Mercurial > hg

# branchmap.py - logic to computes, maintain and stores branchmap for local repo
#
# Copyright 2005-2007 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import struct

from .node import (
    bin,
    hex,
    nullid,
    nullrev,
)
from . import (
    encoding,
    error,
    pycompat,
    scmutil,
    util,
)
from .utils import (
    repoviewutil,
    stringutil,
)

subsettable = repoviewutil. subsettable

calcsize = struct.calcsize
pack_into = struct.pack_into
unpack_from = struct.unpack_from


class BranchMapCache(object):
    """mapping of filtered views of repo with their branchcache"""
    def __init__(self):
        self._per_filter = {}

    def __getitem__(self, repo):
        self.updatecache(repo)
        return self._per_filter[repo.filtername]

    def updatecache(self, repo):
        """Update the cache for the given filtered view on a repository"""
        # This can trigger updates for the caches for subsets of the filtered
        # view, e.g. when there is no cache for this filtered view or the cache
        # is stale.

        cl = repo.changelog
        filtername = repo.filtername
        bcache = self._per_filter.get(filtername)
        if bcache is None or not bcache.validfor(repo):
            # cache object missing or cache object stale? Read from disk
            bcache = branchcache.fromfile(repo)

        revs = []
        if bcache is None:
            # no (fresh) cache available anymore, perhaps we can re-use
            # the cache for a subset, then extend that to add info on missing
            # revisions.
            subsetname = subsettable.get(filtername)
            if subsetname is not None:
                subset = repo.filtered(subsetname)
                bcache = self[subset].copy()
                extrarevs = subset.changelog.filteredrevs - cl.filteredrevs
                revs.extend(r for r in extrarevs if r <= bcache.tiprev)
            else:
                # nothing to fall back on, start empty.
                bcache = branchcache()

        revs.extend(cl.revs(start=bcache.tiprev + 1))
        if revs:
            bcache.update(repo, revs)

        assert bcache.validfor(repo), filtername
        self._per_filter[repo.filtername] = bcache

    def replace(self, repo, remotebranchmap):
        """Replace the branchmap cache for a repo with a branch mapping.

        This is likely only called during clone with a branch map from a
        remote.

        """
        cl = repo.changelog
        clrev = cl.rev
        clbranchinfo = cl.branchinfo
        rbheads = []
        closed = []
        for bheads in remotebranchmap.itervalues():
            rbheads += bheads
            for h in bheads:
                r = clrev(h)
                b, c = clbranchinfo(r)
                if c:
                    closed.append(h)

        if rbheads:
            rtiprev = max((int(clrev(node)) for node in rbheads))
            cache = branchcache(
                remotebranchmap, repo[rtiprev].node(), rtiprev,
                closednodes=closed)

            # Try to stick it as low as possible
            # filter above served are unlikely to be fetch from a clone
            for candidate in ('base', 'immutable', 'served'):
                rview = repo.filtered(candidate)
                if cache.validfor(rview):
                    self._per_filter[candidate] = cache
                    cache.write(rview)
                    return

    def clear(self):
        self._per_filter.clear()

def _unknownnode(node):
    """ raises ValueError when branchcache found a node which does not exists
    """
    raise ValueError(r'node %s does not exist' % pycompat.sysstr(hex(node)))

class branchcache(object):
    """A dict like object that hold branches heads cache.

    This cache is used to avoid costly computations to determine all the
    branch heads of a repo.

    The cache is serialized on disk in the following format:

    <tip hex node> <tip rev number> [optional filtered repo hex hash]
    <branch head hex node> <open/closed state> <branch name>
    <branch head hex node> <open/closed state> <branch name>
    ...

    The first line is used to check if the cache is still valid. If the
    branch cache is for a filtered repo view, an optional third hash is
    included that hashes the hashes of all filtered revisions.

    The open/closed state is represented by a single letter 'o' or 'c'.
    This field can be used to avoid changelog reads when determining if a
    branch head closes a branch or not.
    """

    def __init__(self, entries=(), tipnode=nullid, tiprev=nullrev,
                 filteredhash=None, closednodes=None, hasnode=None):
        """ hasnode is a function which can be used to verify whether changelog
        has a given node or not. If it's not provided, we assume that every node
        we have exists in changelog """
        self.tipnode = tipnode
        self.tiprev = tiprev
        self.filteredhash = filteredhash
        # closednodes is a set of nodes that close their branch. If the branch
        # cache has been updated, it may contain nodes that are no longer
        # heads.
        if closednodes is None:
            self._closednodes = set()
        else:
            self._closednodes = closednodes
        self._entries = dict(entries)
        # whether closed nodes are verified or not
        self._closedverified = False
        # branches for which nodes are verified
        self._verifiedbranches = set()
        self._hasnode = hasnode
        if self._hasnode is None:
            self._hasnode = lambda x: True

