Mercurial > hg
view tests/test-rebase-abort.t @ 42044:bb271ec2fbfb
compression: introduce a `storage.revlog.zstd.level` configuration
This option control the zstd compression level used when compressing revlog
chunk. The usage of zstd for revlog compression has not graduated from
experimental yet, but we intend to fix that soon.
The option name for the compression level is more straight forward to pick, so
this changesets comes first. Having a dedicated option for each compression
engine is useful because they don't support the same range of values.
I ran the same measurement as for the zlib compression level (in the parent
changesets). The variation in repository size is stay mostly in the same (small)
range. The "read/write" performance see smallish variation, but are overall much
better than zlib. Write performance show the same tend of having better write
performance for when reaching high-end compression.
Again, we don't intend to change the default zstd compression level (currently:
3) in this series. However this is worth investigating in the future.
The Performance comparison of zlib vs zstd is quite impressive. The repository
size stay in the same range, but the performance are much better in all
situations.
Comparison summary
==================
We are looking at:
- performance range for zlib
- performance range for zstd
- comparison of default zstd (level-3) to default zlib (level 6)
- comparison of the slowest zstd time to the fastest zlib time
Read performance:
-----------------
| zlib | zstd | cmp | f2s
mercurial | 0.170159 - 0.189219 | 0.144127 - 0.149624 | 80% | 88%
pypy | 2.679217 - 2.768691 | 1.532317 - 1.705044 | 60% | 63%
netbeans | 122.477027 - 141.620281 | 72.996346 - 89.731560 | 58% | 73%
mozilla | 147.867662 - 170.572118 | 91.700995 - 105.853099 | 56% | 71%
Write performance:
------------------
| zlib | zstd | cmp | f2s
mercurial | 53.250304 - 56.2936129 | 40.877025 - 45.677286 | 75% | 86%
pypy | 460.721984 - 476.589918 | 270.545409 - 301.002219 | 63% | 65%
netbeans | 520.560316 - 715.930400 | 370.356311 - 428.329652 | 55% | 82%
mozilla | 739.803002 - 987.056093 | 505.152906 - 591.930683 | 57% | 80%
Raw data
--------
repo alg lvl .hg/store size 00manifest.d read write
mercurial zlib 1 49,402,813 5,963,475 0.170159 53.250304
mercurial zlib 6 47,197,397 5,875,730 0.182820 56.264320
mercurial zlib 9 47,121,596 5,849,781 0.189219 56.293612
mercurial zstd 1 49,737,084 5,966,355 0.144127 40.877025
mercurial zstd 3 48,961,867 5,895,208 0.146376 42.268142
mercurial zstd 5 48,200,592 5,938,676 0.149624 43.162875
mercurial zstd 10 47,833,520 5,913,353 0.145185 44.012489
mercurial zstd 15 47,314,604 5,728,679 0.147686 45.677286
mercurial zstd 20 47,330,502 5,830,539 0.145789 45.025407
mercurial zstd 22 47,330,076 5,830,539 0.143996 44.690460
pypy zlib 1 370,830,572 28,462,425 2.679217 460.721984
pypy zlib 6 340,112,317 27,648,747 2.768691 467.537158
pypy zlib 9 338,360,736 27,639,003 2.763495 476.589918
pypy zstd 1 362,377,479 27,916,214 1.532317 270.545409
pypy zstd 3 354,137,693 27,905,988 1.686718 294.951509
pypy zstd 5 342,640,043 27,655,774 1.705044 301.002219
pypy zstd 10 334,224,327 27,164,493 1.567287 285.186239
pypy zstd 15 329,000,363 26,645,965 1.637729 299.561332
pypy zstd 20 324,534,039 26,199,547 1.526813 302.149827
pypy zstd 22 324,530,595 26,198,932 1.525718 307.821218
netbeans zlib 1 1,281,847,810 165,495,457 122.477027 520.560316
netbeans zlib 6 1,205,284,353 159,161,207 139.876147 715.930400
netbeans zlib 9 1,197,135,671 155,034,586 141.620281 678.297064
netbeans zstd 1 1,259,581,737 160,840,613 72.996346 370.356311
netbeans zstd 3 1,232,978,122 157,691,551 81.622317 396.733087
netbeans zstd 5 1,208,034,075 160,246,880 83.080549 364.342626
netbeans zstd 10 1,188,624,176 156,083,417 79.323935 403.594602
