abort: added logic for of hg abort
This is part of `GSoC19` project `Implement abort and
continue commands`. This patch is part of the `abort plan`.
This adds the basic logic for `hg abort`. This command
aborts an multistep operation like graft, histedit, rebase,
merge and unshelve if they are in an unfinished state.
The first part of the logic is determining the unfinished
operation from the state detection API under `statemod`.
This API is extended to support `hg abort` by adding a method
to register the abort logic as a function (here `abortfunc`).
Once the unfinished operation is determined the registered
logic is used to abort the command. The benefit of this kind
of framework is that any new extension developed can support
`hg abort` by registering the command and logic under
statedetection API.
`hg abort` currently supports `--dry-run/-n` flag only.
It is used to dry run `hg abort`
Further patches sequentially add support for `graft`, `rebase`,
`unshelve`, `histedit` and `merge`.
Differential Revision: https://phab.mercurial-scm.org/D6566
test sparse
$ hg init myrepo
$ cd myrepo
$ cat > .hg/hgrc <<EOF
> [extensions]
> sparse=
> strip=
> EOF
$ echo a > show
$ echo x > hide
$ hg ci -Aqm 'initial'
$ echo b > show
$ echo y > hide
$ echo aa > show2
$ echo xx > hide2
$ hg ci -Aqm 'two'
Verify basic --include
$ hg up -q 0
$ hg debugsparse --include 'hide'
$ ls
hide
Absolute paths outside the repo should just be rejected
#if no-windows
$ hg debugsparse --include /foo/bar
abort: paths cannot be absolute
[255]
$ hg debugsparse --include '$TESTTMP/myrepo/hide'
$ hg debugsparse --include '/root'
abort: paths cannot be absolute
[255]
#else
TODO: See if this can be made to fail the same way as on Unix
$ hg debugsparse --include /c/foo/bar
abort: paths cannot be absolute
[255]
$ hg debugsparse --include '$TESTTMP/myrepo/hide'
$ hg debugsparse --include '/c/root'
abort: paths cannot be absolute
[255]
#endif
Paths should be treated as cwd-relative, not repo-root-relative
$ mkdir subdir && cd subdir
$ hg debugsparse --include path
$ hg debugsparse
[include]
$TESTTMP/myrepo/hide
hide
subdir/path
$ cd ..
$ echo hello > subdir/file2.ext
$ cd subdir
$ hg debugsparse --include '**.ext' # let us test globs
$ hg debugsparse --include 'path:abspath' # and a path: pattern
$ cd ..
$ hg debugsparse
[include]
$TESTTMP/myrepo/hide
hide
path:abspath
subdir/**.ext
subdir/path
$ rm -rf subdir
Verify commiting while sparse includes other files
$ echo z > hide
$ hg ci -Aqm 'edit hide'
$ ls
hide
$ hg manifest
hide
show
Verify --reset brings files back
$ hg debugsparse --reset
$ ls
hide
show
$ cat hide
z
$ cat show
a
Verify 'hg debugsparse' default output
$ hg up -q null
$ hg debugsparse --include 'show*'
$ hg debugsparse
[include]
show*
Verify update only writes included files
$ hg up -q 0
$ ls
show
$ hg up -q 1
$ ls
show
show2
Verify status only shows included files
$ touch hide
$ touch hide3
$ echo c > show
$ hg status
M show
Adding an excluded file should fail
$ hg add hide3
abort: cannot add 'hide3' - it is outside the sparse checkout
(include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
[255]
But adding a truly excluded file shouldn't count
$ hg add hide3 -X hide3
Verify deleting sparseness while a file has changes fails
$ hg debugsparse --delete 'show*'
pending changes to 'hide'
abort: cannot change sparseness due to pending changes (delete the files or use --force to bring them back dirty)
[255]
Verify deleting sparseness with --force brings back files
$ hg debugsparse --delete -f 'show*'
pending changes to 'hide'
$ ls
hide
hide2
hide3
show
show2
$ hg st
M hide
M show
? hide3
Verify editing sparseness fails if pending changes
$ hg debugsparse --include 'show*'
pending changes to 'hide'
abort: could not update sparseness due to pending changes
[255]
Verify adding sparseness hides files
$ hg debugsparse --exclude -f 'hide*'
pending changes to 'hide'
$ ls
hide
hide3
show
show2
$ hg st
M show
$ hg up -qC .
TODO: add an option to purge to also purge files outside the sparse config?
$ hg purge --all --config extensions.purge=
$ ls
hide
hide3
show
show2
For now, manually remove the files
$ rm hide hide3
Verify rebase temporarily includes excluded files
$ hg rebase -d 1 -r 2 --config extensions.rebase=
rebasing 2:b91df4f39e75 "edit hide" (tip)
temporarily included 2 file(s) in the sparse checkout for merging
merging hide
warning: conflicts while merging hide! (edit, then use 'hg resolve --mark')
unresolved conflicts (see hg resolve, then hg rebase --continue)
[1]
$ hg debugsparse
[exclude]
hide*
Temporarily Included Files (for merge/rebase):
hide
$ cat hide
<<<<<<< dest: 39278f7c08a9 - test: two
y
=======
z
>>>>>>> source: b91df4f39e75 - test: edit hide
Verify aborting a rebase cleans up temporary files
$ hg rebase --abort --config extensions.rebase=
cleaned up 1 temporarily added file(s) from the sparse checkout
rebase aborted
$ rm hide.orig
$ ls
show
show2
Verify merge fails if merging excluded files
$ hg up -q 1
$ hg merge -r 2
temporarily included 2 file(s) in the sparse checkout for merging
merging hide
warning: conflicts while merging hide! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg debugsparse
[exclude]
hide*
Temporarily Included Files (for merge/rebase):
hide
$ hg up -C .
