# histedit.py - interactive history editing for mercurial
#
# Copyright 2009 Augie Fackler <raf@durin42.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""interactive history editing
With this extension installed, Mercurial gains one new command: histedit. Usage
is as follows, assuming the following history::
@ 3[tip] 7c2fd3b9020c 2009-04-27 18:04 -0500 durin42
| Add delta
|
o 2 030b686bedc4 2009-04-27 18:04 -0500 durin42
| Add gamma
|
o 1 c561b4e977df 2009-04-27 18:04 -0500 durin42
| Add beta
|
o 0 d8d2fcd0e319 2009-04-27 18:04 -0500 durin42
Add alpha
If you were to run ``hg histedit c561b4e977df``, you would see the following
file open in your editor::
pick c561b4e977df Add beta
pick 030b686bedc4 Add gamma
pick 7c2fd3b9020c Add delta
# Edit history between c561b4e977df and 7c2fd3b9020c
#
# Commits are listed from least to most recent
#
# Commands:
# p, pick = use commit
# e, edit = use commit, but stop for amending
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description and date
# d, drop = remove commit from history
# m, mess = edit commit message without changing commit content
#
In this file, lines beginning with ``#`` are ignored. You must specify a rule
for each revision in your history. For example, if you had meant to add gamma
before beta, and then wanted to add delta in the same revision as beta, you
would reorganize the file to look like this::
pick 030b686bedc4 Add gamma
pick c561b4e977df Add beta
fold 7c2fd3b9020c Add delta
# Edit history between c561b4e977df and 7c2fd3b9020c
#
# Commits are listed from least to most recent
#
# Commands:
# p, pick = use commit
# e, edit = use commit, but stop for amending
# f, fold = use commit, but combine it with the one above
# r, roll = like fold, but discard this commit's description and date
# d, drop = remove commit from history
# m, mess = edit commit message without changing commit content
#
At which point you close the editor and ``histedit`` starts working. When you
specify a ``fold`` operation, ``histedit`` will open an editor when it folds
those revisions together, offering you a chance to clean up the commit message::
Add beta
***
Add delta
Edit the commit message to your liking, then close the editor. The date used
for the commit will be the later of the two commits' dates. For this example,
let's assume that the commit message was changed to ``Add beta and delta.``
After histedit has run and had a chance to remove any old or temporary
revisions it needed, the history looks like this::
@ 2[tip] 989b4d060121 2009-04-27 18:04 -0500 durin42
| Add beta and delta.
|
o 1 081603921c3f 2009-04-27 18:04 -0500 durin42
| Add gamma
|
o 0 d8d2fcd0e319 2009-04-27 18:04 -0500 durin42
Add alpha
Note that ``histedit`` does *not* remove any revisions (even its own temporary
ones) until after it has completed all the editing operations, so it will
probably perform several strip operations when it's done. For the above example,
it had to run strip twice. Strip can be slow depending on a variety of factors,
so you might need to be a little patient. You can choose to keep the original
revisions by passing the ``--keep`` flag.
The ``edit`` operation will drop you back to a command prompt,
allowing you to edit files freely, or even use ``hg record`` to commit
some changes as a separate commit. When you're done, any remaining
uncommitted changes will be committed as well. When done, run ``hg
histedit --continue`` to finish this step. If there are uncommitted
changes, you'll be prompted for a new commit message, but the default
commit message will be the original message for the ``edit`` ed
revision, and the date of the original commit will be preserved.
The ``message`` operation will give you a chance to revise a commit
message without changing the contents. It's a shortcut for doing
``edit`` immediately followed by `hg histedit --continue``.
If ``histedit`` encounters a conflict when moving a revision (while
handling ``pick`` or ``fold``), it'll stop in a similar manner to
``edit`` with the difference that it won't prompt you for a commit
message when done. If you decide at this point that you don't like how
much work it will be to rearrange history, or that you made a mistake,
you can use ``hg histedit --abort`` to abandon the new changes you
have made and return to the state before you attempted to edit your
history.
If we clone the histedit-ed example repository above and add four more
changes, such that we have the following history::
@ 6[tip] 038383181893 2009-04-27 18:04 -0500 stefan
| Add theta
|
o 5 140988835471 2009-04-27 18:04 -0500 stefan
| Add eta
|
o 4 122930637314 2009-04-27 18:04 -0500 stefan
| Add zeta
|
o 3 836302820282 2009-04-27 18:04 -0500 stefan
| Add epsilon
|
o 2 989b4d060121 2009-04-27 18:04 -0500 durin42
| Add beta and delta.
|
o 1 081603921c3f 2009-04-27 18:04 -0500 durin42
| Add gamma
|
o 0 d8d2fcd0e319 2009-04-27 18:04 -0500 durin42
Add alpha
If you run ``hg histedit --outgoing`` on the clone then it is the same
as running ``hg histedit 836302820282``. If you need plan to push to a
repository that Mercurial does not detect to be related to the source
repo, you can add a ``--force`` option.
Config
------
Histedit rule lines are truncated to 80 characters by default. You
can customize this behavior by setting a different length in your
configuration file::
[histedit]
linelen = 120 # truncate rule lines at 120 characters
``hg histedit`` attempts to automatically choose an appropriate base
revision to use. To change which base revision is used, define a
revset in your configuration file::
[histedit]
defaultrev = only(.) & draft()
By default each edited revision needs to be present in histedit commands.
To remove revision you need to use ``drop`` operation. You can configure
the drop to be implicit for missing commits by adding::
[histedit]
dropmissing = True
By default, histedit will close the transaction after each action. For
performance purposes, you can configure histedit to use a single transaction
across the entire histedit. WARNING: This setting introduces a significant risk
of losing the work you've done in a histedit if the histedit aborts
unexpectedly::
[histedit]
singletransaction = True
"""
from __future__ import absolute_import
import errno
import os
from mercurial.i18n import _
from mercurial import (
bundle2,
cmdutil,
context,
copies,
destutil,
discovery,
error,
exchange,
extensions,
hg,
lock,
merge as mergemod,
mergeutil,
node,
obsolete,
registrar,
repair,
scmutil,
util,
)
pickle = util.pickle
release = lock.release
cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
actiontable = {}
primaryactions = set()
secondaryactions = set()
tertiaryactions = set()
internalactions = set()
def geteditcomment(ui, first, last):
""" construct the editor comment
The comment includes::
- an intro
- sorted primary commands
- sorted short commands
- sorted long commands
- additional hints
Commands are only included once.
"""
intro = _("""Edit history between %s and %s
Commits are listed from least to most recent
You can reorder changesets by reordering the lines
Commands:
""")
actions = []
def addverb(v):
a = actiontable[v]
lines = a.message.split("\n")
if len(a.verbs):
v = ', '.join(sorted(a.verbs, key=lambda v: len(v)))
actions.append(" %s = %s" % (v, lines[0]))
actions.extend([' %s' for l in lines[1:]])
for v in (
sorted(primaryactions) +
sorted(secondaryactions) +
sorted(tertiaryactions)
):
addverb(v)
actions.append('')
hints = []
if ui.configbool('histedit', 'dropmissing'):
hints.append("Deleting a changeset from the list "
"will DISCARD it from the edited history!")
lines = (intro % (first, last)).split('\n') + actions + hints
return ''.join(['# %s\n' % l if l else '#\n' for l in lines])
class histeditstate(object):
def __init__(self, repo, parentctxnode=None, actions=None, keep=None,
topmost=None, replacements=None, lock=None, wlock=None):
self.repo = repo
self.actions = actions
self.keep = keep
self.topmost = topmost
self.parentctxnode = parentctxnode
self.lock = lock
self.wlock = wlock
self.backupfile = None
self.tr = None
if replacements is None:
self.replacements = []
else:
self.replacements = replacements
def read(self):
"""Load histedit state from disk and set fields appropriately."""
try:
state = self.repo.vfs.read('histedit-state')
except IOError as err:
if err.errno != errno.ENOENT:
raise
cmdutil.wrongtooltocontinue(self.repo, _('histedit'))
if state.startswith('v1\n'):
data = self._load()
parentctxnode, rules, keep, topmost, replacements, backupfile = data
else:
data = pickle.loads(state)
parentctxnode, rules, keep, topmost, replacements = data
backupfile = None
self.parentctxnode = parentctxnode
rules = "\n".join(["%s %s" % (verb, rest) for [verb, rest] in rules])
actions = parserules(rules, self)
self.actions = actions
self.keep = keep
self.topmost = topmost
self.replacements = replacements
self.backupfile = backupfile
def write(self, tr=None):
if tr:
tr.addfilegenerator('histedit-state', ('histedit-state',),
self._write, location='plain')
else:
with self.repo.vfs("histedit-state", "w") as f:
self._write(f)
def _write(self, fp):
fp.write('v1\n')
fp.write('%s\n' % node.hex(self.parentctxnode))
fp.write('%s\n' % node.hex(self.topmost))
fp.write('%s\n' % self.keep)
fp.write('%d\n' % len(self.actions))
for action in self.actions:
fp.write('%s\n' % action.tostate())
fp.write('%d\n' % len(self.replacements))
for replacement in self.replacements:
fp.write('%s%s\n' % (node.hex(replacement[0]), ''.join(node.hex(r)
for r in replacement[1])))
backupfile = self.backupfile
if not backupfile:
backupfile = ''
fp.write('%s\n' % backupfile)
def _load(self):
fp = self.repo.vfs('histedit-state', 'r')
lines = [l[:-1] for l in fp.readlines()]
index = 0
lines[index] # version number
index += 1
parentctxnode = node.bin(lines[index])
index += 1
topmost = node.bin(lines[index])
index += 1
keep = lines[index] == 'True'
index += 1
# Rules
rules = []
rulelen = int(lines[index])
index += 1
for i in xrange(rulelen):
ruleaction = lines[index]
index += 1
rule = lines[index]
index += 1
rules.append((ruleaction, rule))
# Replacements
replacements = []
replacementlen = int(lines[index])
index += 1
for i in xrange(replacementlen):
replacement = lines[index]
original = node.bin(replacement[:40])
succ = [node.bin(replacement[i:i + 40]) for i in
range(40, len(replacement), 40)]
replacements.append((original, succ))
index += 1
backupfile = lines[index]
index += 1
fp.close()
return parentctxnode, rules, keep, topmost, replacements, backupfile
def clear(self):
if self.inprogress():
self.repo.vfs.unlink('histedit-state')
def inprogress(self):
return self.repo.vfs.exists('histedit-state')
class histeditaction(object):
def __init__(self, state, node):
self.state = state
self.repo = state.repo
self.node = node
@classmethod
def fromrule(cls, state, rule):
"""Parses the given rule, returning an instance of the histeditaction.
"""
rulehash = rule.strip().split(' ', 1)[0]
try:
rev = node.bin(rulehash)
except TypeError:
raise error.ParseError("invalid changeset %s" % rulehash)
return cls(state, rev)
def verify(self, prev, expected, seen):
""" Verifies semantic correctness of the rule"""
repo = self.repo
ha = node.hex(self.node)
try:
self.node = repo[ha].node()
except error.RepoError:
raise error.ParseError(_('unknown changeset %s listed')
% ha[:12])
if self.node is not None:
self._verifynodeconstraints(prev, expected, seen)
def _verifynodeconstraints(self, prev, expected, seen):
# by default command need a node in the edited list
if self.node not in expected:
raise error.ParseError(_('%s "%s" changeset was not a candidate')
% (self.verb, node.short(self.node)),
hint=_('only use listed changesets'))
# and only one command per node
if self.node in seen:
raise error.ParseError(_('duplicated command for changeset %s') %
node.short(self.node))
def torule(self):
"""build a histedit rule line for an action
by default lines are in the form:
<hash> <rev> <summary>
"""
ctx = self.repo[self.node]
summary = _getsummary(ctx)
line = '%s %s %d %s' % (self.verb, ctx, ctx.rev(), summary)
# trim to 75 columns by default so it's not stupidly wide in my editor
# (the 5 more are left for verb)
maxlen = self.repo.ui.configint('histedit', 'linelen', default=80)
maxlen = max(maxlen, 22) # avoid truncating hash
return util.ellipsis(line, maxlen)
def tostate(self):
"""Print an action in format used by histedit state files
(the first line is a verb, the remainder is the second)
"""
return "%s\n%s" % (self.verb, node.hex(self.node))
def run(self):
"""Runs the action. The default behavior is simply apply the action's
rulectx onto the current parentctx."""
