Mercurial > hg
view tests/test-bookflow.t @ 42044:bb271ec2fbfb
compression: introduce a `storage.revlog.zstd.level` configuration
This option control the zstd compression level used when compressing revlog
chunk. The usage of zstd for revlog compression has not graduated from
experimental yet, but we intend to fix that soon.
The option name for the compression level is more straight forward to pick, so
this changesets comes first. Having a dedicated option for each compression
engine is useful because they don't support the same range of values.
I ran the same measurement as for the zlib compression level (in the parent
changesets). The variation in repository size is stay mostly in the same (small)
range. The "read/write" performance see smallish variation, but are overall much
better than zlib. Write performance show the same tend of having better write
performance for when reaching high-end compression.
Again, we don't intend to change the default zstd compression level (currently:
3) in this series. However this is worth investigating in the future.
The Performance comparison of zlib vs zstd is quite impressive. The repository
size stay in the same range, but the performance are much better in all
situations.
Comparison summary
==================
We are looking at:
- performance range for zlib
- performance range for zstd
- comparison of default zstd (level-3) to default zlib (level 6)
- comparison of the slowest zstd time to the fastest zlib time
Read performance:
-----------------
| zlib | zstd | cmp | f2s
mercurial | 0.170159 - 0.189219 | 0.144127 - 0.149624 | 80% | 88%
pypy | 2.679217 - 2.768691 | 1.532317 - 1.705044 | 60% | 63%
netbeans | 122.477027 - 141.620281 | 72.996346 - 89.731560 | 58% | 73%
mozilla | 147.867662 - 170.572118 | 91.700995 - 105.853099 | 56% | 71%
Write performance:
------------------
| zlib | zstd | cmp | f2s
mercurial | 53.250304 - 56.2936129 | 40.877025 - 45.677286 | 75% | 86%
pypy | 460.721984 - 476.589918 | 270.545409 - 301.002219 | 63% | 65%
netbeans | 520.560316 - 715.930400 | 370.356311 - 428.329652 | 55% | 82%
mozilla | 739.803002 - 987.056093 | 505.152906 - 591.930683 | 57% | 80%
Raw data
--------
repo alg lvl .hg/store size 00manifest.d read write
mercurial zlib 1 49,402,813 5,963,475 0.170159 53.250304
mercurial zlib 6 47,197,397 5,875,730 0.182820 56.264320
mercurial zlib 9 47,121,596 5,849,781 0.189219 56.293612
mercurial zstd 1 49,737,084 5,966,355 0.144127 40.877025
mercurial zstd 3 48,961,867 5,895,208 0.146376 42.268142
mercurial zstd 5 48,200,592 5,938,676 0.149624 43.162875
mercurial zstd 10 47,833,520 5,913,353 0.145185 44.012489
mercurial zstd 15 47,314,604 5,728,679 0.147686 45.677286
mercurial zstd 20 47,330,502 5,830,539 0.145789 45.025407
mercurial zstd 22 47,330,076 5,830,539 0.143996 44.690460
pypy zlib 1 370,830,572 28,462,425 2.679217 460.721984
pypy zlib 6 340,112,317 27,648,747 2.768691 467.537158
pypy zlib 9 338,360,736 27,639,003 2.763495 476.589918
pypy zstd 1 362,377,479 27,916,214 1.532317 270.545409
pypy zstd 3 354,137,693 27,905,988 1.686718 294.951509
pypy zstd 5 342,640,043 27,655,774 1.705044 301.002219
pypy zstd 10 334,224,327 27,164,493 1.567287 285.186239
pypy zstd 15 329,000,363 26,645,965 1.637729 299.561332
pypy zstd 20 324,534,039 26,199,547 1.526813 302.149827
pypy zstd 22 324,530,595 26,198,932 1.525718 307.821218
netbeans zlib 1 1,281,847,810 165,495,457 122.477027 520.560316
netbeans zlib 6 1,205,284,353 159,161,207 139.876147 715.930400
netbeans zlib 9 1,197,135,671 155,034,586 141.620281 678.297064
netbeans zstd 1 1,259,581,737 160,840,613 72.996346 370.356311
netbeans zstd 3 1,232,978,122 157,691,551 81.622317 396.733087
netbeans zstd 5 1,208,034,075 160,246,880 83.080549 364.342626
