Mercurial > hg
view tests/test-debugcommands.t @ 42044:bb271ec2fbfb
compression: introduce a `storage.revlog.zstd.level` configuration
This option control the zstd compression level used when compressing revlog
chunk. The usage of zstd for revlog compression has not graduated from
experimental yet, but we intend to fix that soon.
The option name for the compression level is more straight forward to pick, so
this changesets comes first. Having a dedicated option for each compression
engine is useful because they don't support the same range of values.
I ran the same measurement as for the zlib compression level (in the parent
changesets). The variation in repository size is stay mostly in the same (small)
range. The "read/write" performance see smallish variation, but are overall much
better than zlib. Write performance show the same tend of having better write
performance for when reaching high-end compression.
Again, we don't intend to change the default zstd compression level (currently:
3) in this series. However this is worth investigating in the future.
The Performance comparison of zlib vs zstd is quite impressive. The repository
size stay in the same range, but the performance are much better in all
situations.
Comparison summary
==================
We are looking at:
- performance range for zlib
- performance range for zstd
- comparison of default zstd (level-3) to default zlib (level 6)
- comparison of the slowest zstd time to the fastest zlib time
Read performance:
-----------------
| zlib | zstd | cmp | f2s
mercurial | 0.170159 - 0.189219 | 0.144127 - 0.149624 | 80% | 88%
pypy | 2.679217 - 2.768691 | 1.532317 - 1.705044 | 60% | 63%
netbeans | 122.477027 - 141.620281 | 72.996346 - 89.731560 | 58% | 73%
mozilla | 147.867662 - 170.572118 | 91.700995 - 105.853099 | 56% | 71%
Write performance:
------------------
| zlib | zstd | cmp | f2s
mercurial | 53.250304 - 56.2936129 | 40.877025 - 45.677286 | 75% | 86%
pypy | 460.721984 - 476.589918 | 270.545409 - 301.002219 | 63% | 65%
netbeans | 520.560316 - 715.930400 | 370.356311 - 428.329652 | 55% | 82%
mozilla | 739.803002 - 987.056093 | 505.152906 - 591.930683 | 57% | 80%
Raw data
--------
repo alg lvl .hg/store size 00manifest.d read write
mercurial zlib 1 49,402,813 5,963,475 0.170159 53.250304
mercurial zlib 6 47,197,397 5,875,730 0.182820 56.264320
mercurial zlib 9 47,121,596 5,849,781 0.189219 56.293612
mercurial zstd 1 49,737,084 5,966,355 0.144127 40.877025
mercurial zstd 3 48,961,867 5,895,208 0.146376 42.268142
mercurial zstd 5 48,200,592 5,938,676 0.149624 43.162875
mercurial zstd 10 47,833,520 5,913,353 0.145185 44.012489
mercurial zstd 15 47,314,604 5,728,679 0.147686 45.677286
mercurial zstd 20 47,330,502 5,830,539 0.145789 45.025407
mercurial zstd 22 47,330,076 5,830,539 0.143996 44.690460
pypy zlib 1 370,830,572 28,462,425 2.679217 460.721984
pypy zlib 6 340,112,317 27,648,747 2.768691 467.537158
pypy zlib 9 338,360,736 27,639,003 2.763495 476.589918
pypy zstd 1 362,377,479 27,916,214 1.532317 270.545409
pypy zstd 3 354,137,693 27,905,988 1.686718 294.951509
pypy zstd 5 342,640,043 27,655,774 1.705044 301.002219
pypy zstd 10 334,224,327 27,164,493 1.567287 285.186239
pypy zstd 15 329,000,363 26,645,965 1.637729 299.561332
pypy zstd 20 324,534,039 26,199,547 1.526813 302.149827
pypy zstd 22 324,530,595 26,198,932 1.525718 307.821218
netbeans zlib 1 1,281,847,810 165,495,457 122.477027 520.560316
netbeans zlib 6 1,205,284,353 159,161,207 139.876147 715.930400
netbeans zlib 9 1,197,135,671 155,034,586 141.620281 678.297064
netbeans zstd 1 1,259,581,737 160,840,613 72.996346 370.356311
netbeans zstd 3 1,232,978,122 157,691,551 81.622317 396.733087
netbeans zstd 5 1,208,034,075 160,246,880 83.080549 364.342626
netbeans zstd 10 1,188,624,176 156,083,417 79.323935 403.594602
netbeans zstd 15 1,176,973,589 153,859,477 89.731560 428.329652
netbeans zstd 20 1,162,958,258 151,147,535 82.842667 392.335349
netbeans zstd 22 1,162,707,029 151,150,220 82.565695 402.840655
mozilla zlib 1 2,775,497,186 298,527,987 147.867662 751.263721
mozilla zlib 6 2,596,856,420 286,597,671 170.572118 987.056093
mozilla zlib 9 2,587,542,494 287,018,264 163.622338 739.803002
mozilla zstd 1 2,723,159,348 286,617,532 91.700995 570.042751
mozilla zstd 3 2,665,055,001 286,152,013 95.240155 561.412805
mozilla zstd 5 2,607,819,817 288,060,030 101.978048 505.152906
mozilla zstd 10 2,558,761,085 283,967,648 104.113481 497.771202
mozilla zstd 15 2,526,216,060 275,581,300 105.853099 591.930683
mozilla zstd 20 2,485,114,806 266,478,859 95.268795 576.515389
mozilla zstd 22 2,484,869,080 266,456,505 94.429282 572.785537
| author | Pierre-Yves David <pierre-yves.david@octobus.net> |
|---|---|
| date | Wed, 27 Mar 2019 18:35:59 +0100 |
| parents | e4ac7e63c213 |
| children | 32338e27bb9d |
line wrap: on
line source
$ cat << EOF >> $HGRCPATH > [ui] > interactive=yes > EOF $ hg init debugrevlog $ cd debugrevlog $ echo a > a $ hg ci -Am adda adding a $ hg rm . removing a $ hg ci -Am make-it-empty $ hg revert --all -r 0 adding a $ hg ci -Am make-it-full #if reporevlogstore $ hg debugrevlog -c format : 1 flags : inline revisions : 3 merges : 0 ( 0.00%) normal : 3 (100.00%) revisions : 3 empty : 0 ( 0.00%) text : 0 (100.00%) delta : 0 (100.00%) snapshot : 3 (100.00%) lvl-0 : 3 (100.00%) deltas : 0 ( 0.00%) revision size : 191 snapshot : 191 (100.00%) lvl-0 : 191 (100.00%) deltas : 0 ( 0.00%) chunks : 3 0x75 (u) : 3 (100.00%) chunks size : 191 0x75 (u) : 191 (100.00%) avg chain length : 0 max chain length : 0 max chain reach : 67 compression ratio : 0 uncompressed data size (min/max/avg) : 57 / 66 / 62 full revision size (min/max/avg) : 58 / 67 / 63 inter-snapshot size (min/max/avg) : 0 / 0 / 0 delta size (min/max/avg) : 0 / 0 / 0 $ hg debugrevlog -m format : 1 flags : inline, generaldelta revisions : 3 merges : 0 ( 0.00%) normal : 3 (100.00%) revisions : 3 empty : 1 (33.33%) text : 1 (100.00%) delta : 0 ( 0.00%) snapshot : 2 (66.67%) lvl-0 : 2 (66.67%) deltas : 0 ( 0.00%) revision size : 88 snapshot : 88 (100.00%) lvl-0 : 88 (100.00%) deltas : 0 ( 0.00%) chunks : 3 empty : 1 (33.33%) 0x75 (u) : 2 (66.67%) chunks size : 88 empty : 0 ( 0.00%) 0x75 (u) : 88 (100.00%) avg chain length : 0 max chain length : 0 max chain reach : 44 compression ratio : 0 uncompressed data size (min/max/avg) : 0 / 43 / 28 full revision size (min/max/avg) : 44 / 44 / 44 inter-snapshot size (min/max/avg) : 0 / 0 / 0 delta size (min/max/avg) : 0 / 0 / 0 $ hg debugrevlog a format : 1 flags : inline, generaldelta revisions : 1 merges : 0 ( 0.00%) normal : 1 (100.00%) revisions : 1 empty : 0 ( 0.00%) text : 0 (100.00%) delta : 0 (100.00%) snapshot : 1 (100.00%) lvl-0 : 1 (100.00%) deltas : 0 ( 0.00%) revision size : 3 snapshot : 3 (100.00%) lvl-0 : 3 (100.00%) deltas : 0 ( 0.00%) chunks : 1 0x75 (u) : 1 (100.00%) chunks size : 3 0x75 (u) : 3 (100.00%) avg chain length : 0 max chain length : 0 max chain reach : 3 compression ratio : 0 uncompressed data size (min/max/avg) : 2 / 2 / 2 full revision size (min/max/avg) : 3 / 3 / 3 inter-snapshot size (min/max/avg) : 0 / 0 / 0 delta size (min/max/avg) : 0 / 0 / 0 #endif Test debugindex, with and without the --verbose/--debug flag $ hg debugrevlogindex a rev linkrev nodeid p1 p2 0 0 b789fdd96dc2 000000000000 000000000000 #if no-reposimplestore $ hg --verbose debugrevlogindex a rev offset length linkrev nodeid p1 p2 0 0 3 0 b789fdd96dc2 000000000000 000000000000 $ hg --debug debugrevlogindex a rev offset length linkrev nodeid p1 p2 0 0 3 0 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 #endif $ hg debugrevlogindex -f 1 a rev flag size link p1 p2 nodeid 0 0000 2 0 -1 -1 b789fdd96dc2 #if no-reposimplestore $ hg --verbose debugrevlogindex -f 1 a rev flag offset length size link p1 p2 nodeid 0 0000 0 3 2 0 -1 -1 b789fdd96dc2 $ hg --debug debugrevlogindex -f 1 a rev flag offset length size link p1 p2 nodeid 0 0000 0 3 2 0 -1 -1 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 #endif $ hg debugindex -c rev linkrev nodeid p1 p2 0 0 07f494440405 000000000000 000000000000 1 1 8cccb4b5fec2 07f494440405 000000000000 2 2 b1e228c512c5 8cccb4b5fec2 000000000000 $ hg debugindex -c --debug rev linkrev nodeid p1 p2 0 0 07f4944404050f47db2e5c5071e0e84e7a27bba9 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 1 1 8cccb4b5fec20cafeb99dd01c26d4dee8ea4388a 07f4944404050f47db2e5c5071e0e84e7a27bba9 0000000000000000000000000000000000000000 2 2 b1e228c512c5d7066d70562ed839c3323a62d6d2 8cccb4b5fec20cafeb99dd01c26d4dee8ea4388a 0000000000000000000000000000000000000000 $ hg debugindex -m rev linkrev nodeid p1 p2 0 0 a0c8bcbbb45c 000000000000 000000000000 1 1 57faf8a737ae a0c8bcbbb45c 000000000000 2 2 a35b10320954 57faf8a737ae 000000000000 $ hg debugindex -m --debug rev linkrev nodeid p1 p2 0 0 a0c8bcbbb45c63b90b70ad007bf38961f64f2af0 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 1 1 57faf8a737ae7faf490582941a82319ba6529dca a0c8bcbbb45c63b90b70ad007bf38961f64f2af0 0000000000000000000000000000000000000000 2 2 a35b103209548032201c16c7688cb2657f037a38 57faf8a737ae7faf490582941a82319ba6529dca 0000000000000000000000000000000000000000 $ hg debugindex a rev linkrev nodeid p1 p2 0 0 b789fdd96dc2 000000000000 000000000000 $ hg debugindex --debug a rev linkrev nodeid p1 p2 0 0 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000 debugdelta chain basic output #if reporevlogstore pure $ hg debugindexstats abort: debugindexstats only works with native code [255] #endif #if reporevlogstore no-pure $ hg debugindexstats node trie capacity: 4 node trie count: 2 node trie depth: 1 node trie last rev scanned: -1 node trie lookups: 4 node trie misses: 1 node trie splits: 1 revs in memory: 3 #endif #if reporevlogstore no-pure $ hg debugdeltachain -m rev chain# chainlen prev delta size rawsize chainsize ratio lindist extradist extraratio readsize largestblk rddensity srchunks 0 1 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1 1 2 1 -1 base 0 0 0 0.00000 0 0 0.00000 0 0 1.00000 1 2 3 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1 $ hg debugdeltachain -m -T '{rev} {chainid} {chainlen}\n' 0 1 1 1 2 1 2 3 1 $ hg debugdeltachain -m -Tjson [ { "chainid": 1, "chainlen": 1, "chainratio": 1.02325581395, (no-py3 !) "chainratio": 1.0232558139534884, (py3 !) "chainsize": 44, "compsize": 44, "deltatype": "base", "extradist": 0, "extraratio": 0.0, "largestblock": 44, "lindist": 44, "prevrev": -1, "readdensity": 1.0, "readsize": 44, "rev": 0, "srchunks": 1, "uncompsize": 43 }, { "chainid": 2, "chainlen": 1, "chainratio": 0, "chainsize": 0, "compsize": 0, "deltatype": "base", "extradist": 0, "extraratio": 0, "largestblock": 0, "lindist": 0, "prevrev": -1, "readdensity": 1, "readsize": 0, "rev": 1, "srchunks": 1, "uncompsize": 0 }, { "chainid": 3, "chainlen": 1, "chainratio": 1.02325581395, (no-py3 !) "chainratio": 1.0232558139534884, (py3 !) "chainsize": 44, "compsize": 44, "deltatype": "base", "extradist": 0, "extraratio": 0.0, "largestblock": 44, "lindist": 44, "prevrev": -1, "readdensity": 1.0, "readsize": 44, "rev": 2, "srchunks": 1, "uncompsize": 43 } ] debugdelta chain with sparse read enabled $ cat >> $HGRCPATH <<EOF > [experimental] > sparse-read = True > EOF $ hg debugdeltachain -m rev chain# chainlen prev delta size rawsize chainsize ratio lindist