self.applychange()
self.continuedirty()
return self.continueclean()
def applychange(self):
"""Applies the changes from this action's rulectx onto the current
parentctx, but does not commit them."""
repo = self.repo
rulectx = repo[self.node]
repo.ui.pushbuffer(error=True, labeled=True)
hg.update(repo, self.state.parentctxnode, quietempty=True)
stats = applychanges(repo.ui, repo, rulectx, {})
if stats and stats[3] > 0:
buf = repo.ui.popbuffer()
repo.ui.write(*buf)
raise error.InterventionRequired(
_('Fix up the change (%s %s)') %
(self.verb, node.short(self.node)),
hint=_('hg histedit --continue to resume'))
else:
repo.ui.popbuffer()
def continuedirty(self):
"""Continues the action when changes have been applied to the working
copy. The default behavior is to commit the dirty changes."""
repo = self.repo
rulectx = repo[self.node]
editor = self.commiteditor()
commit = commitfuncfor(repo, rulectx)
commit(text=rulectx.description(), user=rulectx.user(),
date=rulectx.date(), extra=rulectx.extra(), editor=editor)
def commiteditor(self):
"""The editor to be used to edit the commit message."""
return False
def continueclean(self):
"""Continues the action when the working copy is clean. The default
behavior is to accept the current commit as the new version of the
rulectx."""
ctx = self.repo['.']
if ctx.node() == self.state.parentctxnode:
self.repo.ui.warn(_('%s: skipping changeset (no changes)\n') %
node.short(self.node))
return ctx, [(self.node, tuple())]
if ctx.node() == self.node:
# Nothing changed
return ctx, []
return ctx, [(self.node, (ctx.node(),))]
def commitfuncfor(repo, src):
"""Build a commit function for the replacement of <src>
This function ensure we apply the same treatment to all changesets.
- Add a 'histedit_source' entry in extra.
Note that fold has its own separated logic because its handling is a bit
different and not easily factored out of the fold method.
"""
phasemin = src.phase()
def commitfunc(**kwargs):
overrides = {('phases', 'new-commit'): phasemin}
with repo.ui.configoverride(overrides, 'histedit'):
extra = kwargs.get('extra', {}).copy()
extra['histedit_source'] = src.hex()
kwargs['extra'] = extra
return repo.commit(**kwargs)
return commitfunc
def applychanges(ui, repo, ctx, opts):
"""Merge changeset from ctx (only) in the current working directory"""
wcpar = repo.dirstate.parents()[0]
if ctx.p1().node() == wcpar:
# edits are "in place" we do not need to make any merge,
# just applies changes on parent for editing
cmdutil.revert(ui, repo, ctx, (wcpar, node.nullid), all=True)
stats = None
else:
try:
# ui.forcemerge is an internal variable, do not document
repo.ui.setconfig('ui', 'forcemerge', opts.get('tool', ''),
'histedit')
stats = mergemod.graft(repo, ctx, ctx.p1(), ['local', 'histedit'])
finally:
repo.ui.setconfig('ui', 'forcemerge', '', 'histedit')
return stats
def collapse(repo, first, last, commitopts, skipprompt=False):
"""collapse the set of revisions from first to last as new one.
Expected commit options are:
- message
- date
- username
Commit message is edited in all cases.
This function works in memory."""
ctxs = list(repo.set('%d::%d', first, last))
if not ctxs:
return None
for c in ctxs:
if not c.mutable():
raise error.ParseError(
_("cannot fold into public change %s") % node.short(c.node()))
base = first.parents()[0]
# commit a new version of the old changeset, including the update
# collect all files which might be affected
files = set()
for ctx in ctxs:
files.update(ctx.files())
# Recompute copies (avoid recording a -> b -> a)
copied = copies.pathcopies(base, last)
# prune files which were reverted by the updates
files = [f for f in files if not cmdutil.samefile(f, last, base)]
# commit version of these files as defined by head
headmf = last.manifest()
def filectxfn(repo, ctx, path):
if path in headmf:
fctx = last[path]
flags = fctx.flags()
mctx = context.memfilectx(repo,
fctx.path(), fctx.data(),
islink='l' in flags,
isexec='x' in flags,
copied=copied.get(path))
return mctx
return None
if commitopts.get('message'):
message = commitopts['message']
else:
message = first.description()
user = commitopts.get('user')
date = commitopts.get('date')
extra = commitopts.get('extra')
parents = (first.p1().node(), first.p2().node())
editor = None
if not skipprompt:
editor = cmdutil.getcommiteditor(edit=True, editform='histedit.fold')
new = context.memctx(repo,
parents=parents,
text=message,
files=files,
filectxfn=filectxfn,
user=user,
date=date,
extra=extra,
editor=editor)
return repo.commitctx(new)
def _isdirtywc(repo):
return repo[None].dirty(missing=True)
def abortdirty():
raise error.Abort(_('working copy has pending changes'),
hint=_('amend, commit, or revert them and run histedit '
'--continue, or abort with histedit --abort'))
def action(verbs, message, priority=False, internal=False):
def wrap(cls):
assert not priority or not internal
verb = verbs[0]
if priority:
primaryactions.add(verb)
elif internal:
internalactions.add(verb)
elif len(verbs) > 1:
secondaryactions.add(verb)
else:
tertiaryactions.add(verb)
cls.verb = verb
cls.verbs = verbs
cls.message = message
for verb in verbs:
actiontable[verb] = cls
return cls
return wrap
@action(['pick', 'p'],
_('use commit'),
priority=True)
class pick(histeditaction):
def run(self):
rulectx = self.repo[self.node]
if rulectx.parents()[0].node() == self.state.parentctxnode:
self.repo.ui.debug('node %s unchanged\n' % node.short(self.node))
return rulectx, []
return super(pick, self).run()
@action(['edit', 'e'],
_('use commit, but stop for amending'),
priority=True)
class edit(histeditaction):
def run(self):
repo = self.repo
rulectx = repo[self.node]
hg.update(repo, self.state.parentctxnode, quietempty=True)
applychanges(repo.ui, repo, rulectx, {})
raise error.InterventionRequired(
_('Editing (%s), you may commit or record as needed now.')
