view tests/test-treediscovery.t @ 26755:bb0b955d050d

streamclone: support for producing and consuming stream clone bundles

Up to this point, stream clones only existed as a dynamically generated
data format produced and consumed during streaming clones. In order to
support this efficient cloning format with the clone bundles feature, we
need a more formal, on disk representation of the streaming clone data.

This patch introduces a new "bundle" type for streaming clones. Unlike
existing bundles, it does not contain changegroup data. It does,
however, share the same concepts like the 4 byte header which identifies
the type of data that follows and the 2 byte abbreviation for
compression types (of which only "UN" is currently supported).

The new bundle format is essentially the existing stream clone version 1
data format with some headers at the beginning.

Content negotiation at stream clone request time checked for repository
format/requirements compatibility before initiating a stream clone. We
can't do active content negotiation when using clone bundles. So, we put
this set of requirements inside the payload so consumers have a built-in
mechanism for checking compatibility before reading and applying lots of
data. Of course, we will also advertise this requirements set in clone
bundles. But that's for another patch.

We currently don't have a mechanism to produce and consume this new
bundle format. This will be implemented in upcoming patches.

It's worth noting that if a legacy client attempts to `hg unbundle` a
stream clone bundle (with the "HGS1" header), it will abort with:
"unknown bundle version S1," which seems appropriate.

#require killdaemons

Tests discovery against servers without getbundle support:

  $ CAP="getbundle bundle2"
  $ . "$TESTDIR/notcapable"
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > logtemplate="{rev} {node|short}: {desc} {branches}\n"
  > EOF

Setup HTTP server control:

  $ remote=http://localhost:$HGPORT/
  $ export remote
  $ tstart() {
  >   echo '[web]' > $1/.hg/hgrc
  >   echo 'push_ssl = false' >> $1/.hg/hgrc
  >   echo 'allow_push = *' >> $1/.hg/hgrc
  >   hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -A access.log -E errors.log
  >   cat hg.pid >> $DAEMON_PIDS
  > }
  $ tstop() {
  >   killdaemons.py
  >   [ "$1" ] && cut -d' ' -f6- access.log && cat errors.log
  >   rm access.log errors.log
  > }

Both are empty:

  $ hg init empty1
  $ hg init empty2
  $ tstart empty2
  $ hg incoming -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg outgoing -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull -R empty1 $remote
  pulling from http://localhost:$HGPORT/
  no changes found
  $ hg push -R empty1 $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ tstop

Base repo:

  $ hg init main
  $ cd main
  $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
  $ hg log -G
  o  11 a19bfa7e7328: r11 both
  |
  o  10 8b6bad1512e1: r10 both
  |
  o    9 025829e08038: r9 both
  |\
  | o  8 d8f638ac69e9: r8 name2
  | |
  | o  7 b6b4d315a2ac: r7 name2
  | |
  | o  6 6c6f5d5f3c11: r6 name2
  | |
  | o  5 70314b29987d: r5 name2
  | |
  o |  4 e71dbbc70e03: r4 name1
  | |
  o |  3 2c8d5d5ec612: r3 name1
  | |
  o |  2 a7892891da29: r2 name1
  |/
  o  1 0019a3b924fd: r1
  |
  o  0 d57206cc072a: r0
  
  $ cd ..
  $ tstart main

Full clone:

  $ hg clone main full
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd full
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is empty:

  $ cd empty1
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 12 changesets with 24 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is subset:

  $ hg clone main subset --rev name2 ; cd subset
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Remote is empty:

  $ tstart empty2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 12 changesets with 24 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Local is superset:

  $ hg clone main subset2 --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ tstart subset2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: push creates new remote branches: both, name1!
  (use 'hg push --new-branch' to create new remote branches)
  [255]
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 6 changesets with 12 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Partial pull:

  $ tstart main
  $ hg clone $remote partial --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd partial
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg incoming $remote --rev name1
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg pull $remote --rev name1
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ cd ..
  $ tstop

Both have new stuff in new named branches:

  $ hg clone main repo1a --rev name1 -q
  $ hg clone repo1a repo1b -q
  $ hg clone main repo2a --rev name2 -q
  $ hg clone repo2a repo2b -q
  $ tstart repo1a

  $ cd repo2a
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 70314b29987d: r5 name2
  3 6c6f5d5f3c11: r6 name2
  4 b6b4d315a2ac: r7 name2
  5 d8f638ac69e9: r8 name2
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 8 changes to 2 files (+1 heads)
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

  $ tstart repo1b
  $ cd repo2b
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 70314b29987d: r5 name2
  3 6c6f5d5f3c11: r6 name2
  4 b6b4d315a2ac: r7 name2
  5 d8f638ac69e9: r8 name2
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 6 changes to 2 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 4 changesets with 8 changes to 2 files (+1 heads)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

Both have new stuff in existing named branches:

  $ rm -r repo1a repo1b repo2a repo2b
  $ hg clone main repo1a --rev 3 --rev 8 -q
  $ hg clone repo1a repo1b -q
  $ hg clone main repo2a --rev 4 --rev 7 -q
  $ hg clone repo2a repo2b -q
  $ tstart repo1a

  $ cd repo2a
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  8 d8f638ac69e9: r8 name2
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  4 e71dbbc70e03: r4 name1
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 2 changes to 2 files
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop

  $ tstart repo1b
  $ cd repo2b
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  8 d8f638ac69e9: r8 name2
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  4 e71dbbc70e03: r4 name1
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 2 changes to 2 files
  (run 'hg update' to get a working copy)
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 2 changes to 2 files
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..
  $ tstop show
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=branches HTTP/1.1" 200 - x-hgarg-1:nodes=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=between HTTP/1.1" 200 - x-hgarg-1:pairs=d8f638ac69e9ae8dea4f09f11d696546a912d961-d57206cc072a18317c1e381fb60aa31bd3401785
  "GET /?cmd=changegroupsubset HTTP/1.1" 200 - x-hgarg-1:bases=d8f638ac69e9ae8dea4f09f11d696546a912d961&heads=d8f638ac69e9ae8dea4f09f11d696546a912d961
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=branchmap HTTP/1.1" 200 -
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks
  "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+1827a5bb63e602382eb89dd58f2ac9f3b007ad91
  "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -
  "GET /?cmd=capabilities HTTP/1.1" 200 -
  "GET /?cmd=heads HTTP/1.1" 200 -