netbeans zstd 15 1,176,973,589 153,859,477 89.731560 428.329652
netbeans zstd 20 1,162,958,258 151,147,535 82.842667 392.335349
netbeans zstd 22 1,162,707,029 151,150,220 82.565695 402.840655
mozilla zlib 1 2,775,497,186 298,527,987 147.867662 751.263721
mozilla zlib 6 2,596,856,420 286,597,671 170.572118 987.056093
mozilla zlib 9 2,587,542,494 287,018,264 163.622338 739.803002
mozilla zstd 1 2,723,159,348 286,617,532 91.700995 570.042751
mozilla zstd 3 2,665,055,001 286,152,013 95.240155 561.412805
mozilla zstd 5 2,607,819,817 288,060,030 101.978048 505.152906
mozilla zstd 10 2,558,761,085 283,967,648 104.113481 497.771202
mozilla zstd 15 2,526,216,060 275,581,300 105.853099 591.930683
mozilla zstd 20 2,485,114,806 266,478,859 95.268795 576.515389
mozilla zstd 22 2,484,869,080 266,456,505 94.429282 572.785537
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Wed, 27 Mar 2019 18:35:59 +0100 |
parents | 4edd427f34c1 |
children | b9bc47211cf5 |
line wrap: on
line source
$ cat >> $HGRCPATH <<EOF > [extensions] > rebase= > > [phases] > publish=False > > [alias] > tglog = log -G --template "{rev}:{phase} '{desc}' {branches}\n" > EOF $ hg init a $ cd a $ touch .hg/rebasestate $ hg sum parent: -1:000000000000 tip (empty repository) branch: default commit: (clean) update: (current) abort: .hg/rebasestate is incomplete [255] $ rm .hg/rebasestate $ echo c1 > common $ hg add common $ hg ci -m C1 $ echo c2 >> common $ hg ci -m C2 $ echo c3 >> common $ hg ci -m C3 $ hg up -q -C 1 $ echo l1 >> extra $ hg add extra $ hg ci -m L1 created new head $ sed -e 's/c2/l2/' common > common.new $ mv common.new common $ hg ci -m L2 $ hg phase --force --secret 2 $ hg tglog @ 4:draft 'L2' | o 3:draft 'L1' | | o 2:secret 'C3' |/ o 1:draft 'C2' | o 0:draft 'C1' Conflicting rebase: $ hg rebase -s 3 -d 2 rebasing 3:3163e20567cc "L1" rebasing 4:46f0b057b5c0 "L2" (tip) merging common warning: conflicts while merging common! (edit, then use 'hg resolve --mark') unresolved conflicts (see hg resolve, then hg rebase --continue) [1] Insert unsupported advisory merge record: $ hg --config extensions.fakemergerecord=$TESTDIR/fakemergerecord.py fakemergerecord -x $ hg debugmergestate * version 2 records local: 3e046f2ecedb793b97ed32108086edd1a162f8bc other: 46f0b057b5c061d276b91491c22151f78698abd2 labels: local: dest other: source unrecognized entry: x advisory record file extras: common (ancestorlinknode = 3163e20567cc93074fbb7a53c8b93312e59dbf2c) file: common (record type "F", state "u", hash 94c8c21d08740f5da9eaa38d1f175c592692f0d1) local path: common (flags "") ancestor path: common (node de0a666fdd9c1a0b0698b90d85064d8bd34f74b6) other path: common (node 2f6411de53677f6f1048fef5bf888d67a342e0a5) $ hg resolve -l U common Insert unsupported mandatory merge record: $ hg --config extensions.fakemergerecord=$TESTDIR/fakemergerecord.py fakemergerecord -X $ hg debugmergestate * version 2 records local: 3e046f2ecedb793b97ed32108086edd1a162f8bc other: 46f0b057b5c061d276b91491c22151f78698abd2 labels: local: dest other: source file extras: common (ancestorlinknode = 3163e20567cc93074fbb7a53c8b93312e59dbf2c) file: common (record type "F", state "u", hash 94c8c21d08740f5da9eaa38d1f175c592692f0d1) local path: common (flags "") ancestor path: common (node de0a666fdd9c1a0b0698b90d85064d8bd34f74b6) other path: common (node 2f6411de53677f6f1048fef5bf888d67a342e0a5) unrecognized entry: X mandatory record $ hg resolve -l abort: unsupported merge state records: X (see https://mercurial-scm.org/wiki/MergeStateRecords for more information) [255] $ hg resolve -ma abort: unsupported merge state records: X (see https://mercurial-scm.org/wiki/MergeStateRecords for more information) [255] Abort (should clear out unsupported merge state): $ hg rebase --abort saved backup bundle to $TESTTMP/a/.hg/strip-backup/3e046f2ecedb-6beef7d5-backup.hg rebase aborted $ hg debugmergestate no merge state found $ hg tglog @ 4:draft 'L2' | o 3:draft 'L1' | | o 2:secret 'C3' |/ o 1:draft 'C2' | o 0:draft 'C1' Test safety for inconsistent rebase state, which may be created (and forgotten) by Mercurial earlier than 2.7. This emulates Mercurial earlier than 2.7 by renaming ".hg/rebasestate" temporarily. $ hg rebase -s 3 -d 2 rebasing 3:3163e20567cc "L1" rebasing 4:46f0b057b5c0 "L2" (tip) merging common warning: conflicts while merging common! (edit, then use 'hg resolve --mark') unresolved conflicts (see hg resolve, then hg rebase --continue) [1] $ mv .hg/rebasestate .hg/rebasestate.back $ hg update --quiet --clean 2 $ hg --config extensions.mq= strip --quiet "destination()" $ mv .hg/rebasestate.back .hg/rebasestate $ hg rebase --continue abort: cannot continue inconsistent rebase (use "hg rebase --abort" to clear broken state) [255] $ hg summary | grep '^rebase: ' rebase: (use "hg rebase --abort" to clear broken state) $ hg rebase --abort rebase aborted (no revision is removed, only broken state is cleared) $ cd .. Construct new repo: $ hg init b $ cd b $ echo a > a $ hg ci -Am A adding a $ echo b > b $ hg ci -Am B adding b $ echo c > c $ hg ci -Am C adding c $ hg up -q 0 $ echo b > b $ hg ci -Am 'B bis' adding b created new head $ echo c1 > c $ hg ci -Am C1 adding c $ hg phase --force --secret 1 $ hg phase --public 1 Rebase and abort without generating new changesets: $ hg tglog @ 4:draft 'C1' | o 3:draft 'B bis' | | o 2:secret 'C' | | | o 1:public 'B' |/ o 0:public 'A' $ hg rebase -b 4 -d 2 rebasing 3:a6484957d6b9 "B bis" note: not rebasing 3:a6484957d6b9 "B bis", its destination already has all its changes rebasing 4:145842775fec "C1" (tip) merging c warning: conflicts while merging c! (edit, then use 'hg resolve --mark') unresolved conflicts (see hg resolve, then hg rebase --continue) [1] $ hg tglog @ 4:draft 'C1' | o 3:draft 'B bis' | | @ 2:secret 'C' | | | o 1:public 'B' |/ o 0:public 'A' $ hg rebase -a rebase aborted $ hg tglog @ 4:draft 'C1' | o 3:draft 'B bis' | | o 2:secret 'C' | | | o 1:public 'B' |/ o 0:public 'A' $ cd .. rebase abort should not leave working copy in a merge state if tip-1 is public (issue4082) $ hg init abortpublic $ cd abortpublic $ echo a > a && hg ci -Aqm a $ hg book master $ hg book foo $ echo b > b && hg ci -Aqm b $ hg up -q master $ echo c > c && hg ci -Aqm c $ hg phase -p -r . $ hg up -q foo $ echo C > c && hg ci -Aqm C $ hg log -G --template "{rev} {desc} {bookmarks}" @ 3 C foo | | o 2 c master | | o | 1 b |/ o 0 a $ hg rebase -d master -r foo rebasing 3:6c0f977a22d8 "C" (foo tip) merging c warning: conflicts while merging c! (edit, then use 'hg resolve --mark') unresolved conflicts (see hg resolve, then hg rebase --continue) [1] $ hg rebase --abort rebase aborted $ hg log -G --template "{rev} {desc} {bookmarks}" @ 3 C foo | | o 2 c master | | o | 1 b |/ o 0 a $ cd .. Make sure we don't clobber changes in the working directory when the user has somehow managed to update to a different revision (issue4009) $ hg init noupdate $ cd noupdate $ hg book @ $ echo original > a $ hg add a $ hg commit -m a $ echo x > b $ hg add b $ hg commit -m b1 $ hg up 0 0 files updated, 0 files merged, 1 files removed, 0 files unresolved (leaving bookmark @) $ hg book foo $ echo y > b $ hg add b $ hg commit -m b2 created new head $ hg rebase -d @ -b foo --tool=internal:fail rebasing 2:070cf4580bb5 "b2" (foo tip) unresolved conflicts (see hg resolve, then hg rebase --continue) [1] $ mv .hg/rebasestate ./ # so we're allowed to hg up like in mercurial <2.6.3 $ hg up -C 0 # user does other stuff in the repo 0 files updated, 0 files merged, 1 files removed, 0 files unresolved $ mv rebasestate .hg/ # user upgrades to 2.7 $ echo new > a $ hg up 1 # user gets an error saying to run hg rebase --abort abort: rebase in progress (use 'hg rebase --continue' or 'hg rebase --abort') [255] $ cat a new $ hg rebase --abort rebase aborted $ cat a new $ cd .. test aborting an interrupted series (issue5084) $ hg init interrupted $ cd interrupted $ touch base $ hg add base $ hg commit -m base $ touch a $ hg add a $ hg commit -m a $ echo 1 > a $ hg commit -m 1 $ touch b $ hg add b $ hg commit -m b $ echo 2 >> a $ hg commit -m c $ touch d $ hg add d $ hg commit -m d $ hg co -q 1 $ hg rm a $ hg commit -m no-a created new head $ hg co 0 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -G --template "{rev} {desc} {bookmarks}" o 6 no-a | | o 5 d | | | o 4 c | | | o 3 b | | | o 2 1 |/ o 1 a | @ 0 base $ hg --config extensions.n=$TESTDIR/failfilemerge.py rebase -s 3 -d tip rebasing 3:3a71550954f1 "b" rebasing 4:e80b69427d80 "c" abort: ^C [255] New operations are blocked with the correct state message $ find .hg -name '*state' -prune | sort .hg/dirstate .hg/merge/state .hg/rebasestate .hg/undo.backup.dirstate .hg/undo.dirstate .hg/updatestate $ hg rebase -s 3 -d tip abort: rebase in progress (use 'hg rebase --continue' or 'hg rebase --abort') [255] $ hg up . abort: rebase in progress (use 'hg rebase --continue' or 'hg rebase --abort') [255] $ hg up -C . abort: rebase in progress (use 'hg rebase --continue' or 'hg rebase --abort') [255] $ hg graft 3 abort: rebase in progress (use 'hg rebase --continue' or 'hg rebase --abort') [255] $ hg rebase --abort saved backup bundle to $TESTTMP/interrupted/.hg/strip-backup/3d8812cf300d-93041a90-backup.hg rebase aborted $ hg log -G --template "{rev} {desc} {bookmarks}" o 6 no-a | | o 5 d | | | o 4 c | | | o 3 b | | | o 2 1 |/ o 1 a | @ 0 base $ hg summary parent: 0:df4f53cec30a base branch: default commit: (clean) update: 6 new changesets (update) phases: 7 draft $ cd .. On the other hand, make sure we *do* clobber changes whenever we haven't somehow managed to update the repo to a different revision during a rebase (issue4661) $ hg ini yesupdate $ cd yesupdate $ echo "initial data" > foo.txt $ hg add adding foo.txt $ hg ci -m "initial checkin" $ echo "change 1" > foo.txt $ hg ci -m "change 1" $ hg up 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "conflicting change 1" > foo.txt $ hg ci -m "conflicting 1" created new head $ echo "conflicting change 2" > foo.txt $ hg ci -m "conflicting 2" $ hg rebase -d 1 --tool 'internal:fail' rebasing 2:e4ea5cdc9789 "conflicting 1" unresolved conflicts (see hg resolve, then hg rebase --continue) [1] $ hg rebase --abort rebase aborted $ hg summary parent: 3:b16646383533 tip conflicting 2 branch: default commit: (clean) update: 1 new changesets, 2 branch heads (merge) phases: 4 draft $ cd .. test aborting a rebase succeeds after rebasing with skipped commits onto a public changeset (issue4896) $ hg init succeedonpublic $ cd succeedonpublic $ echo 'content' > root $ hg commit -A -m 'root' -q set up public branch $ echo 'content' > disappear $ hg commit -A -m 'disappear public' -q commit will cause merge conflict on rebase $ echo '' > root $ hg commit -m 'remove content public' -q $ hg phase --public setup the draft branch that will be rebased onto public commit $ hg up -r 0 -q $ echo 'content' > disappear commit will disappear $ hg commit -A -m 'disappear draft' -q $ echo 'addedcontADDEDentadded' > root commit will cause merge conflict on rebase $ hg commit -m 'add content draft' -q $ hg rebase -d 'public()' --tool :merge -q note: not rebasing 3:0682fd3dabf5 "disappear draft", its destination already has all its changes warning: conflicts while merging root! (edit, then use 'hg resolve --mark') unresolved conflicts (see hg resolve, then hg rebase --continue) [1] $ hg rebase --abort rebase aborted $ cd ..