netbeans zstd 10 1,188,624,176 156,083,417 79.323935 403.594602
netbeans zstd 15 1,176,973,589 153,859,477 89.731560 428.329652
netbeans zstd 20 1,162,958,258 151,147,535 82.842667 392.335349
netbeans zstd 22 1,162,707,029 151,150,220 82.565695 402.840655
mozilla zlib 1 2,775,497,186 298,527,987 147.867662 751.263721
mozilla zlib 6 2,596,856,420 286,597,671 170.572118 987.056093
mozilla zlib 9 2,587,542,494 287,018,264 163.622338 739.803002
mozilla zstd 1 2,723,159,348 286,617,532 91.700995 570.042751
mozilla zstd 3 2,665,055,001 286,152,013 95.240155 561.412805
mozilla zstd 5 2,607,819,817 288,060,030 101.978048 505.152906
mozilla zstd 10 2,558,761,085 283,967,648 104.113481 497.771202
mozilla zstd 15 2,526,216,060 275,581,300 105.853099 591.930683
mozilla zstd 20 2,485,114,806 266,478,859 95.268795 576.515389
mozilla zstd 22 2,484,869,080 266,456,505 94.429282 572.785537
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Wed, 27 Mar 2019 18:35:59 +0100 |
parents | 9cec7a36bab8 |
children | 3de4f17f4824 |
line wrap: on
line source
initialize $ make_changes() { > d=`pwd` > [ ! -z $1 ] && cd $1 > echo "test `basename \`pwd\``" >> test > hg commit -Am"${2:-test}" > r=$? > cd $d > return $r > } $ ls -1a . .. $ hg init a $ cd a $ echo 'test' > test; hg commit -Am'test' adding test clone to b $ mkdir ../b $ cd ../b $ hg clone ../a . updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "[extensions]" >> .hg/hgrc $ echo "bookflow=" >> .hg/hgrc $ hg branch X abort: creating named branches is disabled and you should use bookmarks (see 'hg help bookflow') [255] $ hg bookmark X $ hg bookmarks * X 0:* (glob) $ hg bookmark X abort: bookmark X already exists, to move use the --rev option [255] $ make_changes $ hg push ../a -q $ hg bookmarks \* X 1:* (glob) change a $ cd ../a $ hg up 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo 'test' >> test; hg commit -Am'test' pull in b $ cd ../b $ hg pull -u pulling from $TESTTMP/a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets * (glob) 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (leaving bookmark X) $ hg status $ hg bookmarks X 1:* (glob) check protection of @ bookmark $ hg bookmark @ $ hg bookmarks \* @ 2:* (glob) X 1:* (glob) $ make_changes abort: cannot commit, bookmark @ is protected [255] $ hg status M test $ hg bookmarks \* @ 2:* (glob) X 1:* (glob) $ hg --config bookflow.protect= commit -Am"Updated test" $ hg bookmarks \* @ 3:* (glob) X 1:* (glob) check requirement for an active bookmark $ hg bookmark -i $ hg bookmarks @ 3:* (glob) X 1:* (glob) $ make_changes abort: cannot commit without an active bookmark [255] $ hg revert test $ rm test.orig $ hg status make the bookmark move by updating it on a, and then pulling # add a commit to a $ cd ../a $ hg bookmark X $ hg bookmarks \* X 2:* (glob) $ make_changes $ hg bookmarks * X 3:81af7977fdb9 # go back to b, and check out X $ cd ../b $ hg up X 1 files updated, 0 files merged, 0 files removed, 0 files unresolved (activating bookmark X) $ hg bookmarks @ 3:* (glob) \* X 1:* (glob) # pull, this should move the bookmark forward, because it was changed remotely $ hg pull -u | grep "updating to active bookmark X" updating to active bookmark X $ hg bookmarks @ 3:* (glob) * X 4:81af7977fdb9 the bookmark should not move if it diverged from remote $ hg -R ../a status $ hg -R ../b status $ make_changes ../a $ make_changes ../b $ hg -R ../a status $ hg -R ../b status $ hg -R ../a bookmarks * X 4:238292f60a57 $ hg -R ../b bookmarks @ 3:* (glob) * X 5:096f7e86892d $ cd ../b $ # make sure we cannot push after bookmarks diverged $ hg push -B X | grep abort abort: push creates new remote head * with bookmark 'X'! (glob) (pull and merge or see 'hg help push' for details