view tests/test-obsolete-checkheads.t @ 26755:bb0b955d050d

streamclone: support for producing and consuming stream clone bundles

Up to this point, stream clones only existed as a dynamically generated
data format produced and consumed during streaming clones. In order to
support this efficient cloning format with the clone bundles feature, we
need a more formal, on disk representation of the streaming clone data.

This patch introduces a new "bundle" type for streaming clones. Unlike
existing bundles, it does not contain changegroup data. It does,
however, share the same concepts like the 4 byte header which identifies
the type of data that follows and the 2 byte abbreviation for
compression types (of which only "UN" is currently supported).

The new bundle format is essentially the existing stream clone version 1
data format with some headers at the beginning.

Content negotiation at stream clone request time checked for repository
format/requirements compatibility before initiating a stream clone. We
can't do active content negotiation when using clone bundles. So, we put
this set of requirements inside the payload so consumers have a built-in
mechanism for checking compatibility before reading and applying lots of
data. Of course, we will also advertise this requirements set in clone
bundles. But that's for another patch.

We currently don't have a mechanism to produce and consume this new
bundle format. This will be implemented in upcoming patches.

It's worth noting that if a legacy client attempts to `hg unbundle` a
stream clone bundle (with the "HGS1" header), it will abort with:
"unknown bundle version S1," which seems appropriate.

Check that obsolete properly strip heads
  $ cat >> $HGRCPATH << EOF
  > [phases]
  > # public changeset are not obsolete
  > publish=false
  > [ui]
  > logtemplate='{node|short} ({phase}) {desc|firstline}\n'
  > [experimental]
  > evolution=createmarkers
  > EOF
  $ mkcommit() {
  >    echo "$1" > "$1"
  >    hg add "$1"
  >    hg ci -m "add $1"
  > }
  $ getid() {
  >    hg id --debug -ir "desc('$1')"
  > }


  $ hg init remote
  $ cd remote
  $ mkcommit base
  $ hg phase --public .
  $ cd ..
  $ cp -r remote base
  $ hg clone remote local
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local

New head replaces old head
==========================

setup
(we add the 1 flags to prevent bumped error during the test)

  $ mkcommit old
  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg up -q '.^'
  $ mkcommit new
  created new head
  $ hg debugobsolete --flags 1 `getid old` `getid new`
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  
  $ cp -r ../remote ../backup1

old exists remotely as draft. It is obsoleted by new that we now push.
Push should not warn about creating new head

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

old head is now public (public local version)
=============================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ hg -R ../remote phase --public c70b08862e08
  $ hg pull -v
  pulling from $TESTTMP/remote (glob)
  searching for changes
  no changes found
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  | o  c70b08862e08 (public) add old
  |/
  o  b4952fcf48cf (public) add base
  

Abort: old will still be an head because it's public.

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  abort: push creates new remote head 71e3228bffe1!
  (merge or see "hg help push" for details about pushing new heads)
  [255]

old head is now public (public remote version)
==============================================

TODO: Not implemented yet.

# setup
#
#   $ rm -fr ../remote
#   $ cp -r ../backup1 ../remote
#   $ hg -R ../remote phase --public c70b08862e08
#   $ hg phase --draft --force c70b08862e08
#   $ hg log -G --hidden
#   @  71e3228bffe1 (draft) add new
#   |
#   | x  c70b08862e08 (draft) add old
#   |/
#   o  b4952fcf48cf (public) add base
#
#
#
# Abort: old will still be an head because it's public.
#
#   $ hg push
#   pushing to $TESTTMP/remote
#   searching for changes
#   abort: push creates new remote head 71e3228bffe1!
#   (merge or see "hg help push" for details about pushing new heads)
#   [255]

old head is obsolete but replacement is not pushed
==================================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ hg phase --draft --force '(0::) - 0'
  $ hg up -q '.^'
  $ mkcommit other
  created new head
  $ hg log -G --hidden
  @  d7d41ccbd4de (draft) add other
  |
  | o  71e3228bffe1 (draft) add new
  |/
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  

old exists remotely as draft. It is obsoleted by new but we don't push new.
Push should abort on new head

  $ hg push -r 'desc("other")'
  pushing to $TESTTMP/remote (glob)
  searching for changes
  abort: push creates new remote head d7d41ccbd4de!
  (merge or see "hg help push" for details about pushing new heads)
  [255]



Both precursors and successors are already know remotely. Descendant adds heads
===============================================================================

setup. (The obsolete marker is known locally only

  $ cd ..
  $ rm -rf local
  $ hg clone remote local
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local
  $ mkcommit old
  old already tracked!
  nothing changed
  [1]
  $ hg up -q '.^'
  $ mkcommit new
  created new head
  $ hg push -f
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  $ mkcommit desc1
  $ hg up -q '.^'
  $ mkcommit desc2
  created new head
  $ hg debugobsolete `getid old` `getid new`
  $ hg log -G --hidden
  @  5fe37041cc2b (draft) add desc2
  |
  | o  a3ef1d111c5f (draft) add desc1
  |/
  o  71e3228bffe1 (draft) add new
  |
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  
  $ hg log -G --hidden -R ../remote
  o  71e3228bffe1 (draft) add new
  |
  | o  c70b08862e08 (draft) add old
  |/
  @  b4952fcf48cf (public) add base
  
  $ cp -r ../remote ../backup2

Push should not warn about adding new heads. We create one, but we'll delete
one anyway.

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)


Remote head is unknown but obsoleted by a local changeset
=========================================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ cd ..
  $ rm -rf local
  $ hg clone remote local -r 0
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local
  $ mkcommit new
  $ hg -R ../remote id --debug -r tip
  c70b08862e0838ea6d7c59c85da2f1ed6c8d67da tip
  $ hg  id --debug -r tip
  71e3228bffe1886550777233d6c97bb5a6b2a650 tip
  $ hg debugobsolete c70b08862e0838ea6d7c59c85da2f1ed6c8d67da 71e3228bffe1886550777233d6c97bb5a6b2a650
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  o  b4952fcf48cf (public) add base
  
  $ hg log -G --hidden -R ../remote
  o  c70b08862e08 (draft) add old
  |
  @  b4952fcf48cf (public) add base
  

Push should not complain about new heads.

  $ hg push --traceback
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)