Mercurial > hg
view tests/test-contrib.t @ 24790:baa11dde8c0e
match: add a subclass for dirstate normalizing of the matched patterns
This class is only needed on case insensitive filesystems, and only
for wdir context matches. It allows the user to not match the case of
the items in the filesystem- especially for naming directories, which
dirstate doesn't handle[1]. Making dirstate handle mismatched
directory cases is too expensive[2].
Since dirstate doesn't apply to committed csets, this is only created by
overriding basectx.match() in workingctx, and only on icasefs. The default
arguments have been dropped, because the ctx must be passed to the matcher in
order to function.
For operations that can apply to both wdir and some other context, this ends up
normalizing the filename to the case as it exists in the filesystem, and using
that case for the lookup in the other context. See the diff example in the
test.
Previously, given a directory with an inexact case:
- add worked as expected
- diff, forget and status would silently ignore the request
- files would exit with 1
- commit, revert and remove would fail (even when the commands leading up to
them worked):
$ hg ci -m "AbCDef" capsdir1/capsdir
abort: CapsDir1/CapsDir: no match under directory!
$ hg revert -r '.^' capsdir1/capsdir
capsdir1\capsdir: no such file in rev 64dae27060b7
$ hg remove capsdir1/capsdir
not removing capsdir1\capsdir: no tracked files
[1]
Globs are normalized, so that the -I and -X don't need to be specified with a
case match. Without that, the second last remove (with -X) removes the files,
leaving nothing for the last remove. However, specifying the files as
'glob:**.Txt' does not work. Perhaps this requires 're.IGNORECASE'?
There are only a handful of places that create matchers directly, instead of
being routed through the context.match() method. Some may benefit from changing
over to using ctx.match() as a factory function:
revset.checkstatus()
revset.contains()
revset.filelog()
revset._matchfiles()
localrepository._loadfilter()
ignore.ignore()
fileset.subrepo()
filemerge._picktool()
overrides.addlargefiles()
lfcommands.lfconvert()
kwtemplate.__init__()
eolfile.__init__()
eolfile.checkrev()
acl.buildmatch()
Currently, a toplevel subrepo can be named with an inexact case. However, the
path auditor gets in the way of naming _anything_ in the subrepo if the top
level case doesn't match. That is trickier to handle, because there's the user
provided case, the case in the filesystem, and the case stored in .hgsub. This
can be fixed next cycle.
--- a/tests/test-subrepo-deep-nested-change.t
+++ b/tests/test-subrepo-deep-nested-change.t
@@ -170,8 +170,15 @@
R sub1/sub2/test.txt
$ hg update -Cq
$ touch sub1/sub2/folder/bar
+#if icasefs
+ $ hg addremove Sub1/sub2
+ abort: path 'Sub1\sub2' is inside nested repo 'Sub1'
+ [255]
+ $ hg -q addremove sub1/sub2
+#else
$ hg addremove sub1/sub2
adding sub1/sub2/folder/bar (glob)
+#endif
$ hg status -S
A sub1/sub2/folder/bar
? foo/bar/abc
The narrowmatcher class may need to be tweaked when that is fixed.