cleaned up 1 temporarily added file(s) from the sparse checkout
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugsparse
[exclude]
hide*
Verify strip -k resets dirstate correctly
$ hg status
$ hg debugsparse
[exclude]
hide*
$ hg log -r . -T '{rev}\n' --stat
1
hide | 2 +-
hide2 | 1 +
show | 2 +-
show2 | 1 +
4 files changed, 4 insertions(+), 2 deletions(-)
$ hg strip -r . -k
saved backup bundle to $TESTTMP/myrepo/.hg/strip-backup/39278f7c08a9-ce59e002-backup.hg
$ hg status
M show
? show2
Verify rebase succeeds if all changed files are in sparse checkout
$ hg commit -Aqm "add show2"
$ hg rebase -d 1 --config extensions.rebase=
rebasing 2:bdde55290160 "add show2" (tip)
saved backup bundle to $TESTTMP/myrepo/.hg/strip-backup/bdde55290160-216ed9c6-rebase.hg
Verify log --sparse only shows commits that affect the sparse checkout
$ hg log -T '{rev} '
2 1 0 (no-eol)
$ hg log --sparse -T '{rev} '
2 0 (no-eol)
Test status on a file in a subdir
$ mkdir -p dir1/dir2
$ touch dir1/dir2/file
$ hg debugsparse -I dir1/dir2
$ hg status
? dir1/dir2/file
Mix files and subdirectories, both "glob:" and unprefixed
$ hg debugsparse --reset
$ touch dir1/notshown
$ hg commit -A dir1/notshown -m "notshown"
$ hg debugsparse --include 'dir1/dir2'
$ "$PYTHON" $TESTDIR/list-tree.py . | egrep -v '\.[\/]\.hg'
./
./dir1/
./dir1/dir2/
./dir1/dir2/file
./hide.orig
$ hg debugsparse --delete 'dir1/dir2'
$ hg debugsparse --include 'glob:dir1/dir2'
$ "$PYTHON" $TESTDIR/list-tree.py . | egrep -v '\.[\/]\.hg'
./
./dir1/
./dir1/dir2/
./dir1/dir2/file
./hide.orig
Test that add -s adds dirs to sparse profile
$ hg debugsparse --reset
$ hg debugsparse --include empty
$ hg debugsparse
[include]
empty
$ mkdir add
$ touch add/foo
$ touch add/bar
$ hg add add/foo
abort: cannot add 'add/foo' - it is outside the sparse checkout
(include file with `hg debugsparse --include <pattern>` or use `hg add -s <file>` to include file directory while adding)
[255]
$ hg add -s add/foo
$ hg st
A add/foo
? add/bar
$ hg debugsparse
[include]
add
empty
$ hg add -s add/*
add/foo already tracked!
$ hg st
A add/bar
A add/foo
$ hg debugsparse
[include]
add
empty
$ cd ..
Test non-sparse repos work while sparse is loaded
$ hg init sparserepo
$ hg init nonsparserepo
$ cd sparserepo
$ cat > .hg/hgrc <<EOF
> [extensions]
> sparse=
> EOF
$ cd ../nonsparserepo
$ echo x > x && hg add x && hg commit -qAm x
$ cd ../sparserepo
$ hg clone ../nonsparserepo ../nonsparserepo2
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Test debugrebuilddirstate
$ cd ../sparserepo
$ touch included
$ touch excluded
$ hg add included excluded
$ hg commit -m 'a commit' -q
$ cp .hg/dirstate ../dirstateboth
$ hg debugsparse -X excluded
$ cp ../dirstateboth .hg/dirstate
$ hg debugrebuilddirstate
$ hg debugdirstate
n 0 -1 unset included
Test debugdirstate --minimal where file is in the parent manifest but not the
dirstate
$ hg debugsparse -X included
$ hg debugdirstate
$ cp .hg/dirstate ../dirstateallexcluded
$ hg debugsparse --reset
$ hg debugsparse -X excluded
$ cp ../dirstateallexcluded .hg/dirstate
$ touch includedadded
$ hg add includedadded
$ hg debugdirstate --no-dates
a 0 -1 unset includedadded
$ hg debugrebuilddirstate --minimal
$ hg debugdirstate --no-dates
n 0 -1 unset included
a 0 -1 * includedadded (glob)
Test debugdirstate --minimal where a file is not in parent manifest
but in the dirstate. This should take into account excluded files in the
manifest
$ cp ../dirstateboth .hg/dirstate
$ touch includedadded
$ hg add includedadded
$ touch excludednomanifest
$ hg add excludednomanifest
$ cp .hg/dirstate ../moreexcluded
$ hg forget excludednomanifest
$ rm excludednomanifest
$ hg debugsparse -X excludednomanifest
$ cp ../moreexcluded .hg/dirstate
$ hg manifest
excluded
included
We have files in the dirstate that are included and excluded. Some are in the
manifest and some are not.
$ hg debugdirstate --no-dates
n 644 0 * excluded (glob)
a 0 -1 * excludednomanifest (glob)
n 644 0 * included (glob)
a 0 -1 * includedadded (glob)
$ hg debugrebuilddirstate --minimal
$ hg debugdirstate --no-dates
n 644 0 * included (glob)
a 0 -1 * includedadded (glob)