Mercurial > hg
view contrib/zsh_completion @ 39506:b66ea3fc3a86
sparse-revlog: set max delta chain length to on thousand
The new snapshot system used in the sparse-revlog case gave us some small size
benefit so far. However its most important property is to gracefully handle
harder limit on delta chainlength.
Long delta chain has a very detrimental impact on read (and write) performance
in revlog. Being able to shorter them provide a great boost. However, shorting
delta used to result significantly lower compression ratio. The intermediate
snapshots effectively suppress most of this effect (even all in some case).
# Effect on the test repository
The repository we use for test is not "realistic" but can still show this in
action using an unreasonably low chain limit. Limiting the chain length show a
sizeable increase but stay under control: +6% for limit=15; +15% for limit=10.
Without the snapshot system the increase is significantly bigger: +45% for
limit=15; +80% for limit=10. Even slightly larger than without delta chain
limit, the resulting size is still smaller than before we started doing
snapshots.
Here is a table for comparison. *Since the repository is not branchy, the
initial sparse-revlog version does not bring much benefit compare to the
non-sparse one):
chain length limit | none | limit=15 | limit=10 |
without sparse-revlog | 62 818 987 | 112 664 615 | 131 222 574 |
without snapshot | 74 365 490 | 108 211 410 | 133 857 764 |
with snapshot | 59 230 936 | 63 002 924 | 68 415 329 |
# Effect On Real Life Repositories
The series provides significant benefits on all kind of repositories.
Using `hg debugupgraderepo -o redeltaparent --run`, we recomputed delta chain
for various repositories with different settings:
- delta chain length: unlimited or 1000 limit
- sparse-revlog: enabled or disabled
- this series: applied or not applied
We can observe multiple types of effect:
- On very branchy repositories:
* The delta chain limit as low impact on the repo size.
* Intermediate snapshot greatly reduces manifest size:
- pypy: -80%
- netbeans: -95%
* The delta chain limit is effective, without a size impact:
- netbeans average: 613 -> 282
- private #1 average: 1 068 -> 307
- On more linear repository:
* Intermediate snapshot limit the impact of delta chain limit:
- mozilla:
without the series: +360%
with the series: +25%
* The delta chain limit provides large improvement:
- mozilla's average chain length:
unlimited: 15 338
limited: 469
* Despite the chain length limit, the manifest size is reduced:
- mercurial: -25%
- mozilla: -30%
It is clear that the use of chains of intermediate snapshots provide large
benefits both in storage size and delta chains quality. We should now switch our
effort toward making sure the write performance are acceptable. Then,
`sparse-revlog` will be a suitable format for all new repository.
# Raw Statistic
* no-sparse: general delta repository not using sparse-revlog
* no-snapshot: sparse-revlog repository not using this series
* snapshot: sparse-revlog repository using this series
mercurial
Manifest Size:
limit | none | 1000
------------|-------------|------------
no-sparse | 8 021 373 | 8 199 366
no-snapshot | 8 103 561 | 8 259 719
snapshot | 6 137 116 | 6 126 433
Manifest Chain length data
limit || none || 1000 ||
value || average | max || average | max ||
------------||---------|---------||---------|---------||
no-sparse || 307 | 1456 || 279 | 1000 ||
no-snapshot || 312 | 1456 || 283 | 1000 ||
snapshot || 248 | 1208 || 241 | 1000 ||
Full Store Size
limit | none | 1000
------------|-------------|------------
no-sparse | 51 013 198 | 51 201 574
no-snapshot | 50 930 795 | 51 141 006
snapshot | 48 072 037 | 48 093 572
pypy
Manifest Size:
limit | none | 1000
------------|-------------|------------
no-sparse | 193 987 784 | 193 987 784
no-snapshot | 163 171 745 | 163 312 229
snapshot | 34 605 900 | 34 600 750
Manifest Chain length data
limit || none || 1000 ||
value || average | max || average | max ||
------------||---------|---------||---------|---------||
no-sparse || 101 | 692 || 101 | 692 ||
no-snapshot || 151 | 1307 || 148 | 1000 ||
snapshot || 128 | 1309 || 125 | 1000 ||
Full Store Size
limit | none | 1000
------------|-------------|------------
no-sparse | 495 931 473 | 495 931 473
no-snapshot | 465 441 017 | 465 581 501
snapshot | 355 467 301 | 355 472 451
Mozilla
Manifest Size:
limit | none | 1000
------------|----------------|---------------
no-sparse | 416 757 148 | 1 869 009 668
no-snapshot | 401 592 370 | 1 843 493 795
snapshot | 224 359 521 | 284 615 500
Manifest Chain length data
limit || none || 1000 ||
value || average | max || average | max ||
------------||---------|---------||---------|---------||
no-sparse || 15 333 | 58 980 || 468 | 1 000 ||
no-snapshot || 15 336 | 58 980 || 469 | 1 000 ||
snapshot || 15 338 | 58 983 || 469 | 1 000 ||
Full Store Size
limit | none | 1000
------------|----------------|---------------
no-sparse | 2 712 477 887 | 4 164 995 451
no-snapshot | 2 698 887 835 | 4 141 054 304
snapshot | 2 518 130 385 | 2 578 587 596
Netbeans
Manifest Size:
limit | none | 1000
------------|----------------|---------------
no-sparse | 4 766 794 101 | 4 870 642 687
no-snapshot | 4 334 806 082 | 4 428 681 309
snapshot | 232 659 666 | 240 330 665
Manifest Chain length data
limit || none || 1000 ||
value || average | max || average | max ||
------------||---------|---------||---------|---------||
no-sparse || 597 | 6802 || 254 | 1 000 ||
no-snapshot || 648 | 6 802 || 305 | 1 000 ||
snapshot || 613 | 6 804 || 282 | 1 000 ||
Full Store Size
limit | none | 1000
------------|----------------|---------------
no-sparse | 5 807 347 998 | 5 911 196 584
no-snapshot | 5 375 398 602 | 5 469 273 829
snapshot | 1 282 519 928 | 1 290 190 927
Private repo #1
Manifest Size:
limit | none | 1000
------------|-----------------|---------------
no-sparse | 41 389 010 840 | 41 398 162 091
no-snapshot | 9 737 319 435 | 10 223 773 150
snapshot | 744 215 807 | 747 961 822
Manifest Chain length data
limit || none || 1000 ||
value || average | max || average | max ||
------------||---------|---------||---------|---------||
no-sparse || 245 | 8 885 || 81 | 1 000 ||
no-snapshot || 1 225 | 8 885 || 336 | 1 000 ||
snapshot || 1 068 | 7 909 || 307 | 1 000 ||
Full Store Size
limit | none | 1000
------------|----------------|---------------
no-sparse | 49 646 065 126 | 49 655 216 377
no-snapshot | 17 924 862 856 | 18 411 316 571
snapshot | 9 009 024 710 | 9 012 770 725
Private repo #2
We currently have less data available for that repository.