    def _verifyclosed(self):
        """ verify the closed nodes we have """
        if self._closedverified:
            return
        for node in self._closednodes:
            if not self._hasnode(node):
                _unknownnode(node)

        self._closedverified = True

    def _verifybranch(self, branch):
        """ verify head nodes for the given branch. """
        if branch not in self._entries or branch in self._verifiedbranches:
            return
        for n in self._entries[branch]:
            if not self._hasnode(n):
                _unknownnode(n)

        self._verifiedbranches.add(branch)

    def _verifyall(self):
        """ verifies nodes of all the branches """
        needverification = set(self._entries.keys()) - self._verifiedbranches
        for b in needverification:
            self._verifybranch(b)

    def __iter__(self):
        return iter(self._entries)

    def __setitem__(self, key, value):
        self._entries[key] = value

    def __getitem__(self, key):
        self._verifybranch(key)
        return self._entries[key]

    def __contains__(self, key):
        self._verifybranch(key)
        return key in self._entries

    def iteritems(self):
        for k, v in self._entries.iteritems():
            self._verifybranch(k)
            yield k, v

    def hasbranch(self, label):
        """ checks whether a branch of this name exists or not """
        self._verifybranch(label)
        return label in self._entries

    @classmethod
    def fromfile(cls, repo):
        f = None
        try:
            f = repo.cachevfs(cls._filename(repo))
            lineiter = iter(f)
            cachekey = next(lineiter).rstrip('\n').split(" ", 2)
            last, lrev = cachekey[:2]
            last, lrev = bin(last), int(lrev)
            filteredhash = None
            hasnode = repo.changelog.hasnode
            if len(cachekey) > 2:
                filteredhash = bin(cachekey[2])
            bcache = cls(tipnode=last, tiprev=lrev, filteredhash=filteredhash,
                         hasnode=hasnode)
            if not bcache.validfor(repo):
                # invalidate the cache
                raise ValueError(r'tip differs')
            bcache.load(repo, lineiter)
        except (IOError, OSError):
            return None

        except Exception as inst:
            if repo.ui.debugflag:
                msg = 'invalid branchheads cache'
                if repo.filtername is not None:
                    msg += ' (%s)' % repo.filtername
                msg += ': %s\n'
                repo.ui.debug(msg % pycompat.bytestr(inst))
            bcache = None

        finally:
            if f:
                f.close()

        return bcache

    def load(self, repo, lineiter):
        """ fully loads the branchcache by reading from the file using the line
        iterator passed"""
        for line in lineiter:
            line = line.rstrip('\n')
            if not line:
                continue
            node, state, label = line.split(" ", 2)
            if state not in 'oc':
                raise ValueError(r'invalid branch state')
            label = encoding.tolocal(label.strip())
            node = bin(node)
            self._entries.setdefault(label, []).append(node)
            if state == 'c':
                self._closednodes.add(node)

    @staticmethod
    def _filename(repo):
        """name of a branchcache file for a given repo or repoview"""
        filename = "branch2"
        if repo.filtername:
            filename = '%s-%s' % (filename, repo.filtername)
        return filename

    def validfor(self, repo):
        """Is the cache content valid regarding a repo

        - False when cached tipnode is unknown or if we detect a strip.
        - True when cache is up to date or a subset of current repo."""
        try:
            return ((self.tipnode == repo.changelog.node(self.tiprev))
                    and (self.filteredhash ==
                         scmutil.filteredhash(repo, self.tiprev)))
        except IndexError:
            return False

    def _branchtip(self, heads):
        '''Return tuple with last open head in heads and false,
        otherwise return last closed head and true.'''
        tip = heads[-1]
        closed = True
        for h in reversed(heads):
            if h not in self._closednodes:
                tip = h
                closed = False
                break
        return tip, closed

    def branchtip(self, branch):
        '''Return the tipmost open head on branch head, otherwise return the
        tipmost closed head on branch.
        Raise KeyError for unknown branch.'''
        return self._branchtip(self[branch])[0]

    def iteropen(self, nodes):
        return (n for n in nodes if n not in self._closednodes)

    def branchheads(self, branch, closed=False):
        self._verifybranch(branch)
        heads = self._entries[branch]
        if not closed:
            heads = list(self.iteropen(heads))
        return heads

    def iterbranches(self):
        for bn, heads in self.iteritems():
            yield (bn, heads) + self._branchtip(heads)

    def iterheads(self):
        """ returns all the heads """
        self._verifyall()
        return self._entries.itervalues()

    def copy(self):
        """return an deep copy of the branchcache object"""
        return type(self)(
            self._entries, self.tipnode, self.tiprev, self.filteredhash,
            self._closednodes)

    def write(self, repo):
        try:
            f = repo.cachevfs(self._filename(repo), "w", atomictemp=True)
            cachekey = [hex(self.tipnode), '%d' % self.tiprev]
            if self.filteredhash is not None:
                cachekey.append(hex(self.filteredhash))
            f.write(" ".join(cachekey) + '\n')
            nodecount = 0
            for label, nodes in sorted(self._entries.iteritems()):
                label = encoding.fromlocal(label)
                for node in nodes:
                    nodecount += 1
                    if node in self._closednodes:
                        state = 'c'
                    else:
                        state = 'o'
                    f.write("%s %s %s\n" % (hex(node), state, label))
            f.close()
            repo.ui.log('branchcache',
                        'wrote %s branch cache with %d labels and %d nodes\n',
                        repo.filtername, len(self._entries), nodecount)
        except (IOError, OSError, error.Abort) as inst:
            # Abort may be raised by read only opener, so log and continue
            repo.ui.debug("couldn't write branch cache: %s\n" %
                          stringutil.forcebytestr(inst))

    def update(self, repo, revgen):
        """Given a branchhead cache, self, that may have extra nodes or be
        missing heads, and a generator of nodes that are strictly a superset of
        heads missing, this function updates self to be correct.
        """
        starttime = util.timer()
        cl = repo.changelog
        # collect new branch entries
        newbranches = {}
        getbranchinfo = repo.revbranchcache().branchinfo
        for r in revgen:
            branch, closesbranch = getbranchinfo(r)
            newbranches.setdefault(branch, []).append(r)
            if closesbranch:
                self._closednodes.add(cl.node(r))

        # fetch current topological heads to speed up filtering
        topoheads = set(cl.headrevs())

        # new tip revision which we found after iterating items from new
        # branches
        ntiprev = self.tiprev

        # if older branchheads are reachable from new ones, they aren't
        # really branchheads. Note checking parents is insufficient:
        # 1 (branch a) -> 2 (branch b) -> 3 (branch a)
        for branch, newheadrevs in newbranches.iteritems():
            bheads = self._entries.setdefault(branch, [])
            bheadset = set(cl.rev(node) for node in bheads)

            # This have been tested True on all internal usage of this function.
            # run it again in case of doubt
            # assert not (set(bheadrevs) & set(newheadrevs))
            bheadset.update(newheadrevs)

            # This prunes out two kinds of heads - heads that are superseded by
            # a head in newheadrevs, and newheadrevs that are not heads because
            # an existing head is their descendant.
            uncertain = bheadset - topoheads
            if uncertain:
                floorrev = min(uncertain)
                ancestors = set(cl.ancestors(newheadrevs, floorrev))
                bheadset -= ancestors
            bheadrevs = sorted(bheadset)
            self[branch] = [cl.node(rev) for rev in bheadrevs]
            tiprev = bheadrevs[-1]
            if tiprev > ntiprev:
                ntiprev = tiprev

        if ntiprev > self.tiprev:
            self.tiprev = ntiprev
            self.tipnode = cl.node(ntiprev)

        if not self.validfor(repo):
            # cache key are not valid anymore
            self.tipnode = nullid
            self.tiprev = nullrev
            for heads in self.iterheads():
                tiprev = max(cl.rev(node) for node in heads)
                if tiprev > self.tiprev:
                    self.tipnode = cl.node(tiprev)
                    self.tiprev = tiprev
        self.filteredhash = scmutil.filteredhash(repo, self.tiprev)

        duration = util.timer() - starttime
        repo.ui.log('branchcache', 'updated %s branch cache in %.4f seconds\n',
                    repo.filtername or b'None', duration)

        self.write(repo)


class remotebranchcache(branchcache):
    """Branchmap info for a remote connection, should not write locally"""
    def write(self, repo):
        pass


# Revision branch info cache

_rbcversion = '-v1'
_rbcnames = 'rbc-names' + _rbcversion
_rbcrevs = 'rbc-revs' + _rbcversion
# [4 byte hash prefix][4 byte branch name number with sign bit indicating open]
_rbcrecfmt = '>4sI'
_rbcrecsize = calcsize(_rbcrecfmt)
_rbcnodelen = 4
_rbcbranchidxmask = 0x7fffffff
_rbccloseflag = 0x80000000

class revbranchcache(object):
    """Persistent cache, mapping from revision number to branch name and close.
    This is a low level cache, independent of filtering.