% node.short(self.node),
hint=_('hg histedit --continue to resume'))
def commiteditor(self):
return cmdutil.getcommiteditor(edit=True, editform='histedit.edit')
@action(['fold', 'f'],
_('use commit, but combine it with the one above'))
class fold(histeditaction):
def verify(self, prev, expected, seen):
""" Verifies semantic correctness of the fold rule"""
super(fold, self).verify(prev, expected, seen)
repo = self.repo
if not prev:
c = repo[self.node].parents()[0]
elif not prev.verb in ('pick', 'base'):
return
else:
c = repo[prev.node]
if not c.mutable():
raise error.ParseError(
_("cannot fold into public change %s") % node.short(c.node()))
def continuedirty(self):
repo = self.repo
rulectx = repo[self.node]
commit = commitfuncfor(repo, rulectx)
commit(text='fold-temp-revision %s' % node.short(self.node),
user=rulectx.user(), date=rulectx.date(),
extra=rulectx.extra())
def continueclean(self):
repo = self.repo
ctx = repo['.']
rulectx = repo[self.node]
parentctxnode = self.state.parentctxnode
if ctx.node() == parentctxnode:
repo.ui.warn(_('%s: empty changeset\n') %
node.short(self.node))
return ctx, [(self.node, (parentctxnode,))]
parentctx = repo[parentctxnode]
newcommits = set(c.node() for c in repo.set('(%d::. - %d)', parentctx,
parentctx))
if not newcommits:
repo.ui.warn(_('%s: cannot fold - working copy is not a '
'descendant of previous commit %s\n') %
(node.short(self.node), node.short(parentctxnode)))
return ctx, [(self.node, (ctx.node(),))]
middlecommits = newcommits.copy()
middlecommits.discard(ctx.node())
return self.finishfold(repo.ui, repo, parentctx, rulectx, ctx.node(),
middlecommits)
def skipprompt(self):
"""Returns true if the rule should skip the message editor.
For example, 'fold' wants to show an editor, but 'rollup'
doesn't want to.
"""
return False
def mergedescs(self):
"""Returns true if the rule should merge messages of multiple changes.
This exists mainly so that 'rollup' rules can be a subclass of
'fold'.
"""
return True
def firstdate(self):
"""Returns true if the rule should preserve the date of the first
change.
This exists mainly so that 'rollup' rules can be a subclass of
'fold'.
"""
return False
def finishfold(self, ui, repo, ctx, oldctx, newnode, internalchanges):
parent = ctx.parents()[0].node()
repo.ui.pushbuffer()
hg.update(repo, parent)
repo.ui.popbuffer()
### prepare new commit data
commitopts = {}
commitopts['user'] = ctx.user()
# commit message
if not self.mergedescs():
newmessage = ctx.description()
else:
newmessage = '\n***\n'.join(
[ctx.description()] +
[repo[r].description() for r in internalchanges] +
[oldctx.description()]) + '\n'
commitopts['message'] = newmessage
# date
if self.firstdate():
commitopts['date'] = ctx.date()
else:
commitopts['date'] = max(ctx.date(), oldctx.date())
extra = ctx.extra().copy()
# histedit_source
# note: ctx is likely a temporary commit but that the best we can do
# here. This is sufficient to solve issue3681 anyway.
extra['histedit_source'] = '%s,%s' % (ctx.hex(), oldctx.hex())
commitopts['extra'] = extra
phasemin = max(ctx.phase(), oldctx.phase())
overrides = {('phases', 'new-commit'): phasemin}
with repo.ui.configoverride(overrides, 'histedit'):
n = collapse(repo, ctx, repo[newnode], commitopts,
skipprompt=self.skipprompt())
if n is None:
return ctx, []
repo.ui.pushbuffer()
hg.update(repo, n)
repo.ui.popbuffer()
replacements = [(oldctx.node(), (newnode,)),
(ctx.node(), (n,)),
(newnode, (n,)),
]
for ich in internalchanges:
replacements.append((ich, (n,)))
return repo[n], replacements
class base(histeditaction):
def run(self):
if self.repo['.'].node() != self.node:
mergemod.update(self.repo, self.node, False, True)
# branchmerge, force)
return self.continueclean()
def continuedirty(self):
abortdirty()
def continueclean(self):
basectx = self.repo['.']
return basectx, []
def _verifynodeconstraints(self, prev, expected, seen):
# base can only be use with a node not in the edited set
if self.node in expected:
msg = _('%s "%s" changeset was an edited list candidate')
raise error.ParseError(
msg % (self.verb, node.short(self.node)),
hint=_('base must only use unlisted changesets'))
@action(['_multifold'],
_(
"""fold subclass used for when multiple folds happen in a row
We only want to fire the editor for the folded message once when
(say) four changes are folded down into a single change. This is
similar to rollup, but we should preserve both messages so that
when the last fold operation runs we can show the user all the
commit messages in their editor.
"""),
internal=True)
class _multifold(fold):
def skipprompt(self):
return True
@action(["roll", "r"],
_("like fold, but discard this commit's description and date"))
class rollup(fold):
def mergedescs(self):
return False
def skipprompt(self):
return True
def firstdate(self):
return True
@action(["drop", "d"],
_('remove commit from history'))
class drop(histeditaction):
def run(self):
parentctx = self.repo[self.state.parentctxnode]
return parentctx, [(self.node, tuple())]
@action(["mess", "m"],
_('edit commit message without changing commit content'),
priority=True)
class message(histeditaction):
def commiteditor(self):
return cmdutil.getcommiteditor(edit=True, editform='histedit.mess')
def findoutgoing(ui, repo, remote=None, force=False, opts=None):
"""utility function to find the first outgoing changeset
Used by initialization code"""
if opts is None:
opts = {}
dest = ui.expandpath(remote or 'default-push', remote or 'default')
dest, revs = hg.parseurl(dest, None)[:2]
ui.status(_('comparing with %s\n') % util.hidepassword(dest))
revs, checkout = hg.addbranchrevs(repo, repo, revs, None)
other = hg.peer(repo, opts, dest)
if revs:
revs = [repo.lookup(rev) for rev in revs]
outgoing = discovery.findcommonoutgoing(repo, other, revs, force=force)
if not outgoing.missing:
raise error.Abort(_('no outgoing ancestors'))
roots = list(repo.revs("roots(%ln)", outgoing.missing))
if 1 < len(roots):
msg = _('there are ambiguous outgoing revisions')
hint = _("see 'hg help histedit' for more detail")
raise error.Abort(msg, hint=hint)
return repo.lookup(roots[0])
@command('histedit',
[('', 'commands', '',
_('read history edits from the specified file'), _('FILE')),
('c', 'continue', False, _('continue an edit already in progress')),
('', 'edit-plan', False, _('edit remaining actions list')),
('k', 'keep', False,
_("don't strip old nodes after edit is complete")),
('', 'abort', False, _('abort an edit in progress')),
('o', 'outgoing', False, _('changesets not found in destination')),
('f', 'force', False,
_('force outgoing even for unrelated repositories')),
('r', 'rev', [], _('first revision to be edited'), _('REV'))],
_("[OPTIONS] ([ANCESTOR] | --outgoing [URL])"))
def histedit(ui, repo, *freeargs, **opts):
"""interactively edit changeset history
This command lets you edit a linear series of changesets (up to
and including the working directory, which should be clean).
You can:
- `pick` to [re]order a changeset
- `drop` to omit changeset
- `mess` to reword the changeset commit message
- `fold` to combine it with the preceding changeset (using the later date)
- `roll` like fold, but discarding this commit's description and date
- `edit` to edit this changeset (preserving date)
There are a number of ways to select the root changeset:
- Specify ANCESTOR directly
- Use --outgoing -- it will be the first linear changeset not
included in destination. (See :hg:`help config.paths.default-push`)
- Otherwise, the value from the "histedit.defaultrev" config option
is used as a revset to select the base revision when ANCESTOR is not
specified. The first revision returned by the revset is used. By
default, this selects the editable history that is unique to the
ancestry of the working directory.
.. container:: verbose
If you use --outgoing, this command will abort if there are ambiguous
outgoing revisions. For example, if there are multiple branches
containing outgoing revisions.
Use "min(outgoing() and ::.)" or similar revset specification
instead of --outgoing to specify edit target revision exactly in
such ambiguous situation. See :hg:`help revsets` for detail about
selecting revisions.
.. container:: verbose
Examples:
- A number of changes have been made.
Revision 3 is no longer needed.
Start history editing from revision 3::
hg histedit -r 3
An editor opens, containing the list of revisions,
with specific actions specified::
pick 5339bf82f0ca 3 Zworgle the foobar
pick 8ef592ce7cc4 4 Bedazzle the zerlog
pick 0a9639fcda9d 5 Morgify the cromulancy
Additional information about the possible actions
to take appears below the list of revisions.
To remove revision 3 from the history,
its action (at the beginning of the relevant line)
is changed to 'drop'::
drop 5339bf82f0ca 3 Zworgle the foobar
pick 8ef592ce7cc4 4 Bedazzle the zerlog
pick 0a9639fcda9d 5 Morgify the cromulancy
- A number of changes have been made.
Revision 2 and 4 need to be swapped.
Start history editing from revision 2::
hg histedit -r 2
An editor opens, containing the list of revisions,
with specific actions specified::
pick 252a1af424ad 2 Blorb a morgwazzle
pick 5339bf82f0ca 3 Zworgle the foobar
pick 8ef592ce7cc4 4 Bedazzle the zerlog
To swap revision 2 and 4, its lines are swapped
in the editor::
pick 8ef592ce7cc4 4 Bedazzle the zerlog
pick 5339bf82f0ca 3 Zworgle the foobar
pick 252a1af424ad 2 Blorb a morgwazzle
Returns 0 on success, 1 if user intervention is required (not only
for intentional "edit" command, but also for resolving unexpected
conflicts).
"""
state = histeditstate(repo)
try:
state.wlock = repo.wlock()
state.lock = repo.lock()
_histedit(ui, repo, state, *freeargs, **opts)
finally:
release(state.lock, state.wlock)
goalcontinue = 'continue'
goalabort = 'abort'
goaleditplan = 'edit-plan'
goalnew = 'new'
def _getgoal(opts):
if opts.get('continue'):
return goalcontinue
if opts.get('abort'):
return goalabort
if opts.get('edit_plan'):
return goaleditplan
return goalnew
def _readfile(ui, path):
if path == '-':
with ui.timeblockedsection('histedit'):
return ui.fin.read()
else:
with open(path, 'rb') as f:
return f.read()
def _validateargs(ui, repo, state, freeargs, opts, goal, rules, revs):
# TODO only abort if we try to histedit mq patches, not just
# blanket if mq patches are applied somewhere
mq = getattr(repo, 'mq', None)
if mq and mq.applied:
raise error.Abort(_('source has mq patches applied'))
# basic argument incompatibility processing
outg = opts.get('outgoing')
editplan = opts.get('edit_plan')
abort = opts.get('abort')
force = opts.get('force')
if force and not outg:
raise error.Abort(_('--force only allowed with --outgoing'))
if goal == 'continue':
if any((outg, abort, revs, freeargs, rules, editplan)):
raise error.Abort(_('no arguments allowed with --continue'))
elif goal == 'abort':
if any((outg, revs, freeargs, rules, editplan)):
raise error.Abort(_('no arguments allowed with --abort'))
elif goal == 'edit-plan':
if any((outg, revs, freeargs)):
raise error.Abort(_('only --commands argument allowed with '
'--edit-plan'))
else:
if os.path.exists(os.path.join(repo.path, 'histedit-state')):
raise error.Abort(_('history edit already in progress, try '
'--continue or --abort'))
if outg:
if revs:
raise error.Abort(_('no revisions allowed with --outgoing'))
if len(freeargs) > 1:
raise error.Abort(
_('only one repo argument allowed with --outgoing'))
else:
revs.extend(freeargs)
if len(revs) == 0:
defaultrev = destutil.desthistedit(ui, repo)
if defaultrev is not None:
revs.append(defaultrev)
if len(revs) != 1:
raise error.Abort(
_('histedit requires exactly one ancestor revision'))
def _histedit(ui, repo, state, *freeargs, **opts):
goal = _getgoal(opts)
revs = opts.get('rev', [])
rules = opts.get('commands', '')
state.keep = opts.get('keep', False)
_validateargs(ui, repo, state, freeargs, opts, goal, rules, revs)
# rebuild state
if goal == goalcontinue:
state.read()
state = bootstrapcontinue(ui, state, opts)
elif goal == goaleditplan:
_edithisteditplan(ui, repo, state, rules)
return
elif goal == goalabort:
_aborthistedit(ui, repo, state)
return
else:
# goal == goalnew
_newhistedit(ui, repo, state, revs, freeargs, opts)
_continuehistedit(ui, repo, state)
_finishhistedit(ui, repo, state)
def _continuehistedit(ui, repo, state):
"""This function runs after either:
- bootstrapcontinue (if the goal is 'continue')
- _newhistedit (if the goal is 'new')
"""
# preprocess rules so that we can hide inner folds from the user
# and only show one editor
actions = state.actions[:]
for idx, (action, nextact) in enumerate(
zip(actions, actions[1:] + [None])):
if action.verb == 'fold' and nextact and nextact.verb == 'fold':
state.actions[idx].__class__ = _multifold
total = len(state.actions)