[1] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068183.html
[2] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068191.html
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sun, 12 Apr 2015 01:39:21 -0400 |
parents | c63a09b6b337 |
children | ef1eb6df7071 |
line wrap: on
line source
Set vars: $ CONTRIBDIR="$TESTDIR/../contrib" Prepare repo-a: $ hg init repo-a $ cd repo-a $ echo this is file a > a $ hg add a $ hg commit -m first $ echo adding to file a >> a $ hg commit -m second $ echo adding more to file a >> a $ hg commit -m third $ hg verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 3 changesets, 3 total revisions Dumping revlog of file a to stdout: $ python "$CONTRIBDIR/dumprevlog" .hg/store/data/a.i file: .hg/store/data/a.i node: 183d2312b35066fb6b3b449b84efc370d50993d0 linkrev: 0 parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 length: 15 -start- this is file a -end- node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b linkrev: 1 parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000 length: 32 -start- this is file a adding to file a -end- node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1 linkrev: 2 parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000 length: 54 -start- this is file a adding to file a adding more to file a -end- Dump all revlogs to file repo.dump: $ find .hg/store -name "*.i" | sort | xargs python "$CONTRIBDIR/dumprevlog" > ../repo.dump $ cd .. Undumping into repo-b: $ hg init repo-b $ cd repo-b $ python "$CONTRIBDIR/undumprevlog" < ../repo.dump .hg/store/00changelog.i .hg/store/00manifest.i .hg/store/data/a.i $ cd .. Rebuild fncache with clone --pull: $ hg clone --pull -U repo-b repo-c requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 3 changes to 1 files Verify: $ hg -R repo-c verify checking changesets checking manifests crosschecking files in changesets and manifests checking files 1 files, 3 changesets, 3 total revisions Compare repos: $ hg -R repo-c incoming repo-a comparing with repo-a searching for changes no changes found [1] $ hg -R repo-a incoming repo-c comparing with repo-c searching for changes no changes found [1] Test simplemerge command: $ cp "$CONTRIBDIR/simplemerge" . $ echo base > base $ echo local > local $ cat base >> local $ cp local orig $ cat base > other $ echo other >> other changing local directly $ python simplemerge local base other && echo "merge succeeded" merge succeeded $ cat local local base other $ cp orig local printing to stdout $ python simplemerge -p local base other local base other local: $ cat local local base conflicts $ cp base conflict-local $ cp other conflict-other $ echo not other >> conflict-local $ echo end >> conflict-local $ echo end >> conflict-other $ python simplemerge -p conflict-local base conflict-other base <<<<<<< conflict-local not other end ======= other end >>>>>>> conflict-other warning: conflicts during merge. [1] 1 label $ python simplemerge -p -L foo conflict-local base conflict-other base <<<<<<< foo not other end ======= other end >>>>>>> conflict-other warning: conflicts during merge. [1] 2 labels $ python simplemerge -p -L foo -L bar conflict-local base conflict-other base <<<<<<< foo not other end ======= other end >>>>>>> bar warning: conflicts during merge. [1] 3 labels $ python simplemerge -p -L foo -L bar -L base conflict-local base conflict-other base <<<<<<< foo not other end ||||||| base ======= other end >>>>>>> bar warning: conflicts during merge. [1] too many labels $ python simplemerge -p -L foo -L bar -L baz -L buz conflict-local base conflict-other abort: can only specify three labels. [255] binary file $ $PYTHON -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()" $ cat orig >> binary-local $ python simplemerge -p binary-local base other warning: binary-local looks like a binary file. [1] binary file --text $ python simplemerge -a -p binary-local base other 2>&1 warning: binary-local looks like a binary file. \x00local (esc) base other help $ python simplemerge --help simplemerge [OPTS] LOCAL BASE OTHER Simple three-way file merge utility with a minimal feature set. Apply to LOCAL the changes necessary to go from BASE to OTHER. By default, LOCAL is overwritten with the results of this operation. options: -L --label labels to use on conflict markers -a --text treat all files as text -p --print print results instead of overwriting LOCAL --no-minimal no effect (DEPRECATED) -h --help display help and exit -q --quiet suppress output wrong number of arguments $ python simplemerge simplemerge: wrong number of arguments simplemerge [OPTS] LOCAL BASE OTHER Simple three-way file merge utility with a minimal feature set. Apply to LOCAL the changes necessary to go from BASE to OTHER. By default, LOCAL is overwritten with the results of this operation. options: -L --label labels to use on conflict markers -a --text treat all files as text -p --print print results instead of overwriting LOCAL --no-minimal no effect (DEPRECATED) -h --help display help and exit -q --quiet suppress output [1] bad option $ python simplemerge --foo -p local base other simplemerge: option --foo not recognized simplemerge [OPTS] LOCAL BASE OTHER Simple three-way file merge utility with a minimal feature set. Apply to LOCAL the changes necessary to go from BASE to OTHER. By default, LOCAL is overwritten with the results of this operation. options: -L --label labels to use on conflict markers -a --text treat all files as text -p --print print results instead of overwriting LOCAL --no-minimal no effect (DEPRECATED) -h --help display help and exit -q --quiet suppress output [1]