    Branch names are stored in rbc-names in internal encoding separated by 0.
    rbc-names is append-only, and each branch name is only stored once and will
    thus have a unique index.

    The branch info for each revision is stored in rbc-revs as constant size
    records. The whole file is read into memory, but it is only 'parsed' on
    demand. The file is usually append-only but will be truncated if repo
    modification is detected.
    The record for each revision contains the first 4 bytes of the
    corresponding node hash, and the record is only used if it still matches.
    Even a completely trashed rbc-revs fill thus still give the right result
    while converging towards full recovery ... assuming no incorrectly matching
    node hashes.
    The record also contains 4 bytes where 31 bits contains the index of the
    branch and the last bit indicate that it is a branch close commit.
    The usage pattern for rbc-revs is thus somewhat similar to 00changelog.i
    and will grow with it but be 1/8th of its size.
    """

    def __init__(self, repo, readonly=True):
        assert repo.filtername is None
        self._repo = repo
        self._names = [] # branch names in local encoding with static index
        self._rbcrevs = bytearray()
        self._rbcsnameslen = 0 # length of names read at _rbcsnameslen
        try:
            bndata = repo.cachevfs.read(_rbcnames)
            self._rbcsnameslen = len(bndata) # for verification before writing
            if bndata:
                self._names = [encoding.tolocal(bn)
                               for bn in bndata.split('\0')]
        except (IOError, OSError):
            if readonly:
                # don't try to use cache - fall back to the slow path
                self.branchinfo = self._branchinfo

        if self._names:
            try:
                data = repo.cachevfs.read(_rbcrevs)
                self._rbcrevs[:] = data
            except (IOError, OSError) as inst:
                repo.ui.debug("couldn't read revision branch cache: %s\n" %
                              stringutil.forcebytestr(inst))
        # remember number of good records on disk
        self._rbcrevslen = min(len(self._rbcrevs) // _rbcrecsize,
                               len(repo.changelog))
        if self._rbcrevslen == 0:
            self._names = []
        self._rbcnamescount = len(self._names) # number of names read at
                                               # _rbcsnameslen

    def _clear(self):
        self._rbcsnameslen = 0
        del self._names[:]
        self._rbcnamescount = 0
        self._rbcrevslen = len(self._repo.changelog)
        self._rbcrevs = bytearray(self._rbcrevslen * _rbcrecsize)
        util.clearcachedproperty(self, '_namesreverse')

    @util.propertycache
    def _namesreverse(self):
        return dict((b, r) for r, b in enumerate(self._names))

    def branchinfo(self, rev):
        """Return branch name and close flag for rev, using and updating
        persistent cache."""
        changelog = self._repo.changelog
        rbcrevidx = rev * _rbcrecsize

        # avoid negative index, changelog.read(nullrev) is fast without cache
        if rev == nullrev:
            return changelog.branchinfo(rev)

        # if requested rev isn't allocated, grow and cache the rev info
        if len(self._rbcrevs) < rbcrevidx + _rbcrecsize:
            return self._branchinfo(rev)

        # fast path: extract data from cache, use it if node is matching
        reponode = changelog.node(rev)[:_rbcnodelen]
        cachenode, branchidx = unpack_from(
            _rbcrecfmt, util.buffer(self._rbcrevs), rbcrevidx)
        close = bool(branchidx & _rbccloseflag)
        if close:
            branchidx &= _rbcbranchidxmask
        if cachenode == '\0\0\0\0':
            pass
        elif cachenode == reponode:
            try:
                return self._names[branchidx], close
            except IndexError:
                # recover from invalid reference to unknown branch
                self._repo.ui.debug("referenced branch names not found"
                    " - rebuilding revision branch cache from scratch\n")
                self._clear()
        else:
            # rev/node map has changed, invalidate the cache from here up
            self._repo.ui.debug("history modification detected - truncating "
                "revision branch cache to revision %d\n" % rev)
            truncate = rbcrevidx + _rbcrecsize
            del self._rbcrevs[truncate:]
            self._rbcrevslen = min(self._rbcrevslen, truncate)