pos = 0
state.tr = None
# Force an initial state file write, so the user can run --abort/continue
# even if there's an exception before the first transaction serialize.
state.write()
try:
# Don't use singletransaction by default since it rolls the entire
# transaction back if an unexpected exception happens (like a
# pretxncommit hook throws, or the user aborts the commit msg editor).
if ui.configbool("histedit", "singletransaction", False):
# Don't use a 'with' for the transaction, since actions may close
# and reopen a transaction. For example, if the action executes an
# external process it may choose to commit the transaction first.
state.tr = repo.transaction('histedit')
while state.actions:
state.write(tr=state.tr)
actobj = state.actions[0]
pos += 1
ui.progress(_("editing"), pos, actobj.torule(),
_('changes'), total)
ui.debug('histedit: processing %s %s\n' % (actobj.verb,\
actobj.torule()))
parentctx, replacement_ = actobj.run()
state.parentctxnode = parentctx.node()
state.replacements.extend(replacement_)
state.actions.pop(0)
if state.tr is not None:
state.tr.close()
except error.InterventionRequired:
if state.tr is not None:
state.tr.close()
raise
except Exception:
if state.tr is not None:
state.tr.abort()
raise
state.write()
ui.progress(_("editing"), None)
def _finishhistedit(ui, repo, state):
"""This action runs when histedit is finishing its session"""
repo.ui.pushbuffer()
hg.update(repo, state.parentctxnode, quietempty=True)
repo.ui.popbuffer()
mapping, tmpnodes, created, ntm = processreplacement(state)
if mapping:
for prec, succs in mapping.iteritems():
if not succs:
ui.debug('histedit: %s is dropped\n' % node.short(prec))
else:
ui.debug('histedit: %s is replaced by %s\n' % (
node.short(prec), node.short(succs[0])))
if len(succs) > 1:
m = 'histedit: %s'
for n in succs[1:]:
ui.debug(m % node.short(n))
safecleanupnode(ui, repo, 'temp', tmpnodes)
if not state.keep:
if mapping:
movebookmarks(ui, repo, mapping, state.topmost, ntm)
# TODO update mq state
safecleanupnode(ui, repo, 'replaced', mapping)
state.clear()
if os.path.exists(repo.sjoin('undo')):
os.unlink(repo.sjoin('undo'))
if repo.vfs.exists('histedit-last-edit.txt'):
repo.vfs.unlink('histedit-last-edit.txt')
def _aborthistedit(ui, repo, state):
try:
state.read()
__, leafs, tmpnodes, __ = processreplacement(state)
ui.debug('restore wc to old parent %s\n'
% node.short(state.topmost))
# Recover our old commits if necessary
if not state.topmost in repo and state.backupfile:
backupfile = repo.vfs.join(state.backupfile)
f = hg.openpath(ui, backupfile)
gen = exchange.readbundle(ui, f, backupfile)
with repo.transaction('histedit.abort') as tr:
if not isinstance(gen, bundle2.unbundle20):
gen.apply(repo, 'histedit', 'bundle:' + backupfile)
if isinstance(gen, bundle2.unbundle20):
bundle2.applybundle(repo, gen, tr,
source='histedit',
url='bundle:' + backupfile)
os.remove(backupfile)
# check whether we should update away
if repo.unfiltered().revs('parents() and (%n or %ln::)',
state.parentctxnode, leafs | tmpnodes):
hg.clean(repo, state.topmost, show_stats=True, quietempty=True)
cleanupnode(ui, repo, 'created', tmpnodes)
cleanupnode(ui, repo, 'temp', leafs)
except Exception:
if state.inprogress():
ui.warn(_('warning: encountered an exception during histedit '
'--abort; the repository may not have been completely '
'cleaned up\n'))
raise
finally:
state.clear()
def _edithisteditplan(ui, repo, state, rules):
state.read()
if not rules:
comment = geteditcomment(ui,
node.short(state.parentctxnode),
node.short(state.topmost))
rules = ruleeditor(repo, ui, state.actions, comment)
else:
rules = _readfile(ui, rules)
actions = parserules(rules, state)
ctxs = [repo[act.node] \
for act in state.actions if act.node]
warnverifyactions(ui, repo, actions, state, ctxs)
state.actions = actions
state.write()
def _newhistedit(ui, repo, state, revs, freeargs, opts):
outg = opts.get('outgoing')
rules = opts.get('commands', '')
force = opts.get('force')
cmdutil.checkunfinished(repo)
cmdutil.bailifchanged(repo)
topmost, empty = repo.dirstate.parents()
if outg:
if freeargs:
remote = freeargs[0]
else:
remote = None
root = findoutgoing(ui, repo, remote, force, opts)
else:
rr = list(repo.set('roots(%ld)', scmutil.revrange(repo, revs)))
if len(rr) != 1:
raise error.Abort(_('The specified revisions must have '
'exactly one common root'))
root = rr[0].node()
revs = between(repo, root, topmost, state.keep)
if not revs:
raise error.Abort(_('%s is not an ancestor of working directory') %
node.short(root))
ctxs = [repo[r] for r in revs]
if not rules:
comment = geteditcomment(ui, node.short(root), node.short(topmost))
actions = [pick(state, r) for r in revs]
rules = ruleeditor(repo, ui, actions, comment)
else:
rules = _readfile(ui, rules)
actions = parserules(rules, state)
warnverifyactions(ui, repo, actions, state, ctxs)
parentctxnode = repo[root].parents()[0].node()
state.parentctxnode = parentctxnode
state.actions = actions
state.topmost = topmost
state.replacements = []
