view tests/test-exchange-obsmarkers-case-A6.t @ 51580:b70628a9aa7e

phases: use revision number in new_heads

All graph operations will be done using revision numbers, so passing nodes only
means they will eventually get converted to revision numbers internally.

As part of an effort to align the code on using revision number we make the
`phases.newheads` function operated on revision number, taking them as input
and using them in returns, instead of the node-id it used to consume and
produce.

This is part of multiple changesets effort to translate more part of the logic,
but is done step by step to facilitate the identification of issue that might
arise in mercurial core and extensions.

To make the change simpler to handle for third party extensions, we also rename
the function, using a more modern form. This will help detecting the different
between the node-id version and the rev-num version.

I also take this as an opportunity to add some comment about possible
performance improvement for the future. They don't matter too much now, but they
are worse exploring in a while.

============================================
Testing obsolescence markers push: Cases A.6
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
TestCase 6: new markers between changesets already known on both side
Variants:
# a: explicit push
# b: bare push

A.6  new markers between changesets already known on both side
==============================================================

.. {{{
..   A ◕⇠● B
..     |/
..     ● O
.. }}}
..
.. Marker exist from:
..
..  * `A◕⇠● B`
..
.. Command runs:
..
..  * hg push -r B
..  * hg push
..
.. Expected exchange:
..
..  * `A◕⇠● B`

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.6
  creating test repo for test case A.6
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ hg update -q 0
  $ mkcommit A1
  created new head

make both changeset known in remote

  $ hg push -qf ../pushdest
  $ hg push -qf ../pulldest

create a marker after this

  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  1 new obsolescence markers
  obsoleted 1 changesets
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

  $ cp -R A.6 A.6.a
  $ cp -R A.6 A.6.b

Actual Test (explicit push version)
-----------------------------------

  $ dotest A.6.a A1
  ## Running testcase A.6.a
  # testing echange of "A1" (e5ea8f9c7314)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "A1" from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "e5ea8f9c7314" from main into pulldest
  pulling from main
  no changes found
  1 new obsolescence markers
  obsoleted 1 changesets
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}

Actual Test (bare push version)
-------------------------------

  $ dotest A.6.b
  ## Running testcase A.6.b
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing from main to pushdest
  pushing to pushdest
  searching for changes
  no changes found
  remote: 1 new obsolescence markers
  remote: obsoleted 1 changesets
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling from main into pulldest
  pulling from main
  searching for changes
  no changes found
  1 new obsolescence markers
  obsoleted 1 changesets
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}