about pushing new heads) [1] $ hg pull -u | grep divergent divergent bookmark X stored as X@default 1 other divergent bookmarks for "X" $ hg bookmarks @ 3:* (glob) * X 5:096f7e86892d X@default 6:238292f60a57 $ hg id -in 096f7e86892d 5 $ make_changes $ hg status $ hg bookmarks @ 3:* (glob) * X 7:227f941aeb07 X@default 6:238292f60a57 now merge with the remote bookmark $ hg merge X@default --tool :local -q $ hg status M test $ hg commit -m"Merged with X@default" $ hg bookmarks @ 3:* (glob) * X 8:26fed9bb3219 $ hg push -B X | grep bookmark pushing to $TESTTMP/a (?) updating bookmark X $ cd ../a $ hg up -q $ hg bookmarks * X 7:26fed9bb3219 test hg pull when there is more than one descendant $ cd ../a $ hg bookmark Z $ hg bookmark Y $ make_changes . YY $ hg up Z -q $ make_changes . ZZ created new head $ hg bookmarks X 7:26fed9bb3219 Y 8:131e663dbd2a * Z 9:b74a4149df25 $ hg log -r 'p1(Y)' -r 'p1(Z)' -T '{rev}\n' # prove that Y and Z share the same parent 7 $ hg log -r 'Y%Z' -T '{rev}\n' # revs in Y but not in Z 8 $ hg log -r 'Z%Y' -T '{rev}\n' # revs in Z but not in Y 9 $ cd ../b $ hg pull -uq $ hg id b74a4149df25 tip Z $ hg bookmarks | grep \* # no active bookmark [1] test shelving $ cd ../a $ echo anotherfile > anotherfile # this change should not conflict $ hg add anotherfile $ hg commit -m"Change in a" $ cd ../b $ hg up Z | grep Z (activating bookmark Z) $ hg book | grep \* # make sure active bookmark \* Z 10:* (glob) $ echo "test b" >> test $ hg diff --stat test | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) $ hg --config extensions.shelve= shelve shelved as Z 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -uq $ hg --trace --config extensions.shelve= unshelve unshelving change 'Z' rebasing shelved changes $ hg diff --stat test | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) make the bookmark move by updating it on a, and then pulling with a local change # add a commit to a $ cd ../a $ hg up -C X |fgrep "activating bookmark X" (activating bookmark X) # go back to b, and check out X $ cd ../b $ hg up -C X |fgrep "activating bookmark X" (activating bookmark X) # update and push from a $ make_changes ../a created new head $ echo "more" >> test $ hg pull -u 2>&1 | fgrep -v TESTTMP| fgrep -v "searching for changes" | fgrep -v adding pulling from $TESTTMP/a added 1 changesets with 0 changes to 0 files (+1 heads) updating bookmark X new changesets * (glob) updating to active bookmark X merging test warning: conflicts while merging test! (edit, then use 'hg resolve --mark') 0 files updated, 0 files merged, 0 files removed, 1 files unresolved use 'hg resolve' to retry unresolved file merges $ hg update -Cq $ rm test.orig make sure that commits aren't possible if working directory is not pointing to active bookmark $ hg -R ../a status $ hg -R ../b status $ hg -R ../a id -i 36a6e592ec06 $ hg -R ../a book | grep X \* X \d+:36a6e592ec06 (re) $ hg -R ../b id -i 36a6e592ec06 $ hg -R ../b book | grep X \* X \d+:36a6e592ec06 (re) $ make_changes ../a $ hg -R ../a book | grep X \* X \d+:f73a71c992b8 (re) $ cd ../b $ hg pull 2>&1 | grep -v add | grep -v pulling | grep -v searching | grep -v changeset updating bookmark X (run 'hg update' to get a working copy) working directory out of sync with active bookmark, run 'hg up X' $ hg id -i # we're still on the old commit 36a6e592ec06 $ hg book | grep X # while the bookmark moved \* X \d+:f73a71c992b8 (re) $ make_changes abort: cannot commit, working directory out of sync with active bookmark (run 'hg up X') [255] $ hg up -Cq -r . # cleanup local changes $ hg status $ hg id -i # we're still on the old commit 36a6e592ec06 $ hg up X -q $ hg id -i # now we're on X f73a71c992b8 $ hg book | grep X \* X \d+:f73a71c992b8 (re)