view hgext/win32mbcs.py @ 39506:b66ea3fc3a86

sparse-revlog: set max delta chain length to on thousand The new snapshot system used in the sparse-revlog case gave us some small size benefit so far. However its most important property is to gracefully handle harder limit on delta chainlength. Long delta chain has a very detrimental impact on read (and write) performance in revlog. Being able to shorter them provide a great boost. However, shorting delta used to result significantly lower compression ratio. The intermediate snapshots effectively suppress most of this effect (even all in some case). # Effect on the test repository The repository we use for test is not "realistic" but can still show this in action using an unreasonably low chain limit. Limiting the chain length show a sizeable increase but stay under control: +6% for limit=15; +15% for limit=10. Without the snapshot system the increase is significantly bigger: +45% for limit=15; +80% for limit=10. Even slightly larger than without delta chain limit, the resulting size is still smaller than before we started doing snapshots. Here is a table for comparison. *Since the repository is not branchy, the initial sparse-revlog version does not bring much benefit compare to the non-sparse one): chain length limit | none | limit=15 | limit=10 | without sparse-revlog | 62 818 987 | 112 664 615 | 131 222 574 | without snapshot | 74 365 490 | 108 211 410 | 133 857 764 | with snapshot | 59 230 936 | 63 002 924 | 68 415 329 | # Effect On Real Life Repositories The series provides significant benefits on all kind of repositories. Using `hg debugupgraderepo -o redeltaparent --run`, we recomputed delta chain for various repositories with different settings: - delta chain length: unlimited or 1000 limit - sparse-revlog: enabled or disabled - this series: applied or not applied We can observe multiple types of effect: - On very branchy repositories: * The delta chain limit as low impact on the repo size. * Intermediate snapshot greatly reduces manifest size: - pypy: -80% - netbeans: -95% * The delta chain limit is effective, without a size impact: - netbeans average: 613 -> 282 - private #1 average: 1 068 -> 307 - On more linear repository: * Intermediate snapshot limit the impact of delta chain limit: - mozilla: without the series: +360% with the series: +25% * The delta chain limit provides large improvement: - mozilla's average chain length: unlimited: 15 338 limited: 469 * Despite the chain length limit, the manifest size is reduced: - mercurial: -25% - mozilla: -30% It is clear that the use of chains of intermediate snapshots provide large benefits both in storage size and delta chains quality. We should now switch our effort toward making sure the write performance are acceptable. Then, `sparse-revlog` will be a suitable format for all new repository. # Raw Statistic * no-sparse: general delta repository not using sparse-revlog * no-snapshot: sparse-revlog repository not using this series * snapshot: sparse-revlog repository using this series mercurial Manifest Size: limit | none | 1000 ------------|-------------|------------ no-sparse | 8 021 373 | 8 199 366 no-snapshot | 8 103 561 | 8 259 719 snapshot | 6 137 116 | 6 126 433 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 307 | 1456 || 279 | 1000 || no-snapshot || 312 | 1456 || 283 | 1000 || snapshot || 248 | 1208 || 241 | 1000 || Full Store Size limit | none | 1000 ------------|-------------|------------ no-sparse | 51 013 198 | 51 201 574 no-snapshot | 50 930 795 | 51 141 006 snapshot | 48 072 037 | 48 093 572 pypy Manifest Size: limit | none | 1000 ------------|-------------|------------ no-sparse | 193 987 784 | 193 987 784 no-snapshot | 163 171 745 | 163 312 229 snapshot | 34 605 900 | 34 600 750 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 101 | 692 || 101 | 692 || no-snapshot || 151 | 1307 || 148 | 1000 || snapshot || 128 | 1309 || 125 | 1000 || Full Store Size limit | none | 1000 ------------|-------------|------------ no-sparse | 495 931 473 | 495 931 473 no-snapshot | 465 441 017 | 465 581 501 snapshot | 355 467 301 | 355 472 451 Mozilla Manifest Size: limit | none | 1000 ------------|----------------|--------------- no-sparse | 416 757 148 | 1 869 009 668 no-snapshot | 401 592 370 | 1 843 493 795 snapshot | 224 359 521 | 284 615 500 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 15 333 | 58 980 || 468 | 1 000 || no-snapshot || 15 336 | 58 980 || 469 | 1 000 || snapshot || 15 338 | 58 983 || 469 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 2 712 477 887 | 4 164 995 451 no-snapshot | 2 698 887 835 | 4 141 054 304 snapshot | 2 518 130 385 | 2 578 587 596 Netbeans Manifest Size: limit | none | 1000 ------------|----------------|--------------- no-sparse | 4 766 794 101 | 4 870 642 687 no-snapshot | 4 334 806 082 | 4 428 681 309 snapshot | 232 659 666 | 240 330 665 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 597 | 6802 || 254 | 1 000 || no-snapshot || 648 | 6 802 || 305 | 1 000 || snapshot || 613 | 6 804 || 282 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 5 807 347 998 | 5 911 196 584 no-snapshot | 5 375 398 602 | 5 469 273 829 snapshot | 1 282 519 928 | 1 290 190 927 Private repo #1 Manifest Size: limit | none | 1000 ------------|-----------------|--------------- no-sparse | 41 389 010 840 | 41 398 162 091 no-snapshot | 9 737 319 435 | 10 223 773 150 snapshot | 744 215 807 | 747 961 822 Manifest Chain length data limit || none || 1000 || value || average | max || average | max || ------------||---------|---------||---------|---------|| no-sparse || 245 | 8 885 || 81 | 1 000 || no-snapshot || 1 225 | 8 885 || 336 | 1 000 || snapshot || 1 068 | 7 909 || 307 | 1 000 || Full Store Size limit | none | 1000 ------------|----------------|--------------- no-sparse | 49 646 065 126 | 49 655 216 377 no-snapshot | 17 924 862 856 | 18 411 316 571 snapshot | 9 009 024 710 | 9 012 770 725 Private repo #2 We currently have less data available for that repository. * Before is a sparse-revlog repository without this series * After is a sparse-revlog repository with this series + 1000 chain limit Manifest Size: Before: 1 531 485 040 bytes After: 1 091 422 451 bytes Manifest Chain: Before: 2 218 avg; 6 575 Max After: 442 avg; 1 000 Max Full Store Size Before: 15 203 955 615 after: 8 207 180 693
author Boris Feld <boris.feld@octobus.net>
date Fri, 07 Sep 2018 11:18:45 -0400
parents 79dd61a4554f
children 2372284d9457
line wrap: on
line source

