Mercurial > hg
view tests/test-status.t @ 24790:baa11dde8c0e
match: add a subclass for dirstate normalizing of the matched patterns
This class is only needed on case insensitive filesystems, and only
for wdir context matches. It allows the user to not match the case of
the items in the filesystem- especially for naming directories, which
dirstate doesn't handle[1]. Making dirstate handle mismatched
directory cases is too expensive[2].
Since dirstate doesn't apply to committed csets, this is only created by
overriding basectx.match() in workingctx, and only on icasefs. The default
arguments have been dropped, because the ctx must be passed to the matcher in
order to function.
For operations that can apply to both wdir and some other context, this ends up
normalizing the filename to the case as it exists in the filesystem, and using
that case for the lookup in the other context. See the diff example in the
test.
Previously, given a directory with an inexact case:
- add worked as expected
- diff, forget and status would silently ignore the request
- files would exit with 1
- commit, revert and remove would fail (even when the commands leading up to
them worked):
$ hg ci -m "AbCDef" capsdir1/capsdir
abort: CapsDir1/CapsDir: no match under directory!
$ hg revert -r '.^' capsdir1/capsdir
capsdir1\capsdir: no such file in rev 64dae27060b7
$ hg remove capsdir1/capsdir
not removing capsdir1\capsdir: no tracked files
[1]
Globs are normalized, so that the -I and -X don't need to be specified with a
case match. Without that, the second last remove (with -X) removes the files,
leaving nothing for the last remove. However, specifying the files as
'glob:**.Txt' does not work. Perhaps this requires 're.IGNORECASE'?
There are only a handful of places that create matchers directly, instead of
being routed through the context.match() method. Some may benefit from changing
over to using ctx.match() as a factory function:
revset.checkstatus()
revset.contains()
revset.filelog()
revset._matchfiles()
localrepository._loadfilter()
ignore.ignore()
fileset.subrepo()
filemerge._picktool()
overrides.addlargefiles()
lfcommands.lfconvert()
kwtemplate.__init__()
eolfile.__init__()
eolfile.checkrev()
acl.buildmatch()
Currently, a toplevel subrepo can be named with an inexact case. However, the
path auditor gets in the way of naming _anything_ in the subrepo if the top
level case doesn't match. That is trickier to handle, because there's the user
provided case, the case in the filesystem, and the case stored in .hgsub. This
can be fixed next cycle.
--- a/tests/test-subrepo-deep-nested-change.t
+++ b/tests/test-subrepo-deep-nested-change.t
@@ -170,8 +170,15 @@
R sub1/sub2/test.txt
$ hg update -Cq
$ touch sub1/sub2/folder/bar
+#if icasefs
+ $ hg addremove Sub1/sub2
+ abort: path 'Sub1\sub2' is inside nested repo 'Sub1'
+ [255]
+ $ hg -q addremove sub1/sub2
+#else
$ hg addremove sub1/sub2
adding sub1/sub2/folder/bar (glob)
+#endif
$ hg status -S
A sub1/sub2/folder/bar
? foo/bar/abc
The narrowmatcher class may need to be tweaked when that is fixed.
[1] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068183.html
[2] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068191.html
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sun, 12 Apr 2015 01:39:21 -0400 |
parents | 7d01371e6358 |
children | e8075329c5fb |
line wrap: on
line source
$ hg init repo1 $ cd repo1 $ mkdir a b a/1 b/1 b/2 $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2 hg status in repo root: $ hg status ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root hg status . in repo root: $ hg status . ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a . ? 1/in_a_1 ? in_a $ hg status --cwd a .. ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ hg status --cwd b ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b . ? 1/in_b_1 ? 2/in_b_2 ? in_b $ hg status --cwd b .. ? ../a/1/in_a_1 ? ../a/in_a ? 1/in_b_1 ? 2/in_b_2 ? in_b ? ../in_root $ hg status --cwd a/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a/1 . ? in_a_1 $ hg status --cwd a/1 .. ? in_a_1 ? ../in_a $ hg status --cwd b/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/1 . ? in_b_1 $ hg status --cwd b/1 .. ? in_b_1 ? ../2/in_b_2 ? ../in_b $ hg status --cwd b/2 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/2 . ? in_b_2 $ hg status --cwd b/2 .. ? ../1/in_b_1 ? in_b_2 ? ../in_b combining patterns with root and patterns without a root works $ hg st a/in_a re:.