tests/test-paths.t

debugcommands: allow sending of simple commands with debugwireproto

Previously, we only had support for low-level "raw" operations.

A goal of `hg debugwireproto` is to allow easily performing
higher-level primitives, such as sending a wire protocol command
and reading its response.

We implement a "command" action that does just this.

Currently, we only support simple commands (those without payloads).
We have basic support for sending command arguments. We don't yet
support sending dictionary arguments. This will be implemented later.

To prove it works, we add tests to test-ssh-proto.t that send some
"listkeys" commands.

Note: we don't observe/report os.read() events because these may not be
deterministic. We instead observe/report the read() and readline()
operations on the bufferedinputpipe. These *should* be deterministic.

Differential Revision: https://phab.mercurial-scm.org/D2406

  $ hg init a
  $ hg clone a b
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd a

with no paths:

  $ hg paths
  $ hg paths unknown
  not found!
  [1]
  $ hg paths -Tjson
  [
  ]

with paths:

  $ echo '[paths]' >> .hg/hgrc
  $ echo 'dupe = ../b#tip' >> .hg/hgrc
  $ echo 'expand = $SOMETHING/bar' >> .hg/hgrc
  $ hg in dupe
  comparing with $TESTTMP/b
  no changes found
  [1]
  $ cd ..
  $ hg -R a in dupe
  comparing with $TESTTMP/b
  no changes found
  [1]
  $ cd a
  $ hg paths
  dupe = $TESTTMP/b#tip
  expand = $TESTTMP/a/$SOMETHING/bar
  $ SOMETHING=foo hg paths
  dupe = $TESTTMP/b#tip
  expand = $TESTTMP/a/foo/bar
#if msys
  $ SOMETHING=//foo hg paths
  dupe = $TESTTMP/b#tip
  expand = /foo/bar
#else
  $ SOMETHING=/foo hg paths
  dupe = $TESTTMP/b#tip
  expand = /foo/bar
#endif
  $ hg paths -q
  dupe
  expand
  $ hg paths dupe
  $TESTTMP/b#tip
  $ hg