test-lfs: add tests covering http exchanges
This tries to test every combination of having the extension enabled/disabled
on each side, and then push/pull/clone/identify lfs and non-lfs content. SSH is
ignored here, because there's enough going on as it is.
The root issue here is again that requirements are not exchanged and preserved
on push/pull/clone. Doing so should eliminate the cryptic error messages when
using `hg serve`. The 500 server error is triggered by "ValueError: no common
changegroup version", because the extension forces changegroup3. Or, if
changegroup3 is enabled manually, it is triggered by "abort: missing processor
for flag '0x2000'!".
Sadly, run-tests.py doesn't support conditionalizing the exit code like it does
lines of output. Therefore, a couple of tests blot out the exit code by
appending "|| true", since these failures will go away shortly anyway.
#testcases lfsremote-on lfsremote-off
#require serve
This test splits `hg serve` with and without using the extension into separate
tests cases. The tests are broken down as follows, where "LFS"/"No-LFS"
indicates whether or not there are commits that use an LFS file, and "D"/"E"
indicates whether or not the extension is loaded. The "X" cases are not tested
individually, because the lfs requirement causes the process to bail early if
the extension is disabled.
. Server
.
. No-LFS LFS
. +----------------------------+
. | || D | E | D | E |
. |---++=======================|
. C | D || N/A | #1 | X | #4 |
. l No +---++-----------------------|
. i LFS | E || #2 | #2 | X | #5 |
. e +---++-----------------------|
. n | D || X | X | X | X |
. t LFS |---++-----------------------|
. | E || #3 | #3 | X | #6 |
. |---++-----------------------+
$ hg init server
$ SERVER_REQUIRES="$TESTTMP/server/.hg/requires"
Skip the experimental.changegroup3=True config. Failure to agree on this comes
first, and causes a "ValueError: no common changegroup version" or "abort:
HTTP Error 500: Internal Server Error", if the extension is only loaded on one
side. If that *is* enabled, the subsequent failure is "abort: missing processor
for flag '0x2000'!" if the extension is only loaded on one side (possibly also
masked by the Internal Server Error message).
$ cat >> $HGRCPATH <<EOF
> [lfs]
> url=file:$TESTTMP/dummy-remote/
> threshold=10
> [web]
> allow_push=*
> push_ssl=False
> EOF
#if lfsremote-on
$ hg --config extensions.lfs= -R server \
> serve -p $HGPORT -d --pid-file=hg.pid --errorlog=$TESTTMP/errors.log
#else
$ hg --config extensions.lfs=! -R server \
> serve -p $HGPORT -d --pid-file=hg.pid --errorlog=$TESTTMP/errors.log
#endif
$ cat hg.pid >> $DAEMON_PIDS
$ hg clone -q http://localhost:$HGPORT client
$ grep 'lfs' client/.hg/requires $SERVER_REQUIRES
[1]
--------------------------------------------------------------------------------
Case #1: client with non-lfs content and the extension disabled; server with
non-lfs content, and the extension enabled.
$ cd client
$ echo 'non-lfs' > nonlfs.txt
$ hg ci -Aqm 'non-lfs'
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
[1]
#if lfsremote-on
$ hg push -q
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
[1]
TODO: fail more gracefully, or don't mandate changegroup3 for non-lfs repos.
$ hg clone -q http://localhost:$HGPORT $TESTTMP/client1_clone
abort: HTTP Error 500: Internal Server Error
[255]
$ grep 'lfs' $TESTTMP/client1_clone/.hg/requires $SERVER_REQUIRES
grep: $TESTTMP/client1_clone/.hg/requires: $ENOENT$
[2]
TODO: fail more gracefully, or don't mandate changegroup3 for non-lfs repos.
$ hg init $TESTTMP/client1_pull
$ hg -R $TESTTMP/client1_pull pull -q http://localhost:$HGPORT
abort: HTTP Error 500: Internal Server Error
[255]
$ grep 'lfs' $TESTTMP/client1_pull/.hg/requires $SERVER_REQUIRES
[1]
$ hg identify http://localhost:$HGPORT
d437e1d24fbd
#endif
--------------------------------------------------------------------------------
Case #2: client with non-lfs content and the extension enabled; server with
non-lfs content, and the extension state controlled by #testcases.
$ cat >> $HGRCPATH <<EOF
> [extensions]
> lfs =
> EOF
$ echo 'non-lfs' > nonlfs2.txt
$ hg ci -Aqm 'non-lfs file with lfs client'
TODO: fail more gracefully here
$ hg push -q 2>&1 | grep '^[A-Z]' || true
Traceback (most recent call last): (lfsremote-off !)
ValueError: no common changegroup version (lfsremote-off !)
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
[1]
$ hg clone -q http://localhost:$HGPORT $TESTTMP/client2_clone
$ grep 'lfs' $TESTTMP/client2_clone/.hg/requires $SERVER_REQUIRES
[1]
$ hg init $TESTTMP/client2_pull
$ hg -R $TESTTMP/client2_pull pull -q http://localhost:$HGPORT
$ grep 'lfs' $TESTTMP/client2_pull/.hg/requires $SERVER_REQUIRES
[1]
XXX: The difference here is the push failed above when the extension isn't
enabled on the server. The extension shouldn't need to mess with changegroup
versions if there is no lfs content. But the requirement needs to be
consistently added before that can be ratcheted back.
$ hg identify http://localhost:$HGPORT
1477875038c6 (lfsremote-on !)
000000000000 (lfsremote-off !)