*b$ ? a/in_a ? b/in_b $ cd .. $ hg init repo2 $ cd repo2 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg ci -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch modified added unknown ignored $ hg add added $ hg remove removed $ rm deleted hg status: $ hg status A added R removed ! deleted ? unknown hg status modified added removed deleted unknown never-existed ignored: $ hg status modified added removed deleted unknown never-existed ignored never-existed: * (glob) A added R removed ! deleted ? unknown $ hg copy modified copied hg status -C: $ hg status -C A added A copied modified R removed ! deleted ? unknown hg status -A: $ hg status -A A added A copied modified R removed ! deleted ? unknown I ignored C .hgignore C modified $ hg status -A -Tjson [ { "path": "added", "status": "A" }, { "copy": "modified", "path": "copied", "status": "A" }, { "path": "removed", "status": "R" }, { "path": "deleted", "status": "!" }, { "path": "unknown", "status": "?" }, { "path": "ignored", "status": "I" }, { "path": ".hgignore", "status": "C" }, { "path": "modified", "status": "C" } ] $ hg status -A -Tpickle > pickle >>> import pickle >>> print sorted((x['status'], x['path']) for x in pickle.load(open("pickle"))) [('!', 'deleted'), ('?', 'pickle'), ('?', 'unknown'), ('A', 'added'), ('A', 'copied'), ('C', '.hgignore'), ('C', 'modified'), ('I', 'ignored'), ('R', 'removed')] $ rm pickle $ echo "^ignoreddir$" > .hgignore $ mkdir ignoreddir $ touch ignoreddir/file hg status ignoreddir/file: $ hg status ignoreddir/file hg status -i ignoreddir/file: $ hg status -i ignoreddir/file I ignoreddir/file $ cd .. Check 'status -q' and some combinations $ hg init repo3 $ cd repo3 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg commit -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch added unknown ignored $ hg add added $ echo "test" >> modified $ hg remove removed $ rm deleted $ hg copy modified copied Specify working directory revision explicitly, that should be the same as "hg status" $ hg status --change "wdir()" M modified A added A copied R removed ! deleted ? unknown Run status with 2 different flags. Check if result is the same or different. If result is not as expected, raise error $ assert() { > hg status $1 > ../a > hg status $2 > ../b > if diff ../a ../b > /dev/null; then > out=0 > else > out=1 > fi > if [ $3 -eq 0 ]; then > df="same" > else > df="different" > fi > if [ $out -ne $3 ]; then > echo "Error on $1 and $2, should be $df." > fi > } Assert flag1 flag2 [0-same | 1-different] $ assert "-q" "-mard" 0 $ assert "-A" "-marduicC" 0 $ assert "-qA" "-mardcC" 0 $ assert "-qAui" "-A" 0 $ assert "-qAu" "-marducC" 0 $ assert "-qAi" "-mardicC" 0 $ assert "-qu" "-u" 0 $ assert "-q" "-u" 1 $ assert "-m" "-a" 1 $ assert "-r" "-d" 1 $ cd .. $ hg init repo4 $ cd repo4 $ touch modified removed deleted $ hg ci -q -A -m 'initial checkin' $ touch added unknown $ hg add added $ hg remove removed $ rm deleted $ echo x > modified $ hg copy modified copied $ hg ci -m 'test checkin' -d "1000001 0" $ rm * $ touch unrelated $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0" hg status --change 1: $ hg status --change 1 M modified A added A copied R removed hg status --change 1 unrelated: $ hg status --change 1 unrelated hg status -C --change 1 added modified copied removed deleted: $ hg status -C --change 1 added modified copied removed deleted M modified A added A copied modified R removed hg status -A --change 1 and revset: $ hg status -A --change '1|1' M modified A added A copied modified R removed C deleted $ cd .. hg status of binary file starting with '\1\n', a separator for metadata: $ hg init repo5 $ cd repo5 >>> open("010a", "wb").write("\1\nfoo") $ hg ci -q -A -m 'initial checkin' $ hg status -A C 010a >>> open("010a", "wb").write("\1\nbar") $ hg status -A M 010a $ hg ci -q -m 'modify 010a' $ hg status -A --rev 0:1 M 010a $ touch empty $ hg ci -q -A -m 'add another file' $ hg status -A --rev 1:2 010a C 010a $ cd .. test "hg status" with "directory pattern" which matches against files only known on target revision. $ hg init repo6 $ cd repo6 $ echo a > a.txt $ hg add a.txt $ hg commit -m '#0' $ mkdir -p 1/2/3/4/5 $ echo b > 1/2/3/4/5/b.txt $ hg add 1/2/3/4/5/b.txt $ hg commit -m '#1' $ hg update -C 0 > /dev/null $ hg status -A C a.txt the directory matching against specified pattern should be removed, because directory existence prevents 'dirstate.walk()' from showing warning message about such pattern. $ test ! -d 1 $ hg status -A --rev 1 1/2/3/4/5/b.txt R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3/4/5 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1 R 1/2/3/4/5/b.txt $ hg status --config ui.formatdebug=True --rev 1 1 status = [ {*'path': '1/2/3/4/5/b.txt'*}, (glob) ] #if windows $ hg --config ui.slash=false status -A --rev 1 1 R 1\2\3\4\5\b.txt #endif $ cd .. Status after move overwriting a file (issue4458) ================================================= $ hg init issue4458 $ cd issue4458 $ echo a > a $ echo b > b $ hg commit -Am base adding a adding b with --force $ hg mv b --force a $ hg st --copies M a b R b $ hg revert --all reverting a undeleting b $ rm *.orig without force $ hg rm a $ hg st --copies R a $ hg mv b a $ hg st --copies M a b R b using ui.statuscopies setting $ hg st --config ui.statuscopies=true M a b R b $ hg st --config ui.statuscopies=false M a R b Other "bug" highlight, the revision status does not report the copy information. This is buggy behavior. $ hg commit -m 'blah' $ hg st --copies --change . M a R b $ cd ..