view mercurial/commandserver.py @ 26755:bb0b955d050d

streamclone: support for producing and consuming stream clone bundles

Up to this point, stream clones only existed as a dynamically generated
data format produced and consumed during streaming clones. In order to
support this efficient cloning format with the clone bundles feature, we
need a more formal, on disk representation of the streaming clone data.

This patch introduces a new "bundle" type for streaming clones. Unlike
existing bundles, it does not contain changegroup data. It does,
however, share the same concepts like the 4 byte header which identifies
the type of data that follows and the 2 byte abbreviation for
compression types (of which only "UN" is currently supported).

The new bundle format is essentially the existing stream clone version 1
data format with some headers at the beginning.

Content negotiation at stream clone request time checked for repository
format/requirements compatibility before initiating a stream clone. We
can't do active content negotiation when using clone bundles. So, we put
this set of requirements inside the payload so consumers have a built-in
mechanism for checking compatibility before reading and applying lots of
data. Of course, we will also advertise this requirements set in clone
bundles. But that's for another patch.

We currently don't have a mechanism to produce and consume this new
bundle format. This will be implemented in upcoming patches.

It's worth noting that if a legacy client attempts to `hg unbundle` a
stream clone bundle (with the "HGS1" header), it will abort with:
"unknown bundle version S1," which seems appropriate.

# commandserver.py - communicate with Mercurial's API over a pipe
#
#  Copyright Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from i18n import _
import struct
import sys, os, errno, traceback, SocketServer
import dispatch, encoding, util, error

logfile = None

def log(*args):
    if not logfile:
        return

    for a in args:
        logfile.write(str(a))

    logfile.flush()

class channeledoutput(object):
    """
    Write data to out in the following format:

    data length (unsigned int),
    data
    """
    def __init__(self, out, channel):
        self.out = out
        self.channel = channel

    def write(self, data):
        if not data:
            return
        self.out.write(struct.pack('>cI', self.channel, len(data)))
        self.out.write(data)
        self.out.flush()

    def __getattr__(self, attr):
        if attr in ('isatty', 'fileno'):
            raise AttributeError(attr)
        return getattr(self.out, attr)

class channeledinput(object):
    """
    Read data from in_.

    Requests for input are written to out in the following format:
    channel identifier - 'I' for plain input, 'L' line based (1 byte)
    how many bytes to send at most (unsigned int),

    The client replies with:
    data length (unsigned int), 0 meaning EOF
    data
    """

    maxchunksize = 4 * 1024

    def __init__(self, in_, out, channel):
        self.in_ = in_
        self.out = out
        self.channel = channel

    def read(self, size=-1):
        if size < 0:
            # if we need to consume all the clients input, ask for 4k chunks
            # so the pipe doesn't fill up risking a deadlock
            size = self.maxchunksize
            s = self._read(size, self.channel)
            buf = s
            while s:
                s = self._read(size, self.channel)
                buf += s

            return buf
        else:
            return self._read(size, self.channel)

    def _read(self, size, channel):
        if not size:
            return ''
        assert size > 0

        # tell the client we need at most size bytes
        self.out.write(struct.pack('>cI', channel, size))
        self.out.flush()

        length = self.in_.read(4)
        length = struct.unpack('>I', length)[0]
        if not length:
            return ''
        else:
            return self.in_.read(length)

    def readline(self, size=-1):
        if size < 0:
            size = self.maxchunksize
            s = self._read(size, 'L')
            buf = s
            # keep asking for more until there's either no more or
            # we got a full line
            while s and s[-1] != '\n':
                s = self._read(size, 'L')
                buf += s

            return buf
        else:
            return self._read(size, 'L')

    def __iter__(self):
        return self

    def next(self):
        l = self.readline()
        if not l:
            raise StopIteration
        return l

    def __getattr__(self, attr):
        if attr in ('isatty', 'fileno'):
            raise AttributeError(attr)
        return getattr(self.in_, attr)

class server(object):
    """
    Listens for commands on fin, runs them and writes the output on a channel
    based stream to fout.
    """
    def __init__(self, ui, repo, fin, fout):
        self.cwd = os.getcwd()

        # developer config: cmdserver.log
        logpath = ui.config("cmdserver", "log", None)
        if logpath:
            global logfile
            if logpath == '-':
                # write log on a special 'd' (debug) channel
                logfile = channeledoutput(fout, 'd')
            else:
                logfile = open(logpath, 'a')

        if repo:
            # the ui here is really the repo ui so take its baseui so we don't
            # end up with its local configuration
            self.ui = repo.baseui
            self.repo = repo
            self.repoui = repo.ui
        else:
            self.ui = ui
            self.repo = self.repoui = None

        self.cerr = channeledoutput(fout, 'e')
        self.cout = channeledoutput(fout, 'o')
        self.cin = channeledinput(fin, fout, 'I')
        self.cresult = channeledoutput(fout, 'r')

        self.client = fin

    def _read(self, size):
        if not size:
            return ''

        data = self.client.read(size)

        # is the other end closed?
        if not data:
            raise EOFError

        return data

    def runcommand(self):
        """ reads a list of \0 terminated arguments, executes
        and writes the return code to the result channel """

        length = struct.unpack('>I', self._read(4))[0]
        if not length:
            args = []
        else:
            args = self._read(length).split('\0')

