view tests/test-remove.t @ 30446:b324b4e431e5

posix: give checkexec a fast path; keep the check files and test read only

Before, Mercurial would create a new temporary file every time, stat it, change
its exec mode, stat it again, and delete it. Most of this dance was done to
handle the rare and not-so-essential case of VFAT mounts on unix. The cost of
that was paid by the much more common and important case of using normal file
systems.

Instead, try to create and preserve .hg/cache/checkisexec and
.hg/cache/checknoexec with and without exec flag set. If the files exist and
have correct exec flags set, we can conclude that that file system supports the
exec flag. Best case, the whole exec check can thus be done with two stat
calls. Worst case, we delete the wrong files and check as usual. That will be
because temporary loss of exec bit or on file systems without support for the
exec bit. In that case we check as we did before, with the additional overhead
of one extra stat call.

It is possible that this different test algorithm in some cases on odd file
systems will give different behaviour. Again, I think it will be rare and
special cases and I think it is worth the risk.

test-clone.t happens to show the situation where checkisexec is left behind
from the old style check, while checknoexec only will be created next time a
exec check will be performed.

  $ remove() {
  >     hg rm $@
  >     echo "exit code: $?"
  >     hg st
  >     # do not use ls -R, which recurses in .hg subdirs on Mac OS X 10.5
  >     find . -name .hg -prune -o -type f -print | sort
  >     hg up -C
  > }

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > disable=False
  > assume-tty = 1
  > delay = 0
  > # set changedelay really large so we don't see nested topics
  > changedelay = 30000
  > format = topic bar number
  > refresh = 0
  > width = 60
  > EOF

  $ hg init a
  $ cd a
  $ echo a > foo

file not managed

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is untracked
  exit code: 1
  ? foo
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg add foo
  $ hg commit -m1

the table cases
00 state added, options none

  $ echo b > bar
  $ hg add bar
  $ remove bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file has been marked for add (use 'hg forget' to undo add)
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

01 state clean, options none

  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

02 state modified, options none

  $ echo b >> foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file is modified (use -f to force removal)
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

03 state missing, options none

  $ rm foo
  $ remove foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

10 state added, options -f

  $ echo b > bar
  $ hg add bar
  $ remove -f bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

11 state clean, options -f

  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

12 state modified, options -f

  $ echo b >> foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

13 state missing, options -f

  $ rm foo
  $ remove -f foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

20 state added, options -A

  $ echo b > bar
  $ hg add bar
  $ remove -A bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing bar: file still exists
  exit code: 1
  A bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

21 state clean, options -A

  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved

22 state modified, options -A

  $ echo b >> foo
  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing foo: file still exists
  exit code: 1
  M foo
  ? bar
  ./bar
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

23 state missing, options -A

  $ rm foo
  $ remove -A foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ? bar
  ./bar
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

30 state added, options -Af

  $ echo b > bar
  $ hg add bar
  $ remove -Af bar
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  ? bar
  ./bar
  ./foo
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar

31 state clean, options -Af

  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

32 state modified, options -Af

  $ echo b >> foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

33 state missing, options -Af

  $ rm foo
  $ remove -Af foo
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  exit code: 0
  R foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

test some directory stuff

  $ mkdir test
  $ echo a > test/foo
  $ echo b > test/bar
  $ hg ci -Am2
  adding test/bar
  adding test/foo

dir, options none

  $ rm test/bar
  $ remove test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -f

  $ rm test/bar
  $ remove -f test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -A

  $ rm test/bar
  $ remove -A test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  skipping [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  not removing test/foo: file still exists (glob)
  exit code: 1
  R test/bar
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

dir, options -Af

  $ rm test/bar
  $ remove -Af test
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [=====================>                      ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing test/bar (glob)
  removing test/foo (glob)
  exit code: 0
  R test/bar
  R test/foo
  ./foo
  ./test/foo
  \r (no-eol) (esc)
  updating [===========================================>] 2/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

test remove dropping empty trees (issue1861)

  $ mkdir -p issue1861/b/c
  $ echo x > issue1861/x
  $ echo y > issue1861/b/c/y
  $ hg ci -Am add
  adding issue1861/b/c/y
  adding issue1861/x
  $ hg rm issue1861/b
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing issue1861/b/c/y (glob)
  $ hg ci -m remove
  $ ls issue1861
  x

test that commit does not crash if the user removes a newly added file

  $ touch f1
  $ hg add f1
  $ rm f1
  $ hg ci -A -mx
  removing f1
  nothing changed
  [1]

handling of untracked directories and missing files

  $ mkdir d1
  $ echo a > d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  not removing d1: no tracked files
  [1]
  $ hg add d1/a
  $ rm d1/a
  $ hg rm --after d1
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  removing d1/a (glob)

  $ hg rm --after nosuch
  nosuch: * (glob)
  \r (no-eol) (esc)
  deleting [===========================================>] 1/1\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
  [1]