# win32mbcs.py -- MBCS filename support for Mercurial
#
# Copyright (c) 2008 Shun-ichi Goto <shunichi.goto@gmail.com>
#
# Version: 0.3
# Author:  Shun-ichi Goto <shunichi.goto@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
#

'''allow the use of MBCS paths with problematic encodings

Some MBCS encodings are not good for some path operations (i.e.
splitting path, case conversion, etc.) with its encoded bytes. We call
such a encoding (i.e. shift_jis and big5) as "problematic encoding".
This extension can be used to fix the issue with those encodings by
wrapping some functions to convert to Unicode string before path
operation.

This extension is useful for:

- Japanese Windows users using shift_jis encoding.
- Chinese Windows users using big5 encoding.
- All users who use a repository with one of problematic encodings on
  case-insensitive file system.

This extension is not needed for:

- Any user who use only ASCII chars in path.
- Any user who do not use any of problematic encodings.

Note that there are some limitations on using this extension:

- You should use single encoding in one repository.
- If the repository path ends with 0x5c, .hg/hgrc cannot be read.
- win32mbcs is not compatible with fixutf8 extension.

By default, win32mbcs uses encoding.encoding decided by Mercurial.
You can specify the encoding by config option::

 [win32mbcs]
 encoding = sjis

It is useful for the users who want to commit with UTF-8 log message.
'''
from __future__ import absolute_import

import os
import sys

from mercurial.i18n import _
from mercurial import (
    encoding,
    error,
    pycompat,
    registrar,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

configtable = {}
configitem = registrar.configitem(configtable)

# Encoding.encoding may be updated by --encoding option.
# Use a lambda do delay the resolution.
configitem('win32mbcs', 'encoding',
    default=lambda: encoding.encoding,
)

