view tests/test-convert-svn-branches.t @ 24790:baa11dde8c0e

match: add a subclass for dirstate normalizing of the matched patterns

This class is only needed on case insensitive filesystems, and only
for wdir context matches. It allows the user to not match the case of
the items in the filesystem- especially for naming directories, which
dirstate doesn't handle[1]. Making dirstate handle mismatched
directory cases is too expensive[2].

Since dirstate doesn't apply to committed csets, this is only created by
overriding basectx.match() in workingctx, and only on icasefs.  The default
arguments have been dropped, because the ctx must be passed to the matcher in
order to function.

For operations that can apply to both wdir and some other context, this ends up
normalizing the filename to the case as it exists in the filesystem, and using
that case for the lookup in the other context.  See the diff example in the
test.

Previously, given a directory with an inexact case:

  - add worked as expected

  - diff, forget and status would silently ignore the request

  - files would exit with 1

  - commit, revert and remove would fail (even when the commands leading up to
    them worked):

        $ hg ci -m "AbCDef" capsdir1/capsdir
        abort: CapsDir1/CapsDir: no match under directory!

        $ hg revert -r '.^' capsdir1/capsdir
        capsdir1\capsdir: no such file in rev 64dae27060b7

        $ hg remove capsdir1/capsdir
        not removing capsdir1\capsdir: no tracked files
        [1]

Globs are normalized, so that the -I and -X don't need to be specified with a
case match.  Without that, the second last remove (with -X) removes the files,
leaving nothing for the last remove.  However, specifying the files as
'glob:**.Txt' does not work.  Perhaps this requires 're.IGNORECASE'?

There are only a handful of places that create matchers directly, instead of
being routed through the context.match() method.  Some may benefit from changing
over to using ctx.match() as a factory function:

  revset.checkstatus()
  revset.contains()
  revset.filelog()
  revset._matchfiles()
  localrepository._loadfilter()
  ignore.ignore()
  fileset.subrepo()
  filemerge._picktool()
  overrides.addlargefiles()
  lfcommands.lfconvert()
  kwtemplate.__init__()
  eolfile.__init__()
  eolfile.checkrev()
  acl.buildmatch()

Currently, a toplevel subrepo can be named with an inexact case.  However, the
path auditor gets in the way of naming _anything_ in the subrepo if the top
level case doesn't match.  That is trickier to handle, because there's the user
provided case, the case in the filesystem, and the case stored in .hgsub.  This
can be fixed next cycle.

  --- a/tests/test-subrepo-deep-nested-change.t
  +++ b/tests/test-subrepo-deep-nested-change.t
  @@ -170,8 +170,15 @@
     R sub1/sub2/test.txt
     $ hg update -Cq
     $ touch sub1/sub2/folder/bar
  +#if icasefs
  +  $ hg addremove Sub1/sub2
  +  abort: path 'Sub1\sub2' is inside nested repo 'Sub1'
  +  [255]
  +  $ hg -q addremove sub1/sub2
  +#else
     $ hg addremove sub1/sub2
     adding sub1/sub2/folder/bar (glob)
  +#endif
     $ hg status -S
     A sub1/sub2/folder/bar
     ? foo/bar/abc

The narrowmatcher class may need to be tweaked when that is fixed.


[1] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068183.html
[2] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068191.html

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/branches.svndump"

Convert trunk and branches

  $ cat > branchmap <<EOF
  > old3 newbranch
  > 
  > 
  > EOF
  $ hg convert --branchmap=branchmap --datesort -r 10 svn-repo A-hg
  initializing destination A-hg repository
  scanning source...
  sorting...
  converting...
  10 init projA
  9 hello
  8 branch trunk, remove c and dir
  7 change a
  6 change b
  5 move and update c
  4 move and update c
  3 change b again
  2 move to old2
  1 move back to old
  0 last change to a

Test template keywords

  $ hg -R A-hg log --template '{rev} {svnuuid}{svnpath}@{svnrev}\n'
  10 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@10
  9 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@9
  8 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old2@8
  7 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@7
  6 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@6
  5 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@6
  4 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@5
  3 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@4
  2 644ede6c-2b81-4367-9dc8-d786514f2cde/branches/old@3
  1 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@2
  0 644ede6c-2b81-4367-9dc8-d786514f2cde/trunk@1

Convert again

  $ hg convert --branchmap=branchmap --datesort svn-repo A-hg
  scanning source...
  sorting...
  converting...
  0 branch trunk@1 into old3

  $ cd A-hg
  $ hg log -G --template 'branch={branches} {rev} {desc|firstline} files: {files}\n'
  o  branch=newbranch 11 branch trunk@1 into old3 files:
  |
  | o  branch= 10 last change to a files: a
  | |
  | | o  branch=old 9 move back to old files:
  | | |
  | | o  branch=old2 8 move to old2 files:
  | | |
  | | o  branch=old 7 change b again files: b
  | | |
  | o |  branch= 6 move and update c files: b
  | | |
  | | o  branch=old 5 move and update c files: c
  | | |
  | | o  branch=old 4 change b files: b
  | | |
  | o |  branch= 3 change a files: a
  | | |
  | | o  branch=old 2 branch trunk, remove c and dir files: c
  | |/
  | o  branch= 1 hello files: a b c dir/e
  |/
  o  branch= 0 init projA files:
  

  $ hg branches
  newbranch                     11:a6d7cc050ad1
  default                       10:6e2b33404495
  old                            9:93c4b0f99529
  old2                           8:b52884d7bead (inactive)
  $ hg tags -q
  tip
  $ cd ..

Test hg failing to call itself

  $ HG=foobar hg convert svn-repo B-hg 2>&1 | grep abort
  abort: Mercurial failed to run itself, check hg executable is in PATH

Convert 'trunk' to branch other than 'default'

  $ cat > branchmap <<EOF
  > None hgtrunk
  > 
  > 
  > EOF
  $ hg convert --branchmap=branchmap --datesort -r 10 svn-repo C-hg
  initializing destination C-hg repository
  scanning source...
  sorting...
  converting...
  10 init projA
  9 hello
  8 branch trunk, remove c and dir
  7 change a
  6 change b
  5 move and update c
  4 move and update c
  3 change b again
  2 move to old2
  1 move back to old
  0 last change to a

  $ cd C-hg
  $ hg branches
  hgtrunk                       10:745f063703b4
  old                            9:aa50d7b8d922
  old2                           8:c85a22267b6e (inactive)
  $ cd ..