# Create a backup so we can always abort completely.
backupfile = None
if not obsolete.isenabled(repo, obsolete.createmarkersopt):
backupfile = repair._bundle(repo, [parentctxnode], [topmost], root,
'histedit')
state.backupfile = backupfile
def _getsummary(ctx):
# a common pattern is to extract the summary but default to the empty
# string
summary = ctx.description() or ''
if summary:
summary = summary.splitlines()[0]
return summary
def bootstrapcontinue(ui, state, opts):
repo = state.repo
ms = mergemod.mergestate.read(repo)
mergeutil.checkunresolved(ms)
if state.actions:
actobj = state.actions.pop(0)
if _isdirtywc(repo):
actobj.continuedirty()
if _isdirtywc(repo):
abortdirty()
parentctx, replacements = actobj.continueclean()
state.parentctxnode = parentctx.node()
state.replacements.extend(replacements)
return state
def between(repo, old, new, keep):
"""select and validate the set of revision to edit
When keep is false, the specified set can't have children."""
ctxs = list(repo.set('%n::%n', old, new))
if ctxs and not keep:
if (not obsolete.isenabled(repo, obsolete.allowunstableopt) and
repo.revs('(%ld::) - (%ld)', ctxs, ctxs)):
raise error.Abort(_('can only histedit a changeset together '
'with all its descendants'))
if repo.revs('(%ld) and merge()', ctxs):
raise error.Abort(_('cannot edit history that contains merges'))
root = ctxs[0] # list is already sorted by repo.set
if not root.mutable():
raise error.Abort(_('cannot edit public changeset: %s') % root,
hint=_("see 'hg help phases' for details"))
return [c.node() for c in ctxs]
def ruleeditor(repo, ui, actions, editcomment=""):
"""open an editor to edit rules
rules are in the format [ [act, ctx], ...] like in state.rules
"""
if repo.ui.configbool("experimental", "histedit.autoverb"):
newact = util.sortdict()
for act in actions:
ctx = repo[act.node]
summary = _getsummary(ctx)
fword = summary.split(' ', 1)[0].lower()
added = False
# if it doesn't end with the special character '!' just skip this
if fword.endswith('!'):
fword = fword[:-1]
if fword in primaryactions | secondaryactions | tertiaryactions:
act.verb = fword
# get the target summary
tsum = summary[len(fword) + 1:].lstrip()
# safe but slow: reverse iterate over the actions so we
# don't clash on two commits having the same summary
for na, l in reversed(list(newact.iteritems())):
actx = repo[na.node]
asum = _getsummary(actx)
if asum == tsum:
added = True
l.append(act)
break
if not added:
newact[act] = []
# copy over and flatten the new list
actions = []
for na, l in newact.iteritems():
actions.append(na)
actions += l
rules = '\n'.join([act.torule() for act in actions])
rules += '\n\n'
rules += editcomment
rules = ui.edit(rules, ui.username(), {'prefix': 'histedit'},
repopath=repo.path)
# Save edit rules in .hg/histedit-last-edit.txt in case
# the user needs to ask for help after something
# surprising happens.
f = open(repo.vfs.join('histedit-last-edit.txt'), 'w')
f.write(rules)
f.close()
return rules
def parserules(rules, state):
"""Read the histedit rules string and return list of action objects """
rules = [l for l in (r.strip() for r in rules.splitlines())
if l and not l.startswith('#')]
actions = []
for r in rules:
if ' ' not in r:
raise error.ParseError(_('malformed line "%s"') % r)
verb, rest = r.split(' ', 1)
if verb not in actiontable:
raise error.ParseError(_('unknown action "%s"') % verb)
action = actiontable[verb].fromrule(state, rest)
actions.append(action)
return actions
def warnverifyactions(ui, repo, actions, state, ctxs):
try:
verifyactions(actions, state, ctxs)
except error.ParseError:
if repo.vfs.exists('histedit-last-edit.txt'):
ui.warn(_('warning: histedit rules saved '
'to: .hg/histedit-last-edit.txt\n'))
raise
def verifyactions(actions, state, ctxs):
"""Verify that there exists exactly one action per given changeset and
other constraints.
Will abort if there are to many or too few rules, a malformed rule,
or a rule on a changeset outside of the user-given range.
"""
expected = set(c.node() for c in ctxs)
seen = set()
prev = None
for action in actions:
action.verify(prev, expected, seen)
prev = action
if action.node is not None:
seen.add(action.node)
missing = sorted(expected - seen) # sort to stabilize output
if state.repo.ui.configbool('histedit', 'dropmissing'):
if len(actions) == 0:
raise error.ParseError(_('no rules provided'),
hint=_('use strip extension to remove commits'))
drops = [drop(state, n) for n in missing]
# put the in the beginning so they execute immediately and
# don't show in the edit-plan in the future
actions[:0] = drops
elif missing:
raise error.ParseError(_('missing rules for changeset %s') %
node.short(missing[0]),
hint=_('use "drop %s" to discard, see also: '
"'hg help -e histedit.config'")
% node.short(missing[0]))
def adjustreplacementsfrommarkers(repo, oldreplacements):
"""Adjust replacements from obsolescence markers
Replacements structure is originally generated based on
histedit's state and does not account for changes that are
not recorded there. This function fixes that by adding
data read from obsolescence markers"""
if not obsolete.isenabled(repo, obsolete.createmarkersopt):
return oldreplacements
unfi = repo.unfiltered()
nm = unfi.changelog.nodemap
obsstore = repo.obsstore
newreplacements = list(oldreplacements)
oldsuccs = [r[1] for r in oldreplacements]
# successors that have already been added to succstocheck once
seensuccs = set().union(*oldsuccs) # create a set from an iterable of tuples
succstocheck = list(seensuccs)
while succstocheck:
n = succstocheck.pop()
missing = nm.get(n) is None
markers = obsstore.successors.get(n, ())
if missing and not markers:
# dead end, mark it as such
newreplacements.append((n, ()))
for marker in markers:
nsuccs = marker[1]
newreplacements.append((n, nsuccs))
for nsucc in nsuccs:
if nsucc not in seensuccs:
seensuccs.add(nsucc)
succstocheck.append(nsucc)
return newreplacements
def processreplacement(state):
"""process the list of replacements to return
1) the final mapping between original and created nodes
2) the list of temporary node created by histedit
3) the list of new commit created by histedit"""
replacements = adjustreplacementsfrommarkers(state.repo, state.replacements)
allsuccs = set()
replaced = set()
fullmapping = {}
# initialize basic set
# fullmapping records all operations recorded in replacement
for rep in replacements:
allsuccs.update(rep[1])
replaced.add(rep[0])
fullmapping.setdefault(rep[0], set()).update(rep[1])
new = allsuccs - replaced
tmpnodes = allsuccs & replaced
# Reduce content fullmapping into direct relation between original nodes
# and final node created during history edition
# Dropped changeset are replaced by an empty list
toproceed = set(fullmapping)
final = {}
while toproceed:
for x in list(toproceed):
succs = fullmapping[x]
for s in list(succs):
if s in toproceed:
# non final node with unknown closure
# We can't process this now
break
elif s in final:
# non final node, replace with closure
succs.remove(s)
succs.update(final[s])
else:
final[x] = succs
toproceed.remove(x)
# remove tmpnodes from final mapping
for n in tmpnodes:
del final[n]
# we expect all changes involved in final to exist in the repo
# turn `final` into list (topologically sorted)
nm = state.repo.changelog.nodemap
for prec, succs in final.items():
final[prec] = sorted(succs, key=nm.get)
# computed topmost element (necessary for bookmark)
if new:
newtopmost = sorted(new, key=state.repo.changelog.rev)[-1]
elif not final:
# Nothing rewritten at all. we won't need `newtopmost`
# It is the same as `oldtopmost` and `processreplacement` know it
newtopmost = None
else:
