py: error out if a "skip" character was given with non-dict to util.dirs()
util.dirs() keeps track of the directories in its input collection. If
a "skip" character is given to it, it will assume the input is a
dirstate map and it will skip entries that are in the given "skip"
state. I think this is used only for skipping removed entries ("r") in
the dirtate. The C implementation of util.dirs() errors out if it was
given a skip character and a non-dict was passed. The pure
implementation simply ignored the request skip state. Let's make it
easier to discover bugs here by erroring out in the pure
implementation too. Let's also switch to checking for the dict-ness,
to make the C implementation (since that's clearly been sufficient for
many years). This last change makes test-
issue660.t pass on py3 in
pure mode, since the old check was for existence of iteritems(), which
doesn't exist on py3.
Differential Revision: https://phab.mercurial-scm.org/D6669
$ echo "[extensions]" >> $HGRCPATH
$ echo "mq=" >> $HGRCPATH
$ hg init
$ hg qinit
$ echo x > x
$ hg ci -Ama
adding x
$ hg qnew a.patch
$ echo a > a
$ hg add a
$ hg qrefresh
$ hg qnew b.patch
$ echo b > b
$ hg add b
$ hg qrefresh
$ hg qnew c.patch
$ echo c > c
$ hg add c
$ hg qrefresh
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
should fail
$ hg qguard does-not-exist.patch +bleh
abort: no patch named does-not-exist.patch
[255]
should fail
$ hg qguard +fail
abort: no patches applied
[255]
$ hg qpush
applying a.patch
now at: a.patch
should guard a.patch
$ hg qguard +a
should print +a
$ hg qguard
a.patch: +a
$ hg qpop
popping a.patch
patch queue now empty
should fail
$ hg qpush a.patch
cannot push 'a.patch' - guarded by '+a'
[1]
$ hg qguard a.patch
a.patch: +a
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop
popping b.patch
patch queue now empty
test selection of an empty guard
$ hg qselect ""
abort: guard cannot be an empty string
[255]
$ hg qselect a
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qguard -- c.patch -a
should print -a
$ hg qguard c.patch
c.patch: -a
should skip c.patch
$ hg qpush -a
applying b.patch
skipping c.patch - guarded by '-a'
now at: b.patch
$ hg qnext
all patches applied
[1]
should display b.patch
$ hg qtop
b.patch
$ hg qguard -n c.patch
should push c.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
popping a.patch
patch queue now empty
$ hg qselect -n
guards deactivated
number of unguarded, unapplied patches has changed from 3 to 2
should push all
$ hg qpush -a
applying b.patch
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qguard a.patch +1
$ hg qguard b.patch +2
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
should push a.patch, not b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying c.patch
now at: c.patch
$ hg qpop -a
popping c.patch
popping a.patch
patch queue now empty
$ hg qselect 2
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qprev
b.patch
Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.
$ hg qtop
c.patch
$ hg qpop -a
popping c.patch
popping b.patch
patch queue now empty
$ hg qselect 1 2
number of unguarded, unapplied patches has changed from 2 to 3
should push a.patch, b.patch
$ hg qpush
applying a.patch
now at: a.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpop -a
popping b.patch
popping a.patch
patch queue now empty
$ hg qguard -- a.patch +1 +2 -3
$ hg qselect 1 2 3
number of unguarded, unapplied patches has changed from 3 to 2
list patches and guards
$ hg qguard -l
a.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
have at least one patch applied to test coloring
$ hg qpush
applying b.patch
now at: b.patch
list patches and guards with color
$ hg --config extensions.color= qguard --config color.mode=ansi \
> -l --color=always
\x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
\x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
\x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)
should pop b.patch
$ hg qpop
popping b.patch
patch queue now empty
list series
$ hg qseries -v
0 G a.patch
1 U b.patch
2 U c.patch
list guards
$ hg qselect
1
2
3
should push b.patch
$ hg qpush
applying b.patch
now at: b.patch
$ hg qpush -a
applying c.patch
now at: c.patch
$ hg qselect -n --reapply -v
guards deactivated
popping guarded patches
popping c.patch
popping b.patch
patch queue now empty
reapplying unguarded patches
skipping a.patch - guarded by '+1' '+2'
skipping b.patch - guarded by '+2'
skipping a.patch - guarded by '+1' '+2'
skipping b.patch - guarded by '+2'
applying c.patch
patching file c
adding c
committing files:
c
committing manifest
committing changelog
now at: c.patch
guards in series file: +1 +2 -3
$ hg qselect -s
+1
+2
-3
should show c.patch
$ hg qapplied
c.patch
$ hg qrename a.patch new.patch
should show :
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
$ hg qnew d.patch
$ hg qpop
popping d.patch
now at: c.patch
should show new.patch and b.patch as Guarded, c.patch as Applied
and d.patch as Unapplied
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 U d.patch
qseries again, but with color
$ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
3 U \x1b[0;30;1md.patch\x1b[0m (esc)
$ hg qguard d.patch +2
new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.
