
  adding foo

  $ cd ..
  $ hg clone t tt
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd tt
  $ echo 1.1 > foo
  $ hg ci -Am m

  $ cd ../t
  $ echo 1.2 > foo
  $ hg ci -Am m

Should not update to the other topological branch:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  1 other heads for branch "default"

  $ cd ../tt

Should not update to the other branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  1 other heads for branch "default"

  $ HGMERGE=true hg merge
  merging foo
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mm

  $ cd ../t

Should work:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Similarity between "hg update" and "hg pull -u" in handling bookmark
====================================================================

Test that updating activates the bookmark, which matches with the
explicit destination of the update.

  $ echo 4 >> foo
  $ hg commit -m "#4"
  $ hg bookmark active-after-pull
  $ cd ../tt

(1) activating by --rev BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r active-after-pull
  pulling from $TESTTMP/t (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  adding remote bookmark active-after-pull
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) activating by URL#BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#active-after-pull
  pulling from $TESTTMP/t (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  adding remote bookmark active-after-pull
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

Test that updating deactivates current active bookmark, if the
destination of the update is explicitly specified, and it doesn't
match with the name of any existing bookmarks.

  $ cd ../t
  $ hg bookmark -d active-after-pull
  $ hg branch bar -q
  $ hg commit -m "#5 (bar #1)"
  $ cd ../tt

(1) deactivating by --rev REV

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r b5e4babfaaa7
  pulling from $TESTTMP/t (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) deactivating by --branch BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -b bar
  pulling from $TESTTMP/t (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(3) deactivating by URL#ANOTHER-BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#bar
  pulling from $TESTTMP/t (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

  $ cd ..