_encoding = None                                # see extsetup

def decode(arg):
    if isinstance(arg, str):
        uarg = arg.decode(_encoding)
        if arg == uarg.encode(_encoding):
            return uarg
        raise UnicodeError("Not local encoding")
    elif isinstance(arg, tuple):
        return tuple(map(decode, arg))
    elif isinstance(arg, list):
        return map(decode, arg)
    elif isinstance(arg, dict):
        for k, v in arg.items():
            arg[k] = decode(v)
    return arg

def encode(arg):
    if isinstance(arg, pycompat.unicode):
        return arg.encode(_encoding)
    elif isinstance(arg, tuple):
        return tuple(map(encode, arg))
    elif isinstance(arg, list):
        return map(encode, arg)
    elif isinstance(arg, dict):
        for k, v in arg.items():
            arg[k] = encode(v)
    return arg

def appendsep(s):
    # ensure the path ends with os.sep, appending it if necessary.
    try:
        us = decode(s)
    except UnicodeError:
        us = s
    if us and us[-1] not in ':/\\':
        s += pycompat.ossep
    return s


def basewrapper(func, argtype, enc, dec, args, kwds):
    # check check already converted, then call original
    for arg in args:
        if isinstance(arg, argtype):
            return func(*args, **kwds)

    try:
        # convert string arguments, call func, then convert back the
        # return value.
        return enc(func(*dec(args), **dec(kwds)))
    except UnicodeError:
        raise error.Abort(_("[win32mbcs] filename conversion failed with"
                         " %s encoding\n") % (_encoding))

def wrapper(func, args, kwds):
    return basewrapper(func, pycompat.unicode, encode, decode, args, kwds)


def reversewrapper(func, args, kwds):
    return basewrapper(func, str, decode, encode, args, kwds)

def wrapperforlistdir(func, args, kwds):
    # Ensure 'path' argument ends with os.sep to avoids
    # misinterpreting last 0x5c of MBCS 2nd byte as path separator.
    if args:
        args = list(args)
        args[0] = appendsep(args[0])
    if 'path' in kwds:
        kwds['path'] = appendsep(kwds['path'])
    return func(*args, **kwds)

def wrapname(name, wrapper):
    module, name = name.rsplit('.', 1)
    module = sys.modules[module]
    func = getattr(module, name)
    def f(*args, **kwds):
        return wrapper(func, args, kwds)
    f.__name__ = func.__name__
    setattr(module, name, f)

# List of functions to be wrapped.
# NOTE: os.path.dirname() and os.path.basename() are safe because
#       they use result of os.path.split()
funcs = '''os.path.join os.path.split os.path.splitext
 os.path.normpath os.makedirs mercurial.util.endswithsep
 mercurial.util.splitpath mercurial.util.fscasesensitive
 mercurial.util.fspath mercurial.util.pconvert mercurial.util.normpath
 mercurial.util.checkwinfilename mercurial.util.checkosfilename
 mercurial.util.split'''

# These functions are required to be called with local encoded string
# because they expects argument is local encoded string and cause
# problem with unicode string.
rfuncs = '''mercurial.encoding.upper mercurial.encoding.lower
 mercurial.util._filenamebytestr'''

# List of Windows specific functions to be wrapped.
winfuncs = '''os.path.splitunc'''

# codec and alias names of sjis and big5 to be faked.
problematic_encodings = '''big5 big5-tw csbig5 big5hkscs big5-hkscs
 hkscs cp932 932 ms932 mskanji ms-kanji shift_jis csshiftjis shiftjis
 sjis s_jis shift_jis_2004 shiftjis2004 sjis_2004 sjis2004
 shift_jisx0213 shiftjisx0213 sjisx0213 s_jisx0213 950 cp950 ms950 '''

def extsetup(ui):
    # TODO: decide use of config section for this extension
    if ((not os.path.supports_unicode_filenames) and
        (pycompat.sysplatform != 'cygwin')):
        ui.warn(_("[win32mbcs] cannot activate on this platform.\n"))
        return
    # determine encoding for filename
    global _encoding
    _encoding = ui.config('win32mbcs', 'encoding')
    # fake is only for relevant environment.
    if _encoding.lower() in problematic_encodings.split():
        for f in funcs.split():
            wrapname(f, wrapper)
        if pycompat.iswindows:
            for f in winfuncs.split():
                wrapname(f, wrapper)
        wrapname("mercurial.util.listdir", wrapperforlistdir)
        wrapname("mercurial.windows.listdir", wrapperforlistdir)
        # wrap functions to be called with local byte string arguments
        for f in rfuncs.split():
            wrapname(f, reversewrapper)
        # Check sys.args manually instead of using ui.debug() because
        # command line options is not yet applied when
        # extensions.loadall() is called.
        if '--debug' in sys.argv:
            ui.write(("[win32mbcs] activated with encoding: %s\n")
                     % _encoding)