Mercurial > hg
view tests/test-treediscovery-legacy.t @ 24790:baa11dde8c0e
match: add a subclass for dirstate normalizing of the matched patterns
This class is only needed on case insensitive filesystems, and only
for wdir context matches. It allows the user to not match the case of
the items in the filesystem- especially for naming directories, which
dirstate doesn't handle[1]. Making dirstate handle mismatched
directory cases is too expensive[2].
Since dirstate doesn't apply to committed csets, this is only created by
overriding basectx.match() in workingctx, and only on icasefs. The default
arguments have been dropped, because the ctx must be passed to the matcher in
order to function.
For operations that can apply to both wdir and some other context, this ends up
normalizing the filename to the case as it exists in the filesystem, and using
that case for the lookup in the other context. See the diff example in the
test.
Previously, given a directory with an inexact case:
- add worked as expected
- diff, forget and status would silently ignore the request
- files would exit with 1
- commit, revert and remove would fail (even when the commands leading up to
them worked):
$ hg ci -m "AbCDef" capsdir1/capsdir
abort: CapsDir1/CapsDir: no match under directory!
$ hg revert -r '.^' capsdir1/capsdir
capsdir1\capsdir: no such file in rev 64dae27060b7
$ hg remove capsdir1/capsdir
not removing capsdir1\capsdir: no tracked files
[1]
Globs are normalized, so that the -I and -X don't need to be specified with a
case match. Without that, the second last remove (with -X) removes the files,
leaving nothing for the last remove. However, specifying the files as
'glob:**.Txt' does not work. Perhaps this requires 're.IGNORECASE'?
There are only a handful of places that create matchers directly, instead of
being routed through the context.match() method. Some may benefit from changing
over to using ctx.match() as a factory function:
revset.checkstatus()
revset.contains()
revset.filelog()
revset._matchfiles()
localrepository._loadfilter()
ignore.ignore()
fileset.subrepo()
filemerge._picktool()
overrides.addlargefiles()
lfcommands.lfconvert()
kwtemplate.__init__()
eolfile.__init__()
eolfile.checkrev()
acl.buildmatch()
Currently, a toplevel subrepo can be named with an inexact case. However, the
path auditor gets in the way of naming _anything_ in the subrepo if the top
level case doesn't match. That is trickier to handle, because there's the user
provided case, the case in the filesystem, and the case stored in .hgsub. This
can be fixed next cycle.
--- a/tests/test-subrepo-deep-nested-change.t
+++ b/tests/test-subrepo-deep-nested-change.t
@@ -170,8 +170,15 @@
R sub1/sub2/test.txt
$ hg update -Cq
$ touch sub1/sub2/folder/bar
+#if icasefs
+ $ hg addremove Sub1/sub2
+ abort: path 'Sub1\sub2' is inside nested repo 'Sub1'
+ [255]
+ $ hg -q addremove sub1/sub2
+#else
$ hg addremove sub1/sub2
adding sub1/sub2/folder/bar (glob)
+#endif
$ hg status -S
A sub1/sub2/folder/bar
? foo/bar/abc
The narrowmatcher class may need to be tweaked when that is fixed.
[1] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068183.html
[2] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068191.html
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sun, 12 Apr 2015 01:39:21 -0400 |
parents | 7a9cbb315d84 |
children | b5c8ee72debc |
line wrap: on
line source
#require killdaemons Tests discovery against servers without getbundle support: $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF $ cp $HGRCPATH $HGRCPATH-withcap $ CAP="getbundle known changegroupsubset" $ . "$TESTDIR/notcapable" $ cp $HGRCPATH $HGRCPATH-nocap $ cp $HGRCPATH-withcap $HGRCPATH Prep for test server without branchmap support $ CAP="branchmap" $ . "$TESTDIR/notcapable" $ cp $HGRCPATH $HGRCPATH-nocap-branchmap $ cp $HGRCPATH-withcap $HGRCPATH Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > cp $HGRCPATH-nocap $HGRCPATH > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > "$TESTDIR/killdaemons.py" $DAEMON_PIDS > cp $HGRCPATH-withcap $HGRCPATH > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability! [255] $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ cp $HGRCPATH-withcap $HGRCPATH $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cp $HGRCPATH-nocap $HGRCPATH $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Remote is empty: $ tstop ; tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is superset: $ tstop $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Partial pull: $ tstop ; tstart main $ hg clone $remote partial --rev name2 abort: partial pull cannot be done because other repository doesn't support changegroupsubset. [255] $ hg init partial; cd partial $ hg incoming $remote --rev name2 comparing with http://localhost:$HGPORT/ abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability! [255] $ hg pull $remote --rev name2 pulling from http://localhost:$HGPORT/ abort: partial pull cannot be done because other repository doesn't support changegroupsubset. [255] $ cd .. $ tstop Exercise pushing to server without branchmap capability $ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap $ hg init rlocal $ cd rlocal $ echo A > A $ hg ci -Am A adding A $ cd .. $ hg clone rlocal rremote updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd rlocal $ echo B > B $ hg ci -Am B adding B $ cd .. $ tstart rremote $ cd rlocal $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 1 27547f69f254: B $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop