lfs: only hardlink between the usercache and local store if the blob verifies
This fixes the issue where verify (and other read commands) would propagate
corrupt blobs. I originalled coded this to only hardlink if 'verify=True' for
store.read(), but then good blobs weren't being linked, and this broke a bunch
of tests. (The blob in repo5 that is being corrupted seems to be linked into
repo5 in the loop running dumpflog.py prior to it being corrupted, but only if
verify=False is handled too.) It's probably better to do a one time extra
verification in order to create these files, so that the repo can be copied to a
removable drive.
Adding the same check to store.write() was only for completeness, but also needs
to do a one time extra verification to avoid breaking tests.
============================================
Testing obsolescence markers push: Cases A.6
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category A: simple cases
TestCase 6: new markers between changesets already known on both side
Variants:
# a: explicit push
# b: bare push
A.6 new markers between changesets already known on both side
==============================================================
.. {{{
.. A ◕⇠● B
.. |/
.. ● O
.. }}}
..
.. Marker exist from:
..
.. * `A◕⇠● B`
..
.. Command runs:
..
.. * hg push -r B
.. * hg push
..
.. Expected exchange:
..
.. * `A◕⇠● B`
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos A.6
creating test repo for test case A.6
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ hg update -q 0
$ mkcommit A1
created new head
make both changeset known in remote
$ hg push -qf ../pushdest
$ hg push -qf ../pulldest
create a marker after this
$ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
obsoleted 1 changesets
$ hg log -G --hidden
@ e5ea8f9c7314 (draft): A1
|
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
$ cp -R A.6 A.6.a
$ cp -R A.6 A.6.b
Actual Test (explicit push version)
-----------------------------------
$ dotest A.6.a A1
## Running testcase A.6.a
# testing echange of "A1" (e5ea8f9c7314)
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "A1" from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
remote: obsoleted 1 changesets
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "e5ea8f9c7314" from main into pulldest
pulling from main
no changes found
1 new obsolescence markers
obsoleted 1 changesets
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
Actual Test (bare push version)
-------------------------------
$ dotest A.6.b
## Running testcase A.6.b
## initial state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing from main to pushdest
pushing to pushdest
searching for changes
no changes found
remote: 1 new obsolescence markers
remote: obsoleted 1 changesets
## post push state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling from main into pulldest
pulling from main
searching for changes
no changes found
1 new obsolescence markers
obsoleted 1 changesets
## post pull state
# obstore: main
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}