Mercurial > hg
view tests/test-wireproto.t @ 24790:baa11dde8c0e
match: add a subclass for dirstate normalizing of the matched patterns
This class is only needed on case insensitive filesystems, and only
for wdir context matches. It allows the user to not match the case of
the items in the filesystem- especially for naming directories, which
dirstate doesn't handle[1]. Making dirstate handle mismatched
directory cases is too expensive[2].
Since dirstate doesn't apply to committed csets, this is only created by
overriding basectx.match() in workingctx, and only on icasefs. The default
arguments have been dropped, because the ctx must be passed to the matcher in
order to function.
For operations that can apply to both wdir and some other context, this ends up
normalizing the filename to the case as it exists in the filesystem, and using
that case for the lookup in the other context. See the diff example in the
test.
Previously, given a directory with an inexact case:
- add worked as expected
- diff, forget and status would silently ignore the request
- files would exit with 1
- commit, revert and remove would fail (even when the commands leading up to
them worked):
$ hg ci -m "AbCDef" capsdir1/capsdir
abort: CapsDir1/CapsDir: no match under directory!
$ hg revert -r '.^' capsdir1/capsdir
capsdir1\capsdir: no such file in rev 64dae27060b7
$ hg remove capsdir1/capsdir
not removing capsdir1\capsdir: no tracked files
[1]
Globs are normalized, so that the -I and -X don't need to be specified with a
case match. Without that, the second last remove (with -X) removes the files,
leaving nothing for the last remove. However, specifying the files as
'glob:**.Txt' does not work. Perhaps this requires 're.IGNORECASE'?
There are only a handful of places that create matchers directly, instead of
being routed through the context.match() method. Some may benefit from changing
over to using ctx.match() as a factory function:
revset.checkstatus()
revset.contains()
revset.filelog()
revset._matchfiles()
localrepository._loadfilter()
ignore.ignore()
fileset.subrepo()
filemerge._picktool()
overrides.addlargefiles()
lfcommands.lfconvert()
kwtemplate.__init__()
eolfile.__init__()
eolfile.checkrev()
acl.buildmatch()
Currently, a toplevel subrepo can be named with an inexact case. However, the
path auditor gets in the way of naming _anything_ in the subrepo if the top
level case doesn't match. That is trickier to handle, because there's the user
provided case, the case in the filesystem, and the case stored in .hgsub. This
can be fixed next cycle.
--- a/tests/test-subrepo-deep-nested-change.t
+++ b/tests/test-subrepo-deep-nested-change.t
@@ -170,8 +170,15 @@
R sub1/sub2/test.txt
$ hg update -Cq
$ touch sub1/sub2/folder/bar
+#if icasefs
+ $ hg addremove Sub1/sub2
+ abort: path 'Sub1\sub2' is inside nested repo 'Sub1'
+ [255]
+ $ hg -q addremove sub1/sub2
+#else
$ hg addremove sub1/sub2
adding sub1/sub2/folder/bar (glob)
+#endif
$ hg status -S
A sub1/sub2/folder/bar
? foo/bar/abc
The narrowmatcher class may need to be tweaked when that is fixed.
[1] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068183.html
[2] http://www.selenic.com/pipermail/mercurial-devel/2015-April/068191.html
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sun, 12 Apr 2015 01:39:21 -0400 |
parents | 7a9cbb315d84 |
children | 4d2b9b304ad0 |
line wrap: on
line source
#require killdaemons Test wire protocol argument passing Setup repo: $ hg init repo Local: $ hg debugwireargs repo eins zwei --three drei --four vier eins zwei drei vier None $ hg debugwireargs repo eins zwei --four vier eins zwei None vier None $ hg debugwireargs repo eins zwei eins zwei None None None $ hg debugwireargs repo eins zwei --five fuenf eins zwei None None fuenf HTTP: $ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid -E error.log -A access.log $ cat hg1.pid >> $DAEMON_PIDS $ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre un deux trois quatre None $ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\ qu\ \ atre un deux trois qu atre None $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier eins zwei None vier None $ hg debugwireargs http://localhost:$HGPORT/ eins zwei eins zwei None None None $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf eins zwei None None None $ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None $ cat error.log $ cat access.log * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob) * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob) HTTP without the httpheader capability: $ HGRCPATH="`pwd`/repo/.hgrc" $ export HGRCPATH $ CAP=httpheader $ . "$TESTDIR/notcapable" $ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log $ cat hg2.pid >> $DAEMON_PIDS $ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre un deux trois quatre None $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier eins zwei None vier None $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei eins zwei None None None $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf eins zwei None None None $ cat error2.log $ cat access2.log * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob) * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob) SSH (try to exercise the ssh functionality with a dummy script): $ cat <<EOF > dummyssh > import sys > import os > os.chdir(os.path.dirname(sys.argv[0])) > if sys.argv[1] != "user@dummy": > sys.exit(-1) > if not os.path.exists("dummyssh"): > sys.exit(-1) > os.environ["SSH_CLIENT"] = "127.0.0.1 1 2" > r = os.system(sys.argv[2]) > sys.exit(bool(r)) > EOF $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo uno due tre quattro uno due tre quattro None $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --four vier eins zwei None vier None $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei eins zwei None None None $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --five fuenf eins zwei None None None Explicitly kill daemons to let the test exit on Windows $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS