view hgext/largefiles/uisetup.py @ 35503:bbcd2e478391

test-lfs: add tests covering http exchanges

This tries to test every combination of having the extension enabled/disabled
on each side, and then push/pull/clone/identify lfs and non-lfs content.  SSH is
ignored here, because there's enough going on as it is.

The root issue here is again that requirements are not exchanged and preserved
on push/pull/clone.  Doing so should eliminate the cryptic error messages when
using `hg serve`.  The 500 server error is triggered by "ValueError: no common
changegroup version", because the extension forces changegroup3.  Or, if
changegroup3 is enabled manually, it is triggered by "abort: missing processor
for flag '0x2000'!".

Sadly, run-tests.py doesn't support conditionalizing the exit code like it does
lines of output.  Therefore, a couple of tests blot out the exit code by
appending "|| true", since these failures will go away shortly anyway.

# Copyright 2009-2010 Gregory P. Ward
# Copyright 2009-2010 Intelerad Medical Systems Incorporated
# Copyright 2010-2011 Fog Creek Software
# Copyright 2010-2011 Unity Technologies
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''setup for largefiles extension: uisetup'''
from __future__ import absolute_import

from mercurial.i18n import _

from mercurial.hgweb import (
    hgweb_mod,
    webcommands,
)

from mercurial import (
    archival,
    cmdutil,
    commands,
    copies,
    exchange,
    extensions,
    filemerge,
    hg,
    httppeer,
    merge,
    scmutil,
    sshpeer,
    subrepo,
    upgrade,
    wireproto,
)

from . import (
    overrides,
    proto,
)

def uisetup(ui):
    # Disable auto-status for some commands which assume that all
    # files in the result are under Mercurial's control

    entry = extensions.wrapcommand(commands.table, 'add',
                                   overrides.overrideadd)
    addopt = [('', 'large', None, _('add as largefile')),
              ('', 'normal', None, _('add as normal file')),
              ('', 'lfsize', '', _('add all files above this size '
                                   '(in megabytes) as largefiles '
                                   '(default: 10)'))]
    entry[1].extend(addopt)

    # The scmutil function is called both by the (trivial) addremove command,
    # and in the process of handling commit -A (issue3542)
    extensions.wrapfunction(scmutil, 'addremove', overrides.scmutiladdremove)
    extensions.wrapfunction(cmdutil, 'add', overrides.cmdutiladd)
    extensions.wrapfunction(cmdutil, 'remove', overrides.cmdutilremove)
    extensions.wrapfunction(cmdutil, 'forget', overrides.cmdutilforget)

    extensions.wrapfunction(copies, 'pathcopies', overrides.copiespathcopies)

    extensions.wrapfunction(upgrade, 'preservedrequirements',
                            overrides.upgraderequirements)

    extensions.wrapfunction(upgrade, 'supporteddestrequirements',
                            overrides.upgraderequirements)

    # Subrepos call status function
    entry = extensions.wrapcommand(commands.table, 'status',
                                   overrides.overridestatus)
    extensions.wrapfunction(subrepo.hgsubrepo, 'status',
                            overrides.overridestatusfn)

    entry = extensions.wrapcommand(commands.table, 'log',
                                   overrides.overridelog)
    entry = extensions.wrapcommand(commands.table, 'rollback',
                                   overrides.overriderollback)
    entry = extensions.wrapcommand(commands.table, 'verify',
                                   overrides.overrideverify)

    verifyopt = [('', 'large', None,
                  _('verify that all largefiles in current revision exists')),
                 ('', 'lfa', None,
                  _('verify largefiles in all revisions, not just current')),
                 ('', 'lfc', None,
                  _('verify local largefile contents, not just existence'))]
    entry[1].extend(verifyopt)

    entry = extensions.wrapcommand(commands.table, 'debugstate',
                                   overrides.overridedebugstate)
    debugstateopt = [('', 'large', None, _('display largefiles dirstate'))]
    entry[1].extend(debugstateopt)

    outgoing = lambda orgfunc, *arg, **kwargs: orgfunc(*arg, **kwargs)
    entry = extensions.wrapcommand(commands.table, 'outgoing', outgoing)
    outgoingopt = [('', 'large', None, _('display outgoing largefiles'))]
    entry[1].extend(outgoingopt)
    cmdutil.outgoinghooks.add('largefiles', overrides.outgoinghook)
    entry = extensions.wrapcommand(commands.table, 'summary',
                                   overrides.overridesummary)
    summaryopt = [('', 'large', None, _('display outgoing largefiles'))]
    entry[1].extend(summaryopt)
    cmdutil.summaryremotehooks.add('largefiles', overrides.summaryremotehook)