        # fall back to slow path and make sure it will be written to disk
        return self._branchinfo(rev)

    def _branchinfo(self, rev):
        """Retrieve branch info from changelog and update _rbcrevs"""
        changelog = self._repo.changelog
        b, close = changelog.branchinfo(rev)
        if b in self._namesreverse:
            branchidx = self._namesreverse[b]
        else:
            branchidx = len(self._names)
            self._names.append(b)
            self._namesreverse[b] = branchidx
        reponode = changelog.node(rev)
        if close:
            branchidx |= _rbccloseflag
        self._setcachedata(rev, reponode, branchidx)
        return b, close

    def setdata(self, branch, rev, node, close):
        """add new data information to the cache"""
        if branch in self._namesreverse:
            branchidx = self._namesreverse[branch]
        else:
            branchidx = len(self._names)
            self._names.append(branch)
            self._namesreverse[branch] = branchidx
        if close:
            branchidx |= _rbccloseflag
        self._setcachedata(rev, node, branchidx)
        # If no cache data were readable (non exists, bad permission, etc)
        # the cache was bypassing itself by setting:
        #
        #   self.branchinfo = self._branchinfo
        #
        # Since we now have data in the cache, we need to drop this bypassing.
        if r'branchinfo' in vars(self):
            del self.branchinfo

    def _setcachedata(self, rev, node, branchidx):
        """Writes the node's branch data to the in-memory cache data."""
        if rev == nullrev:
            return
        rbcrevidx = rev * _rbcrecsize
        if len(self._rbcrevs) < rbcrevidx + _rbcrecsize:
            self._rbcrevs.extend('\0' *
                                 (len(self._repo.changelog) * _rbcrecsize -
                                  len(self._rbcrevs)))
        pack_into(_rbcrecfmt, self._rbcrevs, rbcrevidx, node, branchidx)
        self._rbcrevslen = min(self._rbcrevslen, rev)

        tr = self._repo.currenttransaction()
        if tr:
            tr.addfinalize('write-revbranchcache', self.write)

    def write(self, tr=None):
        """Save branch cache if it is dirty."""
        repo = self._repo
        wlock = None
        step = ''
        try:
            # write the new names
            if self._rbcnamescount < len(self._names):
                wlock = repo.wlock(wait=False)
                step = ' names'
                self._writenames(repo)

            # write the new revs
            start = self._rbcrevslen * _rbcrecsize
            if start != len(self._rbcrevs):
                step = ''
                if wlock is None:
                    wlock = repo.wlock(wait=False)
                self._writerevs(repo, start)

        except (IOError, OSError, error.Abort, error.LockError) as inst:
            repo.ui.debug("couldn't write revision branch cache%s: %s\n"
                          % (step, stringutil.forcebytestr(inst)))
        finally:
            if wlock is not None:
                wlock.release()

    def _writenames(self, repo):
        """ write the new branch names to revbranchcache """
        if self._rbcnamescount != 0:
            f = repo.cachevfs.open(_rbcnames, 'ab')
            if f.tell() == self._rbcsnameslen:
                f.write('\0')
            else:
                f.close()
                repo.ui.debug("%s changed - rewriting it\n" % _rbcnames)
                self._rbcnamescount = 0
                self._rbcrevslen = 0
        if self._rbcnamescount == 0:
            # before rewriting names, make sure references are removed
            repo.cachevfs.unlinkpath(_rbcrevs, ignoremissing=True)
            f = repo.cachevfs.open(_rbcnames, 'wb')
        f.write('\0'.join(encoding.fromlocal(b)
                          for b in self._names[self._rbcnamescount:]))
        self._rbcsnameslen = f.tell()
        f.close()
        self._rbcnamescount = len(self._names)

    def _writerevs(self, repo, start):
        """ write the new revs to revbranchcache """
        revs = min(len(repo.changelog), len(self._rbcrevs) // _rbcrecsize)
        with repo.cachevfs.open(_rbcrevs, 'ab') as f:
            if f.tell() != start:
                repo.ui.debug("truncating cache/%s to %d\n" % (_rbcrevs, start))
                f.seek(start)
                if f.tell() != start:
                    start = 0
                    f.seek(start)
                f.truncate()
            end = revs * _rbcrecsize
            f.write(self._rbcrevs[start:end])
        self._rbcrevslen = revs
author	Taapas Agrawal <taapas2897@gmail.com>
date	Sun, 23 Jun 2019 23:11:35 +0530
parents	9893d7aa7420
children	c7d236b55a3e