# every body died. The newtopmost is the parent of the root.
r = state.repo.changelog.rev
newtopmost = state.repo[sorted(final, key=r)[0]].p1().node()
return final, tmpnodes, new, newtopmost
def movebookmarks(ui, repo, mapping, oldtopmost, newtopmost):
"""Move bookmark from old to newly created node"""
if not mapping:
# if nothing got rewritten there is not purpose for this function
return
moves = []
for bk, old in sorted(repo._bookmarks.iteritems()):
if old == oldtopmost:
# special case ensure bookmark stay on tip.
#
# This is arguably a feature and we may only want that for the
# active bookmark. But the behavior is kept compatible with the old
# version for now.
moves.append((bk, newtopmost))
continue
base = old
new = mapping.get(base, None)
if new is None:
continue
while not new:
# base is killed, trying with parent
base = repo[base].p1().node()
new = mapping.get(base, (base,))
# nothing to move
moves.append((bk, new[-1]))
if moves:
lock = tr = None
try:
lock = repo.lock()
tr = repo.transaction('histedit')
marks = repo._bookmarks
for mark, new in moves:
old = marks[mark]
ui.note(_('histedit: moving bookmarks %s from %s to %s\n')
% (mark, node.short(old), node.short(new)))
marks[mark] = new
marks.recordchange(tr)
tr.close()
finally:
release(tr, lock)
def cleanupnode(ui, repo, name, nodes):
"""strip a group of nodes from the repository
The set of node to strip may contains unknown nodes."""
ui.debug('should strip %s nodes %s\n' %
(name, ', '.join([node.short(n) for n in nodes])))
with repo.lock():
# do not let filtering get in the way of the cleanse
# we should probably get rid of obsolescence marker created during the
# histedit, but we currently do not have such information.
repo = repo.unfiltered()
# Find all nodes that need to be stripped
# (we use %lr instead of %ln to silently ignore unknown items)
nm = repo.changelog.nodemap
nodes = sorted(n for n in nodes if n in nm)
roots = [c.node() for c in repo.set("roots(%ln)", nodes)]
for c in roots:
# We should process node in reverse order to strip tip most first.
# but this trigger a bug in changegroup hook.
# This would reduce bundle overhead
repair.strip(ui, repo, c)
def safecleanupnode(ui, repo, name, nodes):
"""strip or obsolete nodes
nodes could be either a set or dict which maps to replacements.
nodes could be unknown (outside the repo).
"""
supportsmarkers = obsolete.isenabled(repo, obsolete.createmarkersopt)
if supportsmarkers:
if util.safehasattr(nodes, 'get'):
# nodes is a dict-like mapping
# use unfiltered repo for successors in case they are hidden
urepo = repo.unfiltered()
def getmarker(prec):
succs = tuple(urepo[n] for n in nodes.get(prec, ()))
return (repo[prec], succs)
else:
# nodes is a set-like
def getmarker(prec):
return (repo[prec], ())
# sort by revision number because it sound "right"
sortednodes = sorted([n for n in nodes if n in repo],
key=repo.changelog.rev)
markers = [getmarker(t) for t in sortednodes]
if markers:
obsolete.createmarkers(repo, markers, operation='histedit')
else:
return cleanupnode(ui, repo, name, nodes)
def stripwrapper(orig, ui, repo, nodelist, *args, **kwargs):
if isinstance(nodelist, str):
nodelist = [nodelist]
if os.path.exists(os.path.join(repo.path, 'histedit-state')):
state = histeditstate(repo)
state.read()
histedit_nodes = {action.node for action
in state.actions if action.node}
common_nodes = histedit_nodes & set(nodelist)
if common_nodes:
raise error.Abort(_("histedit in progress, can't strip %s")
% ', '.join(node.short(x) for x in common_nodes))
return orig(ui, repo, nodelist, *args, **kwargs)
extensions.wrapfunction(repair, 'strip', stripwrapper)
def summaryhook(ui, repo):
if not os.path.exists(repo.vfs.join('histedit-state')):
return
state = histeditstate(repo)
state.read()
if state.actions:
# i18n: column positioning for "hg summary"
ui.write(_('hist: %s (histedit --continue)\n') %
(ui.label(_('%d remaining'), 'histedit.remaining') %
len(state.actions)))
def extsetup(ui):
cmdutil.summaryhooks.add('histedit', summaryhook)
cmdutil.unfinishedstates.append(
['histedit-state', False, True, _('histedit in progress'),
_("use 'hg histedit --continue' or 'hg histedit --abort'")])
cmdutil.afterresolvedstates.append(
['histedit-state', _('hg histedit --continue')])
if ui.configbool("experimental", "histeditng"):
globals()['base'] = action(['base', 'b'],
_('checkout changeset and apply further changesets from there')
)(base)