    entry = extensions.wrapcommand(commands.table, 'pull',
                                   overrides.overridepull)
    pullopt = [('', 'all-largefiles', None,
                 _('download all pulled versions of largefiles (DEPRECATED)')),
               ('', 'lfrev', [],
                _('download largefiles for these revisions'), _('REV'))]
    entry[1].extend(pullopt)

    entry = extensions.wrapcommand(commands.table, 'push',
                                   overrides.overridepush)
    pushopt = [('', 'lfrev', [],
                _('upload largefiles for these revisions'), _('REV'))]
    entry[1].extend(pushopt)
    extensions.wrapfunction(exchange, 'pushoperation',
                            overrides.exchangepushoperation)

    entry = extensions.wrapcommand(commands.table, 'clone',
                                   overrides.overrideclone)
    cloneopt = [('', 'all-largefiles', None,
                 _('download all versions of all largefiles'))]
    entry[1].extend(cloneopt)
    extensions.wrapfunction(hg, 'clone', overrides.hgclone)
    extensions.wrapfunction(hg, 'postshare', overrides.hgpostshare)

    entry = extensions.wrapcommand(commands.table, 'cat',
                                   overrides.overridecat)
    extensions.wrapfunction(merge, '_checkunknownfile',
                            overrides.overridecheckunknownfile)
    extensions.wrapfunction(merge, 'calculateupdates',
                            overrides.overridecalculateupdates)
    extensions.wrapfunction(merge, 'recordupdates',
                            overrides.mergerecordupdates)
    extensions.wrapfunction(merge, 'update', overrides.mergeupdate)
    extensions.wrapfunction(filemerge, '_filemerge',
                            overrides.overridefilemerge)
    extensions.wrapfunction(cmdutil, 'copy', overrides.overridecopy)

    # Summary calls dirty on the subrepos
    extensions.wrapfunction(subrepo.hgsubrepo, 'dirty', overrides.overridedirty)

    extensions.wrapfunction(cmdutil, 'revert', overrides.overriderevert)

    extensions.wrapcommand(commands.table, 'archive',
                           overrides.overridearchivecmd)
    extensions.wrapfunction(archival, 'archive', overrides.overridearchive)
    extensions.wrapfunction(subrepo.hgsubrepo, 'archive',
                            overrides.hgsubrepoarchive)
    extensions.wrapfunction(webcommands, 'archive', overrides.hgwebarchive)
    extensions.wrapfunction(cmdutil, 'bailifchanged',
                            overrides.overridebailifchanged)

    extensions.wrapfunction(cmdutil, 'postcommitstatus',
                            overrides.postcommitstatus)
    extensions.wrapfunction(scmutil, 'marktouched',
                            overrides.scmutilmarktouched)

    # create the new wireproto commands ...
    wireproto.commands['putlfile'] = (proto.putlfile, 'sha')
    wireproto.commands['getlfile'] = (proto.getlfile, 'sha')
    wireproto.commands['statlfile'] = (proto.statlfile, 'sha')

    # ... and wrap some existing ones
    wireproto.commands['capabilities'] = (proto.capabilities, '')
    wireproto.commands['heads'] = (proto.heads, '')
    wireproto.commands['lheads'] = (wireproto.heads, '')

    # make putlfile behave the same as push and {get,stat}lfile behave
    # the same as pull w.r.t. permissions checks
    hgweb_mod.perms['putlfile'] = 'push'
    hgweb_mod.perms['getlfile'] = 'pull'
    hgweb_mod.perms['statlfile'] = 'pull'

    extensions.wrapfunction(webcommands, 'decodepath', overrides.decodepath)

    # the hello wireproto command uses wireproto.capabilities, so it won't see
    # our largefiles capability unless we replace the actual function as well.
    proto.capabilitiesorig = wireproto.capabilities
    wireproto.capabilities = proto.capabilities

    # can't do this in reposetup because it needs to have happened before
    # wirerepo.__init__ is called
    proto.ssholdcallstream = sshpeer.sshpeer._callstream
    proto.httpoldcallstream = httppeer.httppeer._callstream
    sshpeer.sshpeer._callstream = proto.sshrepocallstream
    httppeer.httppeer._callstream = proto.httprepocallstream

    # override some extensions' stuff as well
    for name, module in extensions.extensions():
        if name == 'purge':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'purge',
                overrides.overridepurge)
        if name == 'rebase':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'rebase',
                overrides.overriderebase)
            extensions.wrapfunction(module, 'rebase',
                                    overrides.overriderebase)
        if name == 'transplant':
            extensions.wrapcommand(getattr(module, 'cmdtable'), 'transplant',
                overrides.overridetransplant)