        # copy the uis so changes (e.g. --config or --verbose) don't
        # persist between requests
        copiedui = self.ui.copy()
        uis = [copiedui]
        if self.repo:
            self.repo.baseui = copiedui
            # clone ui without using ui.copy because this is protected
            repoui = self.repoui.__class__(self.repoui)
            repoui.copy = copiedui.copy # redo copy protection
            uis.append(repoui)
            self.repo.ui = self.repo.dirstate._ui = repoui
            self.repo.invalidateall()

        for ui in uis:
            # any kind of interaction must use server channels
            ui.setconfig('ui', 'nontty', 'true', 'commandserver')

        req = dispatch.request(args[:], copiedui, self.repo, self.cin,
                               self.cout, self.cerr)

        ret = (dispatch.dispatch(req) or 0) & 255 # might return None

        # restore old cwd
        if '--cwd' in args:
            os.chdir(self.cwd)

        self.cresult.write(struct.pack('>i', int(ret)))

    def getencoding(self):
        """ writes the current encoding to the result channel """
        self.cresult.write(encoding.encoding)

    def serveone(self):
        cmd = self.client.readline()[:-1]
        if cmd:
            handler = self.capabilities.get(cmd)
            if handler:
                handler(self)
            else:
                # clients are expected to check what commands are supported by
                # looking at the servers capabilities
                raise error.Abort(_('unknown command %s') % cmd)

        return cmd != ''

    capabilities = {'runcommand'  : runcommand,
                    'getencoding' : getencoding}

    def serve(self):
        hellomsg = 'capabilities: ' + ' '.join(sorted(self.capabilities))
        hellomsg += '\n'
        hellomsg += 'encoding: ' + encoding.encoding
        hellomsg += '\n'
        hellomsg += 'pid: %d' % os.getpid()

        # write the hello msg in -one- chunk
        self.cout.write(hellomsg)

        try:
            while self.serveone():
                pass
        except EOFError:
            # we'll get here if the client disconnected while we were reading
            # its request
            return 1

        return 0

def _protectio(ui):
    """ duplicates streams and redirect original to null if ui uses stdio """
    ui.flush()
    newfiles = []
    nullfd = os.open(os.devnull, os.O_RDWR)
    for f, sysf, mode in [(ui.fin, sys.stdin, 'rb'),
                          (ui.fout, sys.stdout, 'wb')]:
        if f is sysf:
            newfd = os.dup(f.fileno())
            os.dup2(nullfd, f.fileno())
            f = os.fdopen(newfd, mode)
        newfiles.append(f)
    os.close(nullfd)
    return tuple(newfiles)

def _restoreio(ui, fin, fout):
    """ restores streams from duplicated ones """
    ui.flush()
    for f, uif in [(fin, ui.fin), (fout, ui.fout)]:
        if f is not uif:
            os.dup2(f.fileno(), uif.fileno())
            f.close()

class pipeservice(object):
    def __init__(self, ui, repo, opts):
        self.ui = ui
        self.repo = repo

    def init(self):
        pass

    def run(self):
        ui = self.ui
        # redirect stdio to null device so that broken extensions or in-process
        # hooks will never cause corruption of channel protocol.
        fin, fout = _protectio(ui)
        try:
            sv = server(ui, self.repo, fin, fout)
            return sv.serve()
        finally:
            _restoreio(ui, fin, fout)

class _requesthandler(SocketServer.StreamRequestHandler):
    def handle(self):
        ui = self.server.ui
        repo = self.server.repo
        sv = server(ui, repo, self.rfile, self.wfile)
        try:
            try:
                sv.serve()
            # handle exceptions that may be raised by command server. most of
            # known exceptions are caught by dispatch.
            except error.Abort as inst:
                ui.warn(_('abort: %s\n') % inst)
            except IOError as inst:
                if inst.errno != errno.EPIPE:
                    raise
            except KeyboardInterrupt:
                pass
        except: # re-raises
            # also write traceback to error channel. otherwise client cannot
            # see it because it is written to server's stderr by default.
            traceback.print_exc(file=sv.cerr)
            raise

class unixservice(object):
    """
    Listens on unix domain socket and forks server per connection
    """
    def __init__(self, ui, repo, opts):
        self.ui = ui
        self.repo = repo
        self.address = opts['address']
        if not util.safehasattr(SocketServer, 'UnixStreamServer'):
            raise error.Abort(_('unsupported platform'))
        if not self.address:
            raise error.Abort(_('no socket path specified with --address'))

    def init(self):
        class cls(SocketServer.ForkingMixIn, SocketServer.UnixStreamServer):
            ui = self.ui
            repo = self.repo
        self.server = cls(self.address, _requesthandler)
        self.ui.status(_('listening at %s\n') % self.address)
        self.ui.flush()  # avoid buffering of status message

    def run(self):
        try:
            self.server.serve_forever()
        finally:
            os.unlink(self.address)

_servicemap = {
    'pipe': pipeservice,
    'unix': unixservice,
    }

def createservice(ui, repo, opts):
    mode = opts['cmdserver']
    try:
        return _servicemap[mode](ui, repo, opts)
    except KeyError:
        raise error.Abort(_('unknown mode %s') % mode)