view doc/gendoc.py @ 39506:b66ea3fc3a86

sparse-revlog: set max delta chain length to on thousand The new snapshot system used in the sparse-revlog case gave us some small size benefit so far. However its most important property is to gracefully handle harder limit on delta chainlength. Long delta chain has a very detrimental impact on read (and write) performance in revlog. Being able to shorter them provide a great boost. However, shorting delta used to result significantly lower compression ratio. The intermediate snapshots effectively suppress most of this effect (even all in some case). # Effect on the test repository The repository we use for test is not "realistic" but can still show this in action using an unreasonably low chain limit. Limiting the chain length show a sizeable increase but stay under control: +6% for limit=15; +15% for limit=10. Without the snapshot system the increase is significantly bigger: +45% for limit=15; +80% for limit=10. Even slightly larger than without delta chain limit, the resulting size is still smaller than before we started doing snapshots. Here is a table for comparison. *Since the repository is not branchy, the initial sparse-revlog version does not bring much benefit compare to the non-sparse one): chain length limit | none | limit=15 | limit=10 | without sparse-revlog | 62 818 987 | 112 664 615 | 131 222 574 | without snapshot | 74 365 490 | 108 211 410 | 133 857 764 | with snapshot | 59 230 936 | 63 002 924 | 68 415 329 | # Effect On Real Life Repositories The series provides significant benefits on all kind of repositories. Using `hg debugupgraderepo -o redeltaparent --run`, we recomputed delta chain for various repositories with different settings: - delta chain length: unlimited or 1000 limit - sparse-revlog: enabled or disabled - this series: applied or not applied We can observe multiple types of effect: - On very branchy repositories: * The delta chain limit as low impact on the repo size. * Intermediate snapshot greatly reduces manifest size: - pypy: -80% - netbeans: -95% * The delta chain limit is effective, without a size impact: - netbeans average: 613 -> 282 - private #1 average: 1 068 -> 307 - On more linear repository: * Intermediate snapshot limit the impact of delta chain limit: - mozilla: without the series: +360% with the series: +25% * The delta chain limit provides large improvement: - mozilla's average chain length: unlimited: 15 338 limited: 469 * Despite the chain length limit, the manifest size is reduced: - mercurial: -25% - mozilla: -30% It is clear that the use of chains of intermediate snapshots provide large benefits both in storage size and delta chains quality. We should now switch our effort toward making sure the write performance are acceptable. Then, `sparse-revlog` will be a suitable format for all new repository. # Raw Statistic * no-sparse: general delta repository not using sparse-revlog * no-snapshot: sparse-revlog repository not using this series * snapshot: sparse-revlog repository using this series mercurial Manifest Size: limit | none | 1000 ------------|-------------|------------ no-sparse | 8 021 373 | 8 199 366 no-snapshot | 8 103 561 | 8 259 719 snapshot | 6 137 116 | 6 126 433 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 307 | 1456 || 279 | 1000 || no-snapshot || 312 | 1456 || 283 | 1000 || snapshot || 248 | 1208 || 241 | 1000 || Full Store Size limit | none | 1000 ------------|-------------|------------ no-sparse | 51 013 198 | 51 201 574 no-snapshot | 50 930 795 | 51 141 006 snapshot | 48 072 037 | 48 093 572 pypy Manifest Size: limit | none | 1000 ------------|-------------|------------ no-sparse | 193 987 784 | 193 987 784 no-snapshot | 163 171 745 | 163 312 229 snapshot | 34 605 900 | 34 600 750 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 101 | 692 || 101 | 692 || no-snapshot || 151 | 1307 || 148 | 1000 || snapshot || 128 | 1309 || 125 | 1000 || Full Store Size limit | none | 1000 ------------|-------------|------------ no-sparse | 495 931 473 | 495 931 473 no-snapshot | 465 441 017 | 465 581 501 snapshot | 355 467 301 | 355 472 451 Mozilla Manifest Size: limit | none | 1000 ------------|----------------|--------------- no-sparse | 416 757 148 | 1 869 009 668 no-snapshot | 401 592 370 | 1 843 493 795 snapshot | 224 359 521 | 284 615 500 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 15 333 | 58 980 || 468 | 1 000 || no-snapshot || 15 336 | 58 980 || 469 | 1 000 || snapshot || 15 338 | 58 983 || 469 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 2 712 477 887 | 4 164 995 451 no-snapshot | 2 698 887 835 | 4 141 054 304 snapshot | 2 518 130 385 | 2 578 587 596 Netbeans Manifest Size: limit | none | 1000 ------------|----------------|--------------- no-sparse | 4 766 794 101 | 4 870 642 687 no-snapshot | 4 334 806 082 | 4 428 681 309 snapshot | 232 659 666 | 240 330 665 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 597 | 6802 || 254 | 1 000 || no-snapshot || 648 | 6 802 || 305 | 1 000 || snapshot || 613 | 6 804 || 282 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 5 807 347 998 | 5 911 196 584 no-snapshot | 5 375 398 602 | 5 469 273 829 snapshot | 1 282 519 928 | 1 290 190 927 Private repo #1 Manifest Size: limit | none | 1000 ------------|-----------------|--------------- no-sparse | 41 389 010 840 | 41 398 162 091 no-snapshot | 9 737 319 435 | 10 223 773 150 snapshot | 744 215 807 | 747 961 822 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 245 | 8 885 || 81 | 1 000 || no-snapshot || 1 225 | 8 885 || 336 | 1 000 || snapshot || 1 068 | 7 909 || 307 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 49 646 065 126 | 49 655 216 377 no-snapshot | 17 924 862 856 | 18 411 316 571 snapshot | 9 009 024 710 | 9 012 770 725 Private repo #2 We currently have less data available for that repository. * Before is a sparse-revlog repository without this series * After is a sparse-revlog repository with this series + 1000 chain limit Manifest Size: Before: 1 531 485 040 bytes After: 1 091 422 451 bytes Manifest Chain: Before: 2 218 avg; 6 575 Max After: 442 avg; 1 000 Max Full Store Size Before: 15 203 955 615 after: 8 207 180 693
author Boris Feld <boris.feld@octobus.net>
date Fri, 07 Sep 2018 11:18:45 -0400
parents ff874d34c856
children 170926caf44c
line wrap: on
line source

#!/usr/bin/env python
"""usage: %s DOC ...

where DOC is the name of a document
"""

from __future__ import absolute_import

import os
import sys
import textwrap

# This script is executed during installs and may not have C extensions
# available. Relax C module requirements.
os.environ['HGMODULEPOLICY'] = 'allow'
# import from the live mercurial repo
sys.path.insert(0, "..")
from mercurial import demandimport; demandimport.enable()
# Load util so that the locale path is set by i18n.setdatapath() before
# calling _().
from mercurial import util
util.datapath
from mercurial import (
    commands,
    extensions,
    help,
    minirst,
    ui as uimod,
)
from mercurial.i18n import (
    gettext,
    _,
)

table = commands.table
globalopts = commands.globalopts
helptable = help.helptable
loaddoc = help.loaddoc

def get_desc(docstr):
    if not docstr:
        return "", ""
    # sanitize
    docstr = docstr.strip("\n")
    docstr = docstr.rstrip()
    shortdesc = docstr.splitlines()[0].strip()

    i = docstr.find("\n")
    if i != -1:
        desc = docstr[i + 2:]
    else:
        desc = shortdesc

    desc = textwrap.dedent(desc)

    return (shortdesc, desc)

def get_opts(opts):
    for opt in opts:
        if len(opt) == 5:
            shortopt, longopt, default, desc, optlabel = opt
        else:
            shortopt, longopt, default, desc = opt
            optlabel = _("VALUE")
        allopts = []
        if shortopt:
            allopts.append("-%s" % shortopt)
        if longopt:
            allopts.append("--%s" % longopt)
        if isinstance(default, list):
            allopts[-1] += " <%s[+]>" % optlabel
        elif (default is not None) and not isinstance(default, bool):
            allopts[-1] += " <%s>" % optlabel
        if '\n' in desc:
            # only remove line breaks and indentation
            desc = ' '.join(l.lstrip() for l in desc.split('\n'))
        desc += default and _(" (default: %s)") % default or ""
        yield (", ".join(allopts), desc)

def get_cmd(cmd, cmdtable):
    d = {}
    attr = cmdtable[cmd]
    cmds = cmd.lstrip("^").split("|")

    d['cmd'] = cmds[0]
    d['aliases'] = cmd.split("|")[1:]
    d['desc'] = get_desc(gettext(attr[0].__doc__))
    d['opts'] = list(get_opts(attr[1]))

    s = 'hg ' + cmds[0]
    if len(attr) > 2:
        if not attr[2].startswith('hg'):
            s += ' ' + attr[2]
        else:
            s = attr[2]
    d['synopsis'] = s.strip()

    return d

def showdoc(ui):
    # print options
    ui.write(minirst.section(_("Options")))
    multioccur = False
    for optstr, desc in get_opts(globalopts):
        ui.write("%s\n    %s\n\n" % (optstr, desc))
        if optstr.endswith("[+]>"):
            multioccur = True
    if multioccur:
        ui.write(_("\n[+] marked option can be specified multiple times\n"))
        ui.write("\n")

    # print cmds
    ui.write(minirst.section(_("Commands")))
    commandprinter(ui, table, minirst.subsection)

    # print help topics
    # The config help topic is included in the hgrc.5 man page.
    helpprinter(ui, helptable, minirst.section, exclude=['config'])

    ui.write(minirst.section(_("Extensions")))
    ui.write(_("This section contains help for extensions that are "
               "distributed together with Mercurial. Help for other "
               "extensions is available in the help system."))
    ui.write(("\n\n"
             ".. contents::\n"
             "   :class: htmlonly\n"
             "   :local:\n"
             "   :depth: 1\n\n"))

    for extensionname in sorted(allextensionnames()):
        mod = extensions.load(ui, extensionname, None)
        ui.write(minirst.subsection(extensionname))
        ui.write("%s\n\n" % gettext(mod.__doc__))
        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            ui.write(minirst.subsubsection(_('Commands')))
            commandprinter(ui, cmdtable, minirst.subsubsubsection)

def showtopic(ui, topic):
    extrahelptable = [
        (["common"], '', loaddoc('common')),
        (["hg.1"], '', loaddoc('hg.1')),
        (["hg-ssh.8"], '', loaddoc('hg-ssh.8')),
        (["hgignore.5"], '', loaddoc('hgignore.5')),
        (["hgrc.5"], '', loaddoc('hgrc.5')),
        (["hgignore.5.gendoc"], '', loaddoc('hgignore')),
        (["hgrc.5.gendoc"], '', loaddoc('config')),
    ]
    helpprinter(ui, helptable + extrahelptable, None, include=[topic])

def helpprinter(ui, helptable, sectionfunc, include=[], exclude=[]):
    for names, sec, doc in helptable:
        if exclude and names[0] in exclude:
            continue
        if include and names[0] not in include:
            continue
        for name in names:
            ui.write(".. _%s:\n" % name)
        ui.write("\n")
        if sectionfunc:
            ui.write(sectionfunc(sec))
        if callable(doc):
            doc = doc(ui)
        ui.write(doc)
        ui.write("\n")

def commandprinter(ui, cmdtable, sectionfunc):
    h = {}
    for c, attr in cmdtable.items():
        f = c.split("|")[0]
        f = f.lstrip("^")
        h[f] = c
    cmds = h.keys()
    cmds.sort()

    for f in cmds:
        if f.startswith("debug"):
            continue
        d = get_cmd(h[f], cmdtable)
        ui.write(sectionfunc(d['cmd']))
        # short description
        ui.write(d['desc'][0])
        # synopsis
        ui.write("::\n\n")
        synopsislines = d['synopsis'].splitlines()
        for line in synopsislines:
            # some commands (such as rebase) have a multi-line
            # synopsis
            ui.write("   %s\n" % line)
        ui.write('\n')
        # description
        ui.write("%s\n\n" % d['desc'][1])
        # options
        opt_output = list(d['opts'])
        if opt_output:
            opts_len = max([len(line[0]) for line in opt_output])
            ui.write(_("Options:\n\n"))
            multioccur = False
            for optstr, desc in opt_output:
                if desc:
                    s = "%-*s  %s" % (opts_len, optstr, desc)
                else:
                    s = optstr
                ui.write("%s\n" % s)
                if optstr.endswith("[+]>"):
                    multioccur = True
            if multioccur:
                ui.write(_("\n[+] marked option can be specified"
                           " multiple times\n"))
            ui.write("\n")
        # aliases
        if d['aliases']:
            ui.write(_("    aliases: %s\n\n") % " ".join(d['aliases']))


def allextensionnames():
    return extensions.enabled().keys() + extensions.disabled().keys()

if __name__ == "__main__":
    doc = 'hg.1.gendoc'
    if len(sys.argv) > 1:
        doc = sys.argv[1]

    ui = uimod.ui.load()
    if doc == 'hg.1.gendoc':
        showdoc(ui)
    else:
        showtopic(ui, sys.argv[1])