* Before is a sparse-revlog repository without this series
* After is a sparse-revlog repository with this series + 1000 chain limit
Manifest Size:
Before: 1 531 485 040 bytes
After: 1 091 422 451 bytes
Manifest Chain:
Before: 2 218 avg; 6 575 Max
After: 442 avg; 1 000 Max
Full Store Size
Before: 15 203 955 615
after: 8 207 180 693
author | Boris Feld <boris.feld@octobus.net> |
---|---|
date | Fri, 07 Sep 2018 11:18:45 -0400 |
parents | 45d12c49c3f3 |
children | 5f06c21d37de |
line wrap: on
line source
#compdef hg # Zsh completion script for mercurial. Rename this file to _hg and copy # it into your zsh function path (/usr/share/zsh/site-functions for # instance) # # If you do not want to install it globally, you can copy it somewhere # else and add that directory to $fpath. This must be done before # compinit is called. If the file is copied to ~/.zsh.d, your ~/.zshrc # file could look like this: # # fpath=("$HOME/.zsh.d" $fpath) # autoload -U compinit # compinit # # Copyright (C) 2005, 2006 Steve Borho <steve@borho.org> # Copyright (C) 2006-10 Brendan Cully <brendan@kublai.com> # # Permission is hereby granted, without written agreement and without # licence or royalty fees, to use, copy, modify, and distribute this # software and to distribute modified versions of this software for any # purpose, provided that the above copyright notice and the following # two paragraphs appear in all copies of this software. # # In no event shall the authors be liable to any party for direct, # indirect, special, incidental, or consequential damages arising out of # the use of this software and its documentation, even if the authors # have been advised of the possibility of such damage. # # The authors specifically disclaim any warranties, including, but not # limited to, the implied warranties of merchantability and fitness for # a particular purpose. The software provided hereunder is on an "as # is" basis, and the authors have no obligation to provide maintenance, # support, updates, enhancements, or modifications. emulate -LR zsh setopt extendedglob local curcontext="$curcontext" state line typeset -A _hg_cmd_globals _hg() { local cmd _hg_root integer i=2 _hg_cmd_globals=() while (( i < $#words )) do case "$words[$i]" in -R|--repository) eval _hg_root="$words[$i+1]" _hg_cmd_globals+=("$words[$i]" "$_hg_root") (( i += 2 )) continue ;; -R*) _hg_cmd_globals+="$words[$i]" eval _hg_root="${words[$i]#-R}" (( i++ )) continue ;; --cwd|--config) # pass along arguments to hg completer _hg_cmd_globals+=("$words[$i]" "$words[$i+1]") (( i += 2 )) continue ;; -*) # skip option (( i++ )) continue ;; esac if [[ -z "$cmd" ]] then cmd="$words[$i]" words[$i]=() (( CURRENT-- )) fi (( i++ )) done if [[ -z "$cmd" ]] then _arguments -s -S : $_hg_global_opts \ ':mercurial command:_hg_commands' return fi # resolve abbreviations and aliases if ! (( $+functions[_hg_cmd_${cmd}] )) then local cmdexp (( $#_hg_cmd_list )) || _hg_get_commands cmdexp=$_hg_cmd_list[(r)${cmd}*] if [[ $cmdexp == $_hg_cmd_list[(R)${cmd}*] ]] then # might be nice to rewrite the command line with the expansion cmd="$cmdexp" fi if [[ -n $_hg_alias_list[$cmd] ]] then cmd=$_hg_alias_list[$cmd] fi fi curcontext="${curcontext%:*:*}:hg-${cmd}:" zstyle -s ":completion:$curcontext:" cache-policy update_policy if [[ -z "$update_policy" ]] then zstyle ":completion:$curcontext:" cache-policy _hg_cache_policy fi if (( $+functions[_hg_cmd_${cmd}] )) then _hg_cmd_${cmd} else # complete unknown commands normally _arguments -s -S : $_hg_global_opts \ '*:files:_hg_files' fi } _hg_cache_policy() { typeset -a old # cache for a minute old=( "$1"(mm+10) ) (( $#old )) && return 0 return 1 } _hg_get_commands() { typeset -ga _hg_cmd_list typeset -gA _hg_alias_list local hline cmd cmdalias _call_program hg HGPLAINEXCEPT=alias hg debugcomplete -v | while read -A hline do cmd=$hline[1] _hg_cmd_list+=($cmd) for cmdalias in $hline[2,-1] do _hg_cmd_list+=($cmdalias) _hg_alias_list+=($cmdalias $cmd) done done } _hg_commands() { (( $#_hg_cmd_list )) || _hg_get_commands _describe -t commands 'mercurial command' _hg_cmd_list } _hg_revrange() { compset -P 1 '*:' _hg_labels "$@" } _hg_labels() { labels=("${(f)$(_hg_cmd debugnamecomplete)}") (( $#labels )) && _describe -t labels 'labels' labels } _hg_bookmarks() { typeset -a bookmark bookmarks _hg_cmd bookmarks | while read -A bookmark do if test -z ${bookmark[-1]:#[0-9]*} then bookmarks+=($bookmark[-2]) fi done (( $#bookmarks )) && _describe -t bookmarks 'bookmarks' bookmarks } _hg_branches() { typeset -a branches local branch _hg_cmd branches | while read branch do branches+=(${branch/ #[0-9]#:*}) done (( $#branches )) && _describe -t branches 'branches' branches } # likely merge candidates _hg_mergerevs() { typeset -a heads branches local revset='sort(head() and not ., -rev)' heads=(${(f)"$(_hg_cmd log -r '$revset' --template '{rev}:{branch}\\n')"}) (( $#heads )) && _describe -t heads 'heads' heads branches=(${(S)heads/#*:/}) (( $#branches )) && _describe -t branches 'branches' branches } _hg_files() { if [[ -n "$_hg_root" ]] then [[ -d "$_hg_root/.hg" ]] || return case "$_hg_root" in /*) _files -W $_hg_root ;; *) _files -W $PWD/$_hg_root ;; esac else _files fi } _hg_status() { [[ -d $PREFIX ]] || PREFIX=$PREFIX:h status_files=(${(ps:\0:)"$(_hg_cmd status -0n$1 ./$PREFIX)"}) } _hg_unknown() { typeset -a status_files _hg_status u _wanted files expl 'unknown files' _multi_parts / status_files } _hg_missing() { typeset -a status_files _hg_status d _wanted files expl 'missing files' _multi_parts / status_files } _hg_committable() { typeset -a status_files _hg_status mar _wanted files expl 'modified, added or removed files' _multi_parts / status_files } _hg_resolve() { local rstate rpath [[ -d $PREFIX ]] || PREFIX=$PREFIX:h _hg_cmd resolve -l ./$PREFIX | while read rstate rpath do [[ $rstate == 'R' ]] && resolved_files+=($rpath) [[ $rstate == 'U' ]] && unresolved_files+=($rpath) done } _hg_resolved() { typeset -a resolved_files unresolved_files _hg_resolve _wanted files expl 'resolved files' _multi_parts / resolved_files } _hg_unresolved() { typeset -a resolved_files unresolved_files _hg_resolve _wanted files expl 'unresolved files' _multi_parts / unresolved_files } _hg_config() { typeset -a items items=(${${(%f)"$(_call_program hg hg showconfig)"}%%\=*}) (( $#items )) && _describe -t config 'config item' items } _hg_internal_merge_tools=( \\:dump \\:fail \\:forcedump \\:local \\:merge \\:merge-local \\:merge-other \\:merge3 \\:other \\:prompt \\:tagmerge \\:union ) _hg_merge_tools() { typeset -a external_tools _describe -t internal_tools 'internal merge tools' _hg_internal_merge_tools external_tools=(${(f)"$(_hg_cmd showconfig merge-tools | cut -d . -f 2)"}) (( $#external_tools )) && _describe -t external_tools 'external merge tools' external_tools } _hg_shelves() { shelves=("${(f)$(_hg_cmd shelve -ql)}") (( $#shelves )) && _describe -t shelves 'shelves' shelves } _hg_addremove() { _alternative 'files:unknown files:_hg_unknown' \ 'files:missing files:_hg_missing' } _hg_ssh_urls() { if [[ -prefix */ ]] then if zstyle -T ":completion:${curcontext}:files" remote-access then local host=${PREFIX%%/*} typeset -a remdirs compset -p $(( $#host + 1 )) local rempath=${(M)PREFIX##*/} local cacheid="hg:${host}-${rempath//\//_}" cacheid=${cacheid%[-_]} compset -P '*/' if _cache_invalid "$cacheid" || ! _retrieve_cache "$cacheid" then remdirs=(${${(M)${(f)"$(_call_program files ssh -a -x $host ls -1FL "${(q)rempath}")"}##*/}%/}) _store_cache "$cacheid" remdirs fi _describe -t directories 'remote directory' remdirs -S/ else _message 'remote directory' fi else if compset -P '*@' then _hosts -S/ else _alternative 'hosts:remote host name:_hosts -S/' \ 'users:user:_users -S@' fi fi } _hg_urls() { if compset -P bundle:// then _files elif compset -P ssh:// then _hg_ssh_urls elif [[ -prefix *: ]] then _urls else local expl compset -S '[^:]*' _wanted url-schemas expl 'URL schema' compadd -S '' - \ http:// https:// ssh:// bundle:// fi } _hg_paths() { typeset -a paths pnames _hg_cmd paths | while read -A pnames do paths+=($pnames[1]) done (( $#paths )) && _describe -t path-aliases 'repository alias' paths } _hg_remote() { _alternative 'path-aliases:repository alias:_hg_paths' \ 'directories:directory:_files -/' \ 'urls:URL:_hg_urls' } _hg_clone_dest() { _alternative 'directories:directory:_files -/' \ 'urls:URL:_hg_urls' } _hg_add_help_topics=( config dates diffs environment extensions filesets glossary hgignore hgweb merge-tools multirevs obsolescence patterns phases revisions revsets subrepos templating urls ) _hg_help_topics() { local topics (( $#_hg_cmd_list )) || _hg_get_commands topics=($_hg_cmd_list $_hg_add_help_topics) _describe -t help_topics 'help topics' topics } # Common options _hg_global_opts=( '(--repository -R)'{-R+,--repository=}'[repository root directory or name of overlay bundle file]:repository:_files -/' '--cwd=[change working directory]:new working directory:_files -/' '(--noninteractive -y)'{-y,--noninteractive}'[do not prompt, automatically pick the first choice for all prompts]' '(--verbose -v)'{-v,--verbose}'[enable additional output]' '*--config[set/override config option]:defined config items:_hg_config' '(--quiet -q)'{-q,--quiet}'[suppress output]' '(--help -h)'{-h,--help}'[display help and exit]' '--debug[enable debugging output]' '--debugger[start debugger]' '--encoding=[set the charset encoding]:encoding' '--encodingmode=[set the charset encoding mode]:encoding mode' '--traceback[always print a traceback on exception]' '--time[time how long the command takes]' '--profile[print command execution profile]' '--version[output version information and exit]' '--hidden[consider hidden changesets]' '--color=[when to colorize]:when:(true false yes no always auto never debug)' '--pager=[when to paginate (default: auto)]:when:(true false yes no always auto never)' ) _hg_pat_opts=( '*'{-I+,--include=}'[include names matching the given patterns]:dir:_files -W $(_hg_cmd root) -/' '*'{-X+,--exclude=}'[exclude names matching the given patterns]:dir:_files -W $(_hg_cmd root) -/') _hg_clone_opts=( $_hg_remote_opts '(--noupdate -U)'{-U,--noupdate}'[do not update the new working directory]' '--pull[use pull protocol to copy metadata]' '--uncompressed[use uncompressed transfer (fast over LAN)]') _hg_date_user_opts=( '(--currentdate -D)'{-D,--currentdate}'[record the current date as commit date]' '(--currentuser -U)'{-U,--currentuser}'[record the current user as committer]' '(--date -d)'{-d+,--date=}'[record the specified date as commit date]:date' '(--user -u)'{-u+,--user=}'[record the specified user as committer]:user') _hg_gitlike_opts=( '(--git -g)'{-g,--git}'[use git extended diff format]') _hg_diff_opts=( $_hg_gitlike_opts '(--text -a)'{-a,--text}'[treat all files as text]' '--nodates[omit dates from diff headers]') _hg_mergetool_opts=( '(--tool -t)'{-t+,--tool=}'[specify merge tool]:merge tool:_hg_merge_tools' ) _hg_dryrun_opts=( '(--dry-run -n)'{-n,--dry-run}'[do not perform actions, just print output]') _hg_ignore_space_opts=( '(--ignore-all-space -w)'{-w,--ignore-all-space}'[ignore white space when comparing lines]' '(--ignore-space-change -b)'{-b,--ignore-space-change}'[ignore changes in the amount of white space]' '(--ignore-blank-lines -B)'{-B,--ignore-blank-lines}'[ignore changes whose lines are all blank]' '(--ignore-space-at-eol -Z)'{-Z,--ignore-space-at-eol}'[ignore changes in whitespace at EOL]' ) _hg_template_opts=( '--template[display with template]:template' ) _hg_log_opts=( $_hg_global_opts $_hg_template_opts $_hg_gitlike_opts '(--limit -l)'{-l+,--limit=}'[limit number of changes displayed]:limit' '(--no-merges -M)'{-M,--no-merges}'[do not show merges]' '(--patch -p)'{-p,--patch}'[show patch]' '--stat[output diffstat-style summary of changes]' '(--graph -G)'{-G,--graph}'[show the revision DAG]' ) _hg_commit_opts=( '(-m --message -l --logfile --edit -e)'{-e,--edit}'[edit commit message]' '(-e --edit -l --logfile --message -m)'{-m+,--message=}'[use <text> as commit message]:message' '(-e --edit -m --message --logfile -l)'{-l+,--logfile=}'[read the commit message from <file>]:log file:_files') _hg_remote_opts=( '(--ssh -e)'{-e+,--ssh=}'[specify ssh command to use]:command' '--remotecmd=[specify hg command to run on the remote side]:remote command' '--insecure[do not verify server certificate (ignoring web.cacerts config)]' ) _hg_branch_bmark_opts=( '(--bookmark -B)'{-B+,--bookmark=}'[specify bookmark(s)]:bookmark:_hg_bookmarks' '(--branch -b)'{-b+,--branch=}'[specify branch(es)]:branch:_hg_branches' ) _hg_subrepos_opts=( '(--subrepos -S)'{-S,--subrepos}'[recurse into subrepositories]') _hg_cmd() { _call_program hg HGPLAIN=1 hg "$_hg_cmd_globals[@]" "$@" 2> /dev/null } _hg_cmd_add() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts $_hg_subrepos_opts \ '*:unknown files:_hg_unknown' } _hg_cmd_addremove() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts $_hg_subrepos_opts \ '(--similarity -s)'{-s+,--similarity=}'[guess renamed files by similarity (0<=s<=100)]:similarity' \ '*:unknown or missing files:_hg_addremove' } _hg_cmd_annotate() { _arguments -s -S : $_hg_global_opts $_hg_ignore_space_opts $_hg_pat_opts \ '(--rev -r)'{-r+,--rev=}'[annotate the specified revision]:revision:_hg_labels' \ "--no-follow[don't follow copies and renames]" \ '(--text -a)'{-a,--text}'[treat all files as text]' \ '(--user -u)'{-u,--user}'[list the author (long with -v)]' \ '(--file -f)'{-f,--file}'[list the filename]' \ '(--date -d)'{-d,--date}'[list the date (short with -q)]' \ '(--number -n)'{-n,--number}'[list the revision number (default)]' \ '(--changeset -c)'{-c,--changeset}'[list the changeset]' \ '(--line-number -l)'{-l,--line-number}'[show line number at the first appearance]' \ '*:files:_hg_files' } _hg_cmd_archive() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_subrepos_opts \ '--no-decode[do not pass files through decoders]' \ '(--prefix -p)'{-p+,--prefix=}'[directory prefix for files in archive]:prefix' \ '(--rev -r)'{-r+,--rev=}'[revision to distribute]:revision:_hg_labels' \ '(--type -t)'{-t+,--type=}'[type of distribution to create]:archive type:(files tar tbz2 tgz uzip zip)' \ '*:destination:_files' } _hg_cmd_backout() { _arguments -s -S : $_hg_global_opts $_hg_mergetool_opts $_hg_pat_opts \ '--merge[merge with old dirstate parent after backout]' \ '(--date -d)'{-d+,--date=}'[record the specified date as commit date]:date' \ '--parent[parent to choose when backing out merge]' \ '(--user -u)'{-u+,--user=}'[record the specified user as committer]:user' \ '(--rev -r 1)'{-r+,--rev=}'[revision to backout]:revision:_hg_labels' \ '(--message -m)'{-m+,--message=}'[use <text> as commit message]:text' \ '(--logfile -l)'{-l+,--logfile=}'[read commit message from <file>]:log file:_files' \ ':revision:_hg_labels' } _hg_cmd_bisect() { _arguments -s -S : $_hg_global_opts \ '(-)'{-r,--reset}'[reset bisect state]' \ '(--extend -e)'{-e,--extend}'[extend the bisect range]' \ '(--good -g --bad -b --skip -s --reset -r)'{-g,--good}'[mark changeset good]'::revision:_hg_labels \ '(--good -g --bad -b --skip -s --reset -r)'{-b,--bad}'[mark changeset bad]'::revision:_hg_labels \ '(--good -g --bad -b --skip -s --reset -r)'{-s,--skip}'[skip testing changeset]' \ '(--command -c --noupdate -U)'{-c+,--command=}'[use command to check changeset state]':commands:_command_names \ '(--command -c --noupdate -U)'{-U,--noupdate}'[do not update to target]' } _hg_cmd_bookmarks() { _arguments -s -S : $_hg_global_opts \ '(--force -f)'{-f,--force}'[force]' \ '(--inactive -i)'{-i,--inactive}'[mark a bookmark inactive]' \ '(--rev -r --delete -d --rename -m)'{-r+,--rev=}'[revision]:revision:_hg_labels' \ '(--rev -r --delete -d --rename -m)'{-d,--delete}'[delete a given bookmark]' \ '(--rev -r --delete -d --rename -m)'{-m+,--rename=}'[rename a given bookmark]:bookmark:_hg_bookmarks' \ ':bookmark:_hg_bookmarks' } _hg_cmd_branch() { _arguments -s -S : $_hg_global_opts \ '(--force -f)'{-f,--force}'[set branch name even if it shadows an existing branch]' \ '(--clean -C)'{-C,--clean}'[reset branch name to parent branch name]' } _hg_cmd_branches() { _arguments -s -S : $_hg_global_opts \ '(--closed -c)'{-c,--closed}'[show normal and closed branches]' } _hg_cmd_bundle() { _arguments -s -S : $_hg_global_opts $_hg_remote_opts \ '(--force -f)'{-f,--force}'[run even when the destination is unrelated]' \ '(2)*--base[a base changeset assumed to be available at the destination]:revision:_hg_labels' \ '*'{-b+,--branch=}'[a specific branch you would like to bundle]:branch:_hg_branches' \ '*'{-r+,--rev=}'[a changeset intended to be added to the destination]:revision:_hg_labels' \ '--all[bundle all changesets in the repository]' \ '--type[bundle compression type to use (default: bzip2)]:bundle type' \ ':output file:_files' \ ':destination repository:_files -/' } _hg_cmd_cat() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts \ '(--output -o)'{-o+,--output=}'[print output to file with formatted name]:format string' \ '(--rev -r)'{-r+,--rev=}'[revision]:revision:_hg_labels' \ '--decode[apply any matching decode filter]' \ '*:file:_hg_files' } _hg_cmd_clone() { _arguments -s -S : $_hg_global_opts $_hg_clone_opts \ '*'{-r+,--rev=}'[do not clone everything, but include this changeset and its ancestors]:revision' \ '(--updaterev -u)'{-u+,--updaterev=}'[revision, tag or branch to check out]:revision' \ '*'{-b+,--branch=}"[do not clone everything, but include this branch's changesets and their ancestors]:branch" \ ':source repository:_hg_remote' \ ':destination:_hg_clone_dest' } _hg_cmd_commit() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_subrepos_opts \ '(--addremove -A)'{-A,--addremove}'[mark new/missing files as added/removed before committing]' \ '(--message -m)'{-m+,--message=}'[use <text> as commit message]:text' \ '(--logfile -l)'{-l+,--logfile=}'[read commit message from <file>]:log file:_files' \ '(--date -d)'{-d+,--date=}'[record the specified date as commit date]:date' \ '(--user -u)'{-u+,--user=}'[record the specified user as committer]:user' \ '--amend[amend the parent of the working directory]' \ '--close-branch[mark a branch head as closed]' \ '(--interactive -i)'{-i,--interactive}'[use interactive mode]' \ '(--secret -s)'{-s,--secret}'[use the secret phase for committing]' \ '*:file:_hg_committable' } _hg_cmd_copy() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts \ '(--after -A)'{-A,--after}'[record a copy that has already occurred]' \ '(--force -f)'{-f,--force}'[forcibly copy over an existing managed file]' \ '*:file:_hg_files' } _hg_cmd_diff() { local context state state_descr line ret=1 typeset -A opt_args _arguments -s -S : $_hg_global_opts $_hg_diff_opts $_hg_ignore_space_opts \ $_hg_pat_opts $_hg_subrepos_opts \ '*'{-r+,--rev=}'[revision]:revision:_hg_revrange' \ '--noprefix[omit a/ and b/ prefixes from filenames]' \ '(--show-function -p)'{-p,--show-function}'[show which function each change is in]' \ '(--change -c)'{-c+,--change=}'[change made by revision]:revision:_hg_labels' \ '(--text -a)'{-a,--text}'[treat all files as text]' \ '--reverse[produce a diff that undoes the changes]' \ '(--unified -U)'{-U+,--unified=}'[number of lines of context to show]:count' \ '--stat[output diffstat-style summary of changes]' \ '--root=[produce diffs relative to subdirectory]:directory:_files -/' \ '*:file:->diff_files' && ret=0 if [[ $state == 'diff_files' ]] then