extradist extraratio readsize largestblk rddensity srchunks 0 1 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1 1 2 1 -1 base 0 0 0 0.00000 0 0 0.00000 0 0 1.00000 1 2 3 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1 $ hg debugdeltachain -m -T '{rev} {chainid} {chainlen} {readsize} {largestblock} {readdensity}\n' 0 1 1 44 44 1.0 1 2 1 0 0 1 2 3 1 44 44 1.0 $ hg debugdeltachain -m -Tjson [ { "chainid": 1, "chainlen": 1, "chainratio": 1.02325581395, (no-py3 !) "chainratio": 1.0232558139534884, (py3 !) "chainsize": 44, "compsize": 44, "deltatype": "base", "extradist": 0, "extraratio": 0.0, "largestblock": 44, "lindist": 44, "prevrev": -1, "readdensity": 1.0, "readsize": 44, "rev": 0, "srchunks": 1, "uncompsize": 43 }, { "chainid": 2, "chainlen": 1, "chainratio": 0, "chainsize": 0, "compsize": 0, "deltatype": "base", "extradist": 0, "extraratio": 0, "largestblock": 0, "lindist": 0, "prevrev": -1, "readdensity": 1, "readsize": 0, "rev": 1, "srchunks": 1, "uncompsize": 0 }, { "chainid": 3, "chainlen": 1, "chainratio": 1.02325581395, (no-py3 !) "chainratio": 1.0232558139534884, (py3 !) "chainsize": 44, "compsize": 44, "deltatype": "base", "extradist": 0, "extraratio": 0.0, "largestblock": 44, "lindist": 44, "prevrev": -1, "readdensity": 1.0, "readsize": 44, "rev": 2, "srchunks": 1, "uncompsize": 43 } ] $ printf "This test checks things.\n" >> a $ hg ci -m a $ hg branch other marked working directory as branch other (branches are permanent and global, did you want a bookmark?) $ for i in `$TESTDIR/seq.py 5`; do > printf "shorter ${i}" >> a > hg ci -m "a other:$i" > hg up -q default > printf "for the branch default we want longer chains: ${i}" >> a > hg ci -m "a default:$i" > hg up -q other > done $ hg debugdeltachain a -T '{rev} {srchunks}\n' \ > --config experimental.sparse-read.density-threshold=0.50 \ > --config experimental.sparse-read.min-gap-size=0 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 2 11 1 $ hg --config extensions.strip= strip --no-backup -r 1 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Test max chain len $ cat >> $HGRCPATH << EOF > [format] > maxchainlen=4 > EOF $ printf "This test checks if maxchainlen config value is respected also it can serve as basic test for debugrevlog -d <file>.\n" >> a $ hg ci -m a $ printf "b\n" >> a $ hg ci -m a $ printf "c\n" >> a $ hg ci -m a $ printf "d\n" >> a $ hg ci -m a $ printf "e\n" >> a $ hg ci -m a $ printf "f\n" >> a $ hg ci -m a $ printf 'g\n' >> a $ hg ci -m a $ printf 'h\n' >> a $ hg ci -m a $ hg debugrevlog -d a # rev p1rev p2rev start end deltastart base p1 p2 rawsize totalsize compression heads chainlen 0 -1 -1 0 ??? 0 0 0 0 ??? ???? ? 1 0 (glob) 1 0 -1 ??? ??? 0 0 0 0 ??? ???? ? 1 1 (glob) 2 1 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 2 (glob) 3 2 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 3 (glob) 4 3 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 4 (glob) 5 4 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 0 (glob) 6 5 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 1 (glob) 7 6 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 2 (glob) 8 7 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 3 (glob) #endif Test debuglocks command: $ hg debuglocks lock: free wlock: free * Test setting the lock waitlock <file> will wait for file to be created. If it isn't in a reasonable amount of time, displays error message and returns 1 $ waitlock() { > start=`date +%s` > timeout=5 > while [ \( ! -f $1 \) -a \( ! -L $1 \) ]; do > now=`date +%s` > if [ "`expr $now - $start`" -gt $timeout ]; then > echo "timeout: $1 was not created in $timeout seconds" > return 1 > fi > sleep 0.1 > done > } $ dolock() { > { > waitlock .hg/unlock > rm -f .hg/unlock > echo y > } | hg debuglocks "$@" > /dev/null > } $ dolock -s & $ waitlock .hg/store/lock $ hg debuglocks lock: user *, process * (*s) (glob) wlock: free [1] $ touch .hg/unlock $ wait $ [ -f .hg/store/lock ] || echo "There is no lock" There is no lock * Test setting the wlock $ dolock -S & $ waitlock .hg/wlock $ hg debuglocks lock: free wlock: user *, process * (*s) (glob) [1] $ touch .hg/unlock $ wait $ [ -f .hg/wlock ] || echo "There is no wlock" There is no wlock * Test setting both locks $ dolock -Ss & $ waitlock .hg/wlock && waitlock .hg/store/lock $ hg debuglocks lock: user *, process * (*s) (glob) wlock: user *, process * (*s) (glob) [2] * Test failing to set a lock $ hg debuglocks -s abort: lock is already held [255] $ hg debuglocks -S abort: wlock is already held [255] $ touch .hg/unlock $ wait $ hg debuglocks lock: free wlock: free * Test forcing the lock $ dolock -s & $ waitlock .hg/store/lock $ hg debuglocks lock: user *, process * (*s) (glob) wlock: free [1] $ hg debuglocks -L $ hg debuglocks lock: free wlock: free $ touch .hg/unlock $ wait * Test forcing the wlock $ dolock -S & $ waitlock .hg/wlock $ hg debuglocks lock: free wlock: user *, process * (*s) (glob) [1] $ hg debuglocks -W $ hg debuglocks lock: free wlock: free $ touch .hg/unlock $ wait Test WdirUnsupported exception $ hg debugdata -c ffffffffffffffffffffffffffffffffffffffff abort: working directory revision cannot be specified [255] Test cache warming command $ rm -rf .hg/cache/ $ hg debugupdatecaches --debug updating the branch cache $ ls -r .hg/cache/* .hg/cache/tags2-served .hg/cache/tags2 .hg/cache/rbc-revs-v1 .hg/cache/rbc-names-v1 .hg/cache/branch2-served Test debugcolor #if no-windows $ hg debugcolor --style --color always | egrep 'mode|style|log\.' color mode: 'ansi' available style: \x1b[0;33mlog.changeset\x1b[0m: \x1b[0;33myellow\x1b[0m (esc) #endif $ hg debugcolor --style --color never color mode: None available style: $ cd .. Test internal debugstacktrace command $ cat > debugstacktrace.py << EOF > from __future__ import absolute_import > from mercurial import ( > pycompat, > util, > ) > def f(): > util.debugstacktrace(f=pycompat.stdout) > g() > def g(): > util.dst(b'hello from g\\n', skip=1) > h() > def h(): > util.dst(b'hi ...\\nfrom h hidden in g', 1, depth=2) > f() > EOF $ "$PYTHON" debugstacktrace.py stacktrace at: debugstacktrace.py:14 in * (glob) debugstacktrace.py:7 in f hello from g at: debugstacktrace.py:14 in * (glob) debugstacktrace.py:8 in f hi ... from h hidden in g at: debugstacktrace.py:8 in f debugstacktrace.py:11 in g Test debugcapabilities command: $ hg debugcapabilities ./debugrevlog/ Main capabilities: branchmap $USUAL_BUNDLE2_CAPS$ getbundle known lookup pushkey unbundle Bundle2 capabilities: HG20 bookmarks changegroup 01 02 digests md5 sha1 sha512 error abort unsupportedcontent pushraced pushkey hgtagsfnodes listkeys phases heads pushkey remote-changegroup http https rev-branch-cache stream v2 Test debugpeer $ hg --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" debugpeer ssh://user@dummy/debugrevlog url: ssh://user@dummy/debugrevlog local: no pushable: yes $ hg --config ui.ssh="\"$PYTHON\" \"$TESTDIR/dummyssh\"" --debug debugpeer ssh://user@dummy/debugrevlog running "*" "*/tests/dummyssh" 'user@dummy' 'hg -R debugrevlog serve --stdio' (glob) (no-windows !) running "*" "*\tests/dummyssh" "user@dummy" "hg -R debugrevlog serve --stdio" (glob) (windows !) devel-peer-request: hello+between devel-peer-request: pairs: 81 bytes sending hello command sending between command remote: 440 remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash remote: 1 devel-peer-request: protocaps devel-peer-request: caps: * bytes (glob) sending protocaps command url: ssh://user@dummy/debugrevlog local: no pushable: yes