--------------------------------------------------------------------------------
Case #3: client with lfs content and the extension enabled; server with
non-lfs content, and the extension state controlled by #testcases.
TODO: add the 'lfs' requirement on the server for each test in lfsremote-on
$ echo 'this is a big lfs file' > lfs.bin
$ hg ci -Aqm 'lfs'
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
.hg/requires:lfs
TODO: fail more gracefully here
$ hg push -q 2>&1 | grep '^[A-Z]' || true
Traceback (most recent call last): (lfsremote-off !)
ValueError: no common changegroup version (lfsremote-off !)
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
.hg/requires:lfs
$ hg clone -q http://localhost:$HGPORT $TESTTMP/client3_clone
$ grep 'lfs' $TESTTMP/client3_clone/.hg/requires $SERVER_REQUIRES
[1]
$ hg init $TESTTMP/client3_pull
$ hg -R $TESTTMP/client3_pull pull -q http://localhost:$HGPORT
$ grep 'lfs' $TESTTMP/client3_pull/.hg/requires $SERVER_REQUIRES
[1]
XXX: The difference here is the push failed above when the extension isn't
enabled on the server. The extension shouldn't need to mess with changegroup
versions if there is no lfs content. But the requirement needs to be
consistently added before that can be ratcheted back.
$ hg identify http://localhost:$HGPORT
8374dc4052cb (lfsremote-on !)
000000000000 (lfsremote-off !)
Don't bother testing the lfsremote-off cases- the server won't be able
to launch if there's lfs content and the extension is disabled.
#if lfsremote-on
--------------------------------------------------------------------------------
Case #4: client with non-lfs content and the extension disabled; server with
lfs content, and the extension enabled.
$ cat >> $HGRCPATH <<EOF
> [extensions]
> lfs = !
> EOF
$ hg init $TESTTMP/client4
$ cd $TESTTMP/client4
$ cat >> .hg/hgrc <<EOF
> [paths]
> default = http://localhost:$HGPORT
> EOF
$ echo 'non-lfs' > nonlfs2.txt
$ hg ci -Aqm 'non-lfs'
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
[1]
$ hg push -q --force
warning: repository is unrelated
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
[1]
TODO: fail more gracefully.
$ hg clone -q http://localhost:$HGPORT $TESTTMP/client4_clone
abort: HTTP Error 500: Internal Server Error
[255]
$ grep 'lfs' $TESTTMP/client4_clone/.hg/requires $SERVER_REQUIRES
grep: $TESTTMP/client4_clone/.hg/requires: $ENOENT$
[2]
TODO: fail more gracefully.
$ hg init $TESTTMP/client4_pull
$ hg -R $TESTTMP/client4_pull pull -q http://localhost:$HGPORT
abort: HTTP Error 500: Internal Server Error
[255]
$ grep 'lfs' $TESTTMP/client4_pull/.hg/requires $SERVER_REQUIRES
[1]
$ hg identify http://localhost:$HGPORT
03b080fa9d93
--------------------------------------------------------------------------------
Case #5: client with non-lfs content and the extension enabled; server with
lfs content, and the extension enabled.
$ cat >> $HGRCPATH <<EOF
> [extensions]
> lfs =
> EOF
$ echo 'non-lfs' > nonlfs3.txt
$ hg ci -Aqm 'non-lfs file with lfs client'
$ hg push -q
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
[1]
$ hg clone -q http://localhost:$HGPORT $TESTTMP/client5_clone
$ grep 'lfs' $TESTTMP/client5_clone/.hg/requires $SERVER_REQUIRES
[1]
$ hg init $TESTTMP/client5_pull
$ hg -R $TESTTMP/client5_pull pull -q http://localhost:$HGPORT
$ grep 'lfs' $TESTTMP/client5_pull/.hg/requires $SERVER_REQUIRES
[1]
$ hg identify http://localhost:$HGPORT
c729025cc5e3
--------------------------------------------------------------------------------
Case #6: client with lfs content and the extension enabled; server with
lfs content, and the extension enabled.
TODO: add the 'lfs' requirement on the server for each test
$ echo 'this is another lfs file' > lfs2.txt
$ hg ci -Aqm 'lfs file with lfs client'
$ hg push -q
$ grep 'lfs' .hg/requires $SERVER_REQUIRES
.hg/requires:lfs
$ hg clone -q http://localhost:$HGPORT $TESTTMP/client6_clone
$ grep 'lfs' $TESTTMP/client6_clone/.hg/requires $SERVER_REQUIRES
[1]
$ hg init $TESTTMP/client6_pull
$ hg -R $TESTTMP/client6_pull pull -q http://localhost:$HGPORT
$ grep 'lfs' $TESTTMP/client6_pull/.hg/requires $SERVER_REQUIRES
[1]
$ hg identify http://localhost:$HGPORT
d3b84d50eacb
--------------------------------------------------------------------------------
Misc: process dies early if a requirement exists and the extension is disabled
$ hg --config extensions.lfs=! summary
abort: repository requires features unknown to this Mercurial: lfs!
(see https://mercurial-scm.org/wiki/MissingRequirement for more information)
[255]
#endif
$ $PYTHON $TESTDIR/killdaemons.py $DAEMON_PIDS
#if lfsremote-on
$ cat $TESTTMP/errors.log | grep '^[A-Z]'
Traceback (most recent call last):
ValueError: no common changegroup version
Traceback (most recent call last):
ValueError: no common changegroup version
Traceback (most recent call last):
ValueError: no common changegroup version
Traceback (most recent call last):
ValueError: no common changegroup version
#else
$ cat $TESTTMP/errors.log
#endif