if [[ -n ${opt_args[(I)-r|--rev]} ]] then _hg_files && ret=0 else _hg_committable && ret=0 fi fi return ret } _hg_cmd_export() { _arguments -s -S : $_hg_global_opts $_hg_diff_opts \ '(--output -o)'{-o+,--output=}'[print output to file with formatted name]:format string' \ '--switch-parent[diff against the second parent]' \ '*'{-r+,--rev=}'[revisions to export]:revision:_hg_labels' \ '*:revision:_hg_labels' } _hg_cmd_files() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_subrepos_opts \ '(--rev -r)'{-r+,--rev=}'[search the repository as it is in REV]:revision:_hg_labels' \ '(--print0 -0)'{-0,--print0}'[end filenames with NUL, for use with xargs]' \ '*:file:_hg_files' } _hg_cmd_forget() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts \ '(--interactive -i)'{-i,--interactive}'[use interactive mode]' \ '*:file:_hg_files' } _hg_cmd_graft() { _arguments -s -S : $_hg_global_opts $_hg_dryrun_opts \ $_hg_date_user_opts $_hg_mergetool_opts \ '*'{-r+,--rev=}'[revisions to graft]:revision:_hg_labels' \ '(--continue -c --abort -a)'{-c,--continue}'[resume interrupted graft]' \ '(--continue -c --abort -a)'{-a,--abort}'[abort interrupted graft]' \ '(--edit -e)'{-e,--edit}'[invoke editor on commit messages]' \ '--log[append graft info to log message]' \ '*:revision:_hg_labels' } _hg_cmd_grep() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts \ '(--print0 -0)'{-0,--print0}'[end filenames with NUL]' \ '--all[print all revisions with matches]' \ '(--follow -f)'{-f,--follow}'[follow changeset or file history]' \ '(--ignore-case -i)'{-i,--ignore-case}'[ignore case when matching]' \ '(--files-with-matches -l)'{-l,--files-with-matches}'[print only filenames and revs that match]' \ '(--line-number -n)'{-n,--line-number}'[print matching line numbers]' \ '*'{-r+,--rev=}'[search in given revision range]:revision:_hg_revrange' \ '(--user -u)'{-u,--user}'[print user who committed change]' \ '(--date -d)'{-d,--date}'[print date of a changeset]' \ '1:search pattern:' \ '*:files:_hg_files' } _hg_cmd_heads() { _arguments -s -S : $_hg_global_opts $_hg_template_opts \ '(--topo -t)'{-t,--topo}'[show topological heads only]' \ '(--closed -c)'{-c,--closed}'[show normal and closed branch heads]' \ '(--rev -r)'{-r+,--rev=}'[show only heads which are descendants of rev]:revision:_hg_labels' } _hg_cmd_help() { _arguments -s -S : $_hg_global_opts \ '(--extension -e)'{-e,--extension}'[show only help for extensions]' \ '(--command -c)'{-c,--command}'[show only help for commands]' \ '(--keyword -k)'{-k,--keyword}'[show topics matching keyword]' \ '*:mercurial help topic:_hg_help_topics' } _hg_cmd_identify() { _arguments -s -S : $_hg_global_opts $_hg_remote_opts \ '(--rev -r)'{-r+,--rev=}'[identify the specified rev]:revision:_hg_labels' \ '(--num -n)'{-n,--num}'[show local revision number]' \ '(--id -i)'{-i,--id}'[show global revision id]' \ '(--branch -b)'{-b,--branch}'[show branch]' \ '(--bookmarks -B)'{-B,--bookmarks}'[show bookmarks]' \ '(--tags -t)'{-t,--tags}'[show tags]' } _hg_cmd_import() { _arguments -s -S : $_hg_global_opts $_hg_commit_opts \ '(--strip -p)'{-p+,--strip=}'[directory strip option for patch (default: 1)]:count' \ '(--force -f)'{-f,--force}'[skip check for outstanding uncommitted changes]' \ '--bypass[apply patch without touching the working directory]' \ '--no-commit[do not commit, just update the working directory]' \ '--partial[commit even if some hunks fail]' \ '--exact[abort if patch would apply lossily]' \ '--import-branch[use any branch information in patch (implied by --exact)]' \ '(--date -d)'{-d+,--date=}'[record the specified date as commit date]:date' \ '(--user -u)'{-u+,--user=}'[record the specified user as committer]:user' \ '(--similarity -s)'{-s+,--similarity=}'[guess renamed files by similarity (0<=s<=100)]:similarity' \ '*:patch:_files' } _hg_cmd_incoming() { _arguments -s -S : $_hg_log_opts $_hg_branch_bmark_opts $_hg_remote_opts \ $_hg_subrepos_opts \ '(--force -f)'{-f,--force}'[run even when the remote repository is unrelated]' \ '*'{-r+,--rev=}'[a remote changeset intended to be added]:revision:_hg_labels' \ '(--newest-first -n)'{-n,--newest-first}'[show newest record first]' \ '--bundle[file to store the bundles into]:bundle file:_files' \ ':source:_hg_remote' } _hg_cmd_init() { _arguments -s -S : $_hg_global_opts $_hg_remote_opts \ ':dir:_files -/' } _hg_cmd_locate() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts \ '(--rev -r)'{-r+,--rev=}'[search repository as it stood at revision]:revision:_hg_labels' \ '(--print0 -0)'{-0,--print0}'[end filenames with NUL, for use with xargs]' \ '(--fullpath -f)'{-f,--fullpath}'[print complete paths from the filesystem root]' \ '*:search pattern:_hg_files' } _hg_cmd_log() { _arguments -s -S : $_hg_log_opts $_hg_pat_opts \ '(--follow --follow-first -f)'{-f,--follow}'[follow changeset or history]' \ '(-f --follow)--follow-first[only follow the first parent of merge changesets]' \ '(--copies -C)'{-C,--copies}'[show copied files]' \ '*'{-k+,--keyword=}'[search for a keyword]:keyword' \ '*'{-r+,--rev=}'[show the specified revision or revset]:revision:_hg_revrange' \ '(--only-merges -m)'{-m,--only-merges}'[show only merges]' \ '*'{-P+,--prune=}'[do not display revision or any of its ancestors]:revision:_hg_labels' \ '*'{-b+,--branch=}'[show changesets within the given named branch]:branch:_hg_branches' \ '*'{-u+,--user=}'[revisions committed by user]:user' \ '(--date -d)'{-d+,--date=}'[show revisions matching date spec]:date' \ '*:files:_hg_files' } _hg_cmd_manifest() { _arguments -s -S : $_hg_global_opts \ '--all[list files from all revisions]' \ '(--rev -r)'{-r+,--rev=}'[revision to display]:revision:_hg_labels' \ ':revision:_hg_labels' } _hg_cmd_merge() { _arguments -s -S : $_hg_global_opts $_hg_mergetool_opts \ '(--force -f)'{-f,--force}'[force a merge with outstanding changes]' \ '(--rev -r 1)'{-r+,--rev=}'[revision to merge]:revision:_hg_mergerevs' \ '(--preview -P)'{-P,--preview}'[review revisions to merge (no merge is performed)]' \ ':revision:_hg_mergerevs' } _hg_cmd_outgoing() { _arguments -s -S : $_hg_log_opts $_hg_branch_bmark_opts $_hg_remote_opts \ $_hg_subrepos_opts \ '(--force -f)'{-f,--force}'[run even when the destination is unrelated]' \ '*'{-r+,--rev=}'[a changeset intended to be included in the destination]:revision:_hg_revrange' \ '(--newest-first -n)'{-n,--newest-first}'[show newest record first]' \ ':destination:_hg_remote' } _hg_cmd_parents() { _arguments -s -S : $_hg_global_opts $_hg_template_opts \ '(--rev -r)'{-r+,--rev=}'[show parents of the specified rev]:revision:_hg_labels' \ ':last modified file:_hg_files' } _hg_cmd_paths() { _arguments -s -S : $_hg_global_opts \ ':path:_hg_paths' } _hg_cmd_phase() { _arguments -s -S : $_hg_global_opts \ '(--public -p --draft -d --secret -s)'{-p,--public}'[set changeset phase to public]' \ '(--public -p --draft -d --secret -s)'{-d,--draft}'[set changeset phase to draft]' \ '(--public -p --draft -d --secret -s)'{-s,--secret}'[set changeset phase to secret]' \ '(--force -f)'{-f,--force}'[allow to move boundary backward]' \ '*'{-r+,--rev=}'[target revision]:revision:_hg_labels' \ '*:revision:_hg_labels' } _hg_cmd_pull() { _arguments -s -S : $_hg_global_opts $_hg_branch_bmark_opts $_hg_remote_opts \ '(--force -f)'{-f,--force}'[run even when the remote repository is unrelated]' \ '(--update -u)'{-u,--update}'[update to new branch head if new descendants were pulled]' \ '*'{-r+,--rev=}'[a remote changeset intended to be added]:revision:_hg_labels' \ ':source:_hg_remote' } _hg_cmd_push() { _arguments -s -S : $_hg_global_opts $_hg_branch_bmark_opts $_hg_remote_opts \ '(--force -f)'{-f,--force}'[force push]' \ '*'{-r+,--rev=}'[a changeset intended to be included in the destination]:revision:_hg_labels' \ '--new-branch[allow pushing a new branch]' \ ':destination:_hg_remote' } _hg_cmd_remove() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts $_hg_subrepos_opts \ '(--after -A)'{-A,--after}'[record delete for missing files]' \ '(--force -f)'{-f,--force}'[forget added files, delete modified files]' \ '*:file:_hg_files' } _hg_cmd_rename() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts \ '(--after -A)'{-A,--after}'[record a rename that has already occurred]' \ '(--force -f)'{-f,--force}'[forcibly copy over an existing managed file]' \ '*:file:_hg_files' } _hg_cmd_resolve() { local context state state_descr line ret=1 typeset -A opt_args _arguments -s -S : $_hg_global_opts $_hg_mergetool_opts $_hg_pat_opts \ '(--all -a)'{-a,--all}'[select all unresolved files]' \ '(--no-status -n)'{-n,--no-status}'[hide status prefix]' \ '(--list -l --mark -m --unmark -u)'{-l,--list}'[list state of files needing merge]:*:merged files:->resolve_files' \ '(--mark -m --list -l --unmark -u)'{-m,--mark}'[mark files as resolved]:*:unresolved files:_hg_unresolved' \ '(--unmark -u --list -l --mark -m)'{-u,--unmark}'[mark files as unresolved]:*:resolved files:_hg_resolved' \ '*:file:_hg_unresolved' && ret=0 if [[ $state == 'resolve_files' ]] then _alternative 'files:resolved files:_hg_resolved' \ 'files:unresolved files:_hg_unresolved' && ret=0 fi return ret } _hg_cmd_revert() { local context state state_descr line ret=1 typeset -A opt_args _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_dryrun_opts \ '(--all -a :)'{-a,--all}'[revert all changes when no arguments given]' \ '(--rev -r)'{-r+,--rev=}'[revision to revert to]:revision:_hg_labels' \ '(--no-backup -C)'{-C,--no-backup}'[do not save backup copies of files]' \ '(--date -d)'{-d+,--date=}'[tipmost revision matching date]:date' \ '(--interactive -i)'{-i,--interactive}'[interactively select the changes]' \ '*:file:->revert_files' && ret=0 if [[ $state == 'revert_files' ]] then if [[ -n ${opt_args[(I)-r|--rev]} ]] then _hg_files && ret=0 else typeset -a status_files _hg_status mard _wanted files expl 'modified, added, removed or deleted file' _multi_parts / status_files && ret=0 fi fi return ret } _hg_cmd_rollback() { _arguments -s -S : $_hg_global_opts $_hg_dryrun_opts \ '(--force -f)'{-f,--force}'[ignore safety measures]' \ } _hg_cmd_serve() { _arguments -s -S : $_hg_global_opts $_hg_subrepos_opts \ '(--accesslog -A)'{-A+,--accesslog=}'[name of access log file to write to]:log file:_files' \ '(--errorlog -E)'{-E+,--errorlog=}'[name of error log file to write to]:log file:_files' \ '(--daemon -d)'{-d,--daemon}'[run server in background]' \ '(--port -p)'{-p+,--port=}'[port to listen on (default: 8000)]:listen port' \ '(--address -a)'{-a+,--address=}'[address to listen on (default: all interfaces)]:interface address' \ '--prefix=[prefix path to serve from (default: server root)]:directory:_files' \ '(--name -n)'{-n+,--name=}'[name to show in web pages (default: working directory)]:repository name' \ '--web-conf=[name of the hgweb config file]:config file:_files' \ '--pid-file=[name of file to write process ID to]:pid file:_files' \ '--cmdserver[for remote clients]' \ '(--templates -t)'{-t+,--templates=}'[web template directory]:template dir:_files -/' \ '--style=[template style to use]:style' \ '--stdio[for remote clients]' \ '(--ipv6 -6)'{-6,--ipv6}'[use IPv6 in addition to IPv4]' \ '--certificate=[SSL certificate file]:certificate file:_files' \ '--print-url[start and print only the URL]' } _hg_cmd_showconfig() { _arguments -s -S : $_hg_global_opts \ '(--untrusted -u)'{-u,--untrusted}'[show untrusted configuration options]' \ '(--edit -e)'{-e,--edit}'[edit user config]' \ '(--local -l --global -g)'{-l,--local}'[edit repository config]' \ '(--local -l --global -g)'{-g,--global}'[edit global config]' \ '*:config item:_hg_config' } _hg_cmd_status() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_subrepos_opts \ '(--all -A)'{-A,--all}'[show status of all files]' \ '(--modified -m)'{-m,--modified}'[show only modified files]' \ '(--added -a)'{-a,--added}'[show only added files]' \ '(--removed -r)'{-r,--removed}'[show only removed files]' \ '(--deleted -d)'{-d,--deleted}'[show only deleted (but tracked) files]' \ '(--clean -c)'{-c,--clean}'[show only files without changes]' \ '(--unknown -u)'{-u,--unknown}'[show only unknown (not tracked) files]' \ '(--ignored -i)'{-i,--ignored}'[show ignored files]' \ '(--no-status -n)'{-n,--no-status}'[hide status prefix]' \ '(--copies -C)'{-C,--copies}'[show source of copied files]' \ '(--print0 -0)'{-0,--print0}'[end filenames with NUL, for use with xargs]' \ '*--rev=[show difference from revision]:revision:_hg_labels' \ '--change=[list the changed files of a revision]:revision:_hg_labels' \ '*:files:_files' } _hg_cmd_summary() { _arguments -s -S : $_hg_global_opts \ '--remote[check for push and pull]' } _hg_cmd_tag() { _arguments -s -S : $_hg_global_opts \ '(--local -l)'{-l,--local}'[make the tag local]' \ '(--message -m)'{-m+,--message=}'[message for tag commit log entry]:message' \ '(--date -d)'{-d+,--date=}'[record the specified date as commit date]:date' \ '(--user -u)'{-u+,--user=}'[record the specified user as committer]:user' \ '(--rev -r)'{-r+,--rev=}'[revision to tag]:revision:_hg_labels' \ '(--force -f)'{-f,--force}'[force tag]' \ '--remove[remove a tag]' \ '(--edit -e)'{-e,--edit}'[edit commit message]' \ ':tag name:' } _hg_cmd_tip() { _arguments -s -S : $_hg_global_opts $_hg_gitlike_opts $_hg_template_opts \ '(--patch -p)'{-p,--patch}'[show patch]' } _hg_cmd_unbundle() { _arguments -s -S : $_hg_global_opts \ '(--update -u)'{-u,--update}'[update to new tip if changesets were unbundled]' \ '*:files:_files' } _hg_cmd_update() { _arguments -s -S : $_hg_global_opts $_hg_mergetool_opts \ '(--clean -C)'{-C,--clean}'[discard uncommitted changes (no backup)]' \ '(--check -c)'{-c,--check}'[require clean working directory]' \ '(--merge -m)'{-m,--merge}'[merge uncommitted changes]' \ '(--date -d)'{-d+,--date=}'[tipmost revision matching date]:date' \ '(--rev -r 1)'{-r+,--rev=}'[revision]:revision:_hg_labels' \ ':revision:_hg_labels' } ## extensions ## # HGK _hg_cmd_view() { _arguments -s -S : $_hg_global_opts \ '(--limit -l)'{-l+,--limit=}'[limit number of changes displayed]:limit' \ ':revision range:_hg_labels' } # MQ _hg_qseries() { typeset -a patches patches=(${(f)"$(_hg_cmd qseries)"}) (( $#patches )) && _describe -t hg-patches 'patches' patches } _hg_qapplied() { typeset -a patches patches=(${(f)"$(_hg_cmd qapplied)"}) if (( $#patches )) then patches+=(qbase qtip) _describe -t hg-applied-patches 'applied patches' patches fi } _hg_qunapplied() { typeset -a patches patches=(${(f)"$(_hg_cmd qunapplied)"}) (( $#patches )) && _describe -t hg-unapplied-patches 'unapplied patches' patches } # unapplied, including guarded patches _hg_qdeletable() { typeset -a unapplied unapplied=(${(f)"$(_hg_cmd qseries)"}) for p in $(_hg_cmd qapplied) do unapplied=(${unapplied:#$p}) done (( $#unapplied )) && _describe -t hg-allunapplied-patches 'all unapplied patches' unapplied } _hg_qguards() { typeset -a guards local guard compset -P "+|-" _hg_cmd qselect -s | while read guard do guards+=(${guard#(+|-)}) done (( $#guards )) && _describe -t hg-guards 'guards' guards } _hg_qseries_opts=( '(--summary -s)'{-s,--summary}'[print first line of patch header]') _hg_cmd_qapplied() { _arguments -s -S : $_hg_global_opts $_hg_qseries_opts \ '(--last -1)'{-1,--last}'[show only the preceding applied patch]' \ '*:patch:_hg_qapplied' } _hg_cmd_qclone() { _arguments -s -S : $_hg_global_opts $_hg_remote_opts $_hg_clone_opts \ '(--patches -p)'{-p+,--patches=}'[location of source patch repository]:' \ ':source repository:_hg_remote' \ ':destination:_hg_clone_dest' } _hg_cmd_qdelete() { _arguments -s -S : $_hg_global_opts \ '(--keep -k)'{-k,--keep}'[keep patch file]' \ '*'{-r+,--rev=}'[stop managing a revision]:applied patch:_hg_revrange' \ '*:unapplied patch:_hg_qdeletable' } _hg_cmd_qdiff() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_diff_opts \ $_hg_ignore_space_opts \ '*:pattern:_hg_files' } _hg_cmd_qfinish() { _arguments -s -S : $_hg_global_opts \ '(--applied -a)'{-a,--applied}'[finish all applied patches]' \ '*:patch:_hg_qapplied' } _hg_cmd_qfold() { _arguments -s -S : $_hg_global_opts $_hg_commit_opts \ '(--keep -k)'{-k,--keep}'[keep folded patch files]' \ '(--force -f)'{-f,--force}'[overwrite any local changes]' \ '--no-backup[do not save backup copies of files]' \ '*:unapplied patch:_hg_qunapplied' } _hg_cmd_qgoto() { _arguments -s -S : $_hg_global_opts \ '(--force -f)'{-f,--force}'[overwrite any local changes]' \ '--keep-changes[tolerate non-conflicting local changes]' \ ':patch:_hg_qseries' } _hg_cmd_qguard() { _arguments -s -S : $_hg_global_opts \ '(--list -l)'{-l,--list}'[list all patches and guards]' \ '(--none -n)'{-n,--none}'[drop all guards]' \ ':patch:_hg_qseries' \ '*:guards:_hg_qguards' } _hg_cmd_qheader() { _arguments -s -S : $_hg_global_opts \ ':patch:_hg_qseries' } _hg_cmd_qimport() { _arguments -s -S : $_hg_global_opts $_hg_gitlike_opts \ '(--existing -e)'{-e,--existing}'[import file in patch dir]' \ '(--name -n 2)'{-n+,--name}'[patch file name]:name' \ '(--force -f)'{-f,--force}'[overwrite existing files]' \ '*'{-r+,--rev=}'[place existing revisions under mq control]:revision:_hg_revrange' \ '(--push -P)'{-P,--push}'[qpush after importing]' \ '*:patch:_files' } _hg_cmd_qnew() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_commit_opts $_hg_date_user_opts $_hg_gitlike_opts \ ':patch:' } _hg_cmd_qnext() { _arguments -s -S : $_hg_global_opts $_hg_qseries_opts } _hg_cmd_qpop() { _arguments -s -S : $_hg_global_opts \ '(--all -a :)'{-a,--all}'[pop all patches]' \ '(--force -f)'{-f,--force}'[forget any local changes]' \ '--keep-changes[tolerate non-conflicting local changes]' \ '--no-backup[do not save backup copies of files]' \ ':patch:_hg_qapplied' } _hg_cmd_qprev() { _arguments -s -S : $_hg_global_opts $_hg_qseries_opts } _hg_cmd_qpush() { _arguments -s -S : $_hg_global_opts \ '(--all -a :)'{-a,--all}'[apply all patches]' \ '(--list -l)'{-l,--list}'[list patch name in commit text]' \ '(--force -f)'{-f,--force}'[apply if the patch has rejects]' \ '(--exact -e)'{-e,--exact}'[apply the target patch to its recorded parent]' \ '--move[reorder patch series and apply only the patch]' \ '--keep-changes[tolerate non-conflicting local changes]' \ '--no-backup[do not save backup copies of files]' \ ':patch:_hg_qunapplied' } _hg_cmd_qrefresh() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts $_hg_commit_opts $_hg_date_user_opts $_hg_gitlike_opts \ '(--short -s)'{-s,--short}'[short refresh]' \ '*:files:_hg_files' } _hg_cmd_qrename() { _arguments -s -S : $_hg_global_opts \ ':patch:_hg_qunapplied' \ ':destination:' } _hg_cmd_qselect() { _arguments -s -S : $_hg_global_opts \ '(--none -n :)'{-n,--none}'[disable all guards]' \ '(--series -s :)'{-s,--series}'[list all guards in series file]' \ '--pop[pop to before first guarded applied patch]' \ '--reapply[pop and reapply patches]' \ '*:guards:_hg_qguards' } _hg_cmd_qseries() { _arguments -s -S : $_hg_global_opts $_hg_qseries_opts \ '(--missing -m)'{-m,--missing}'[print patches not in series]' } _hg_cmd_qunapplied() { _arguments -s -S : $_hg_global_opts $_hg_qseries_opts \ '(--first -1)'{-1,--first}'[show only the first patch]' } _hg_cmd_qtop() { _arguments -s -S : $_hg_global_opts $_hg_qseries_opts } _hg_cmd_strip() { _arguments -s -S : $_hg_global_opts \ '(--force -f)'{-f,--force}'[force removal of changesets, discard uncommitted changes (no backup)]' \ '--no-backup[no backups]' \ '(--keep -k)'{-k,--keep}'[do not modify working directory during