$ hg qseries -v
0 G new.patch
1 G b.patch
2 A c.patch
3 G d.patch
$ qappunappv()
> {
> for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
> echo % hg $command
> hg $command
> done
> }
$ hg qpop -a
popping c.patch
patch queue now empty
$ hg qguard -l
new.patch: +1 +2 -3
b.patch: +2
c.patch: unguarded
d.patch: +2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
c.patch
% hg qunapplied -v
0 G new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qselect 1
number of unguarded, unapplied patches has changed from 1 to 2
$ qappunappv
% hg qapplied
% hg qapplied -v
% hg qunapplied
new.patch
c.patch
% hg qunapplied -v
0 U new.patch
1 G b.patch
2 U c.patch
3 G d.patch
$ hg qpush -a
applying new.patch
skipping b.patch - guarded by '+2'
applying c.patch
skipping d.patch - guarded by '+2'
now at: c.patch
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 G b.patch
2 A c.patch
% hg qunapplied
% hg qunapplied -v
3 G d.patch
$ hg qselect 2
number of unguarded, unapplied patches has changed from 0 to 1
$ qappunappv
% hg qapplied
new.patch
c.patch
% hg qapplied -v
0 A new.patch
1 U b.patch
2 A c.patch
% hg qunapplied
d.patch
% hg qunapplied -v
3 U d.patch
$ for patch in `hg qseries`; do
> echo % hg qapplied $patch
> hg qapplied $patch
> echo % hg qunapplied $patch
> hg qunapplied $patch
> done
% hg qapplied new.patch
new.patch
% hg qunapplied new.patch
b.patch
d.patch
% hg qapplied b.patch
new.patch
% hg qunapplied b.patch
d.patch
% hg qapplied c.patch
new.patch
c.patch
% hg qunapplied c.patch
d.patch
% hg qapplied d.patch
new.patch
c.patch
% hg qunapplied d.patch
hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past
$ hg qdelete -k b.patch
$ hg qseries -m
b.patch
hg qseries -m with color
$ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
\x1b[0;31;1mb.patch\x1b[0m (esc)
excercise corner cases in "qselect --reapply"
$ hg qpop -a
popping c.patch
popping new.patch
patch queue now empty
$ hg qguard -- new.patch -not-new
$ hg qguard -- c.patch -not-c
$ hg qguard -- d.patch -not-d
$ hg qpush -a
applying new.patch
applying c.patch
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qguard -l
new.patch: -not-new
c.patch: -not-c
d.patch: -not-d
$ hg qselect --reapply not-d
popping guarded patches
popping d.patch
now at: c.patch
reapplying unguarded patches
cannot push 'd.patch' - guarded by '-not-d'
$ hg qser -v
0 A new.patch
1 A c.patch
2 G d.patch
$ hg qselect --reapply -n
guards deactivated
$ hg qpush
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 A new.patch
1 A c.patch
2 A d.patch
$ hg qselect --reapply not-c
popping guarded patches
popping d.patch
popping c.patch
now at: new.patch
reapplying unguarded patches
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 A new.patch
1 G c.patch
2 A d.patch
$ hg qselect --reapply not-new
popping guarded patches
popping d.patch
popping new.patch
patch queue now empty
reapplying unguarded patches
applying c.patch
applying d.patch
patch d.patch is empty
now at: d.patch
$ hg qser -v
0 G new.patch
1 A c.patch
2 A d.patch
test that qselect shows "number of guarded, applied patches" correctly
$ hg qimport -q -e b.patch
adding b.patch to series file
$ hg qguard -- b.patch -not-b
$ hg qpop -a -q
patch queue now empty
$ hg qunapplied -v
0 G new.patch
1 U c.patch
2 U d.patch
3 U b.patch
$ hg qselect not-new not-c
number of unguarded, unapplied patches has changed from 3 to 2
$ hg qpush -q -a
patch d.patch is empty
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 A d.patch
3 A b.patch
$ hg qselect --none
guards deactivated
$ hg qselect not-new not-c not-d
number of guarded, applied patches has changed from 0 to 1
test that "qselect --reapply" reapplies patches successfully when the
already applied patch becomes unguarded and it follows the already
guarded (= not yet applied) one.
$ hg qpop -q -a
patch queue now empty
$ hg qselect not-new not-c
number of unguarded, unapplied patches has changed from 1 to 2
$ hg qpush -q -a
patch d.patch is empty
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 A d.patch
3 A b.patch
$ hg qselect -q --reapply not-c not-b
now at: d.patch
cannot push 'b.patch' - guarded by '-not-b'
$ hg qseries -v
0 U new.patch
1 G c.patch
2 A d.patch
3 G b.patch
test that "qselect --reapply" checks applied patches correctly when no
applied patches becomes guarded but some of unapplied ones become
unguarded.
$ hg qpop -q -a
patch queue now empty
$ hg qselect not-new not-c not-d
number of unguarded, unapplied patches has changed from 2 to 1
$ hg qpush -q -a
now at: b.patch
$ hg qapplied -v
0 G new.patch
1 G c.patch
2 G d.patch
3 A b.patch
$ hg qselect -q --reapply not-new not-c
$ hg qseries -v
0 G new.patch
1 G c.patch
2 U d.patch
3 A b.patch