strip]' \ '*'{-B+,--bookmark=}'[remove revs only reachable from given bookmark]:bookmark:_hg_bookmarks' \ '*'{-r+,--rev=}'[revision]:revision:_hg_labels' \ '*:revision:_hg_labels' } # Patchbomb _hg_cmd_email() { _arguments -s -S : $_hg_global_opts $_hg_remote_opts $_hg_gitlike_opts \ '--plain[omit hg patch header]' \ '--body[send patches as inline message text (default)]' \ '(--outgoing -o)'{-o,--outgoing}'[send changes not found in the target repository]' \ '(--bundle -b)'{-b,--bundle}'[send changes not in target as a binary bundle]' \ '--bundlename[name of the bundle attachment file (default: bundle)]:' \ '*'{-r+,--rev=}'[search in given revision range]:revision:_hg_revrange' \ '--force[run even when remote repository is unrelated (with -b/--bundle)]' \ '*--base=[a base changeset to specify instead of a destination (with -b/--bundle)]:revision:_hg_labels' \ '--intro[send an introduction email for a single patch]' \ '(--inline -i --attach -a)'{-a,--attach}'[send patches as attachments]' \ '(--attach -a --inline -i)'{-i,--inline}'[send patches as inline attachments]' \ '*--bcc=[email addresses of blind carbon copy recipients]:email' \ '*'{-c+,--cc=}'[email addresses of copy recipients]:email' \ '(--diffstat -d)'{-d,--diffstat}'[add diffstat output to messages]' \ '--date=[use the given date as the sending date]:date' \ '--desc=[use the given file as the series description]:files:_files' \ '(--from -f)'{-f+,--from=}'[email address of sender]:email' \ '(--test -n)'{-n,--test}'[print messages that would be sent]' \ '(--mbox -m)'{-m+,--mbox=}'[write messages to mbox file instead of sending them]:file:_files' \ '*--reply-to=[email addresses replies should be sent to]:email' \ '(--subject -s)'{-s+,--subject=}'[subject of first message (intro or single patch)]:subject' \ '--in-reply-to=[message identifier to reply to]:msgid' \ '*--flag=[flags to add in subject prefixes]:flag' \ '*'{-t+,--to=}'[email addresses of recipients]:email' \ ':revision:_hg_revrange' } # Rebase _hg_cmd_rebase() { _arguments -s -S : $_hg_global_opts $_hg_commit_opts $_hg_mergetool_opts $_hg_dryrun_opts \ '*'{-r+,--rev=}'[rebase these revisions]:revision:_hg_revrange' \ '(--source -s --base -b)'{-s+,--source=}'[rebase the specified changeset and descendants]:revision:_hg_labels' \ '(--source -s --base -b)'{-b+,--base=}'[rebase everything from branching point of specified changeset]:revision:_hg_labels' \ '(--dest -d)'{-d+,--dest=}'[rebase onto the specified changeset]:revision:_hg_labels' \ '--collapse[collapse the rebased changesets]' \ '(--keep -k)'{-k,--keep}'[keep original changesets]' \ '--keepbranches[keep original branch names]' \ '(--continue -c --abort -a)'{-c,--continue}'[continue an interrupted rebase]' \ '(--continue -c --abort -a)'{-a,--abort}'[abort an interrupted rebase]' \ } # Record _hg_cmd_record() { _arguments -s -S : $_hg_global_opts $_hg_commit_opts $_hg_pat_opts \ $_hg_ignore_space_opts $_hg_subrepos_opts \ '(--addremove -A)'{-A,--addremove}'[mark new/missing files as added/removed before committing]' \ '--close-branch[mark a branch as closed, hiding it from the branch list]' \ '--amend[amend the parent of the working dir]' \ '(--date -d)'{-d+,--date=}'[record the specified date as commit date]:date' \ '(--user -u)'{-u+,--user=}'[record the specified user as committer]:user' } _hg_cmd_qrecord() { _arguments -s -S : $_hg_global_opts $_hg_commit_opts $_hg_date_user_opts $_hg_gitlike_opts \ $_hg_pat_opts $_hg_ignore_space_opts $_hg_subrepos_opts } # Convert _hg_cmd_convert() { _arguments -s -S : $_hg_global_opts \ '(--source-type -s)'{-s+,--source-type=}'[source repository type]:type:(hg cvs darcs git svn mtn gnuarch bzr p4)' \ '(--dest-type -d)'{-d+,--dest-type=}'[destination repository type]:type:(hg svn)' \ '*'{-r+,--rev=}'[import up to target revision]:revision' \ '(--authormap -A)'{-A+,--authormap=}'[remap usernames using this file]:file:_files' \ '--filemap=[remap file names using contents of file]:file:_files' \ '--full[apply filemap changes by converting all files again]' \ '--splicemap=[splice synthesized history into place]:file:_files' \ '--branchmap=[change branch names while converting]:file:_files' \ '--branchsort[try to sort changesets by branches]' \ '--datesort[try to sort changesets by date]' \ '--sourcesort[preserve source changesets order]' \ '--closesort[try to reorder closed revisions]' } # Purge _hg_cmd_purge() { _arguments -s -S : $_hg_global_opts $_hg_pat_opts \ '(--abort-on-err -a)'{-a,--abort-on-err}'[abort if an error occurs]' \ '--all[purge ignored files too]' \ '(--print -p)'{-p,--print}'[print filenames instead of deleting them]' \ '(--print0 -0)'{-0,--print0}'[end filenames with NUL, for use with xargs (implies -p/--print)]' } # Shelve _hg_cmd_shelve() { local context state state_descr line ret=1 typeset -A opt_args _arguments -s -S : $_hg_global_opts $_hg_pat_opts \ '(--addremove -A)'{-A,--addremove}'[mark new/missing files as added/removed before shelving]' \ '(--unknown -u)'{-u,--unknown}'[store unknown files in the shelve]' \ '(--name -n :)--cleanup[delete all shelved changes]' \ '--date=[shelve with the specified commit date]:date' \ '(--delete -d)'{-d,--delete}'[delete the named shelved change(s)]' \ '(--edit -e)'{-e,--edit}'[invoke editor on commit messages]' \ '(--list -l)'{-l,--list}'[list current shelves]' \ '(--message -m)'{-m+,--message=}'[use text as shelve message]:text' \ '(--name -n)'{-n+,--name=}'[use the given name for the shelved commit]:name' \ '(--patch -p)'{-p,--patch}'[output patches for changes]' \ '(--interactive -i)'{-i,--interactive}'[interactive mode, only works while creating a shelve]' \ '--stat[output diffstat-style summary of changes]' \ '*:file:->shelve_files' && ret=0 if [[ $state == 'shelve_files' ]] then if [[ -n ${opt_args[(I)-d|--delete|-l|--list|-p|--patch|--stat]} ]] then _hg_shelves && ret=0 else typeset -a status_files _hg_status mard _wanted files expl 'modified, added, removed or deleted file' _multi_parts / status_files && ret=0 fi fi return ret } _hg_cmd_unshelve() { _arguments -s -S : $_hg_global_opts $_hg_mergetool_opts \ '(--abort -a --continue -c --name -n :)'{-a,--abort}'[abort an incomplete unshelve operation]' \ '(--abort -a --continue -c --name -n :)'{-c,--continue}'[continue an incomplete unshelve operation]' \ '(--keep -k)'{-k,--keep}'[keep shelve after unshelving]' \ '(--name -n :)'{-n+,--name=}'[restore shelved change with given name]:shelve:_hg_shelves' \ ':shelve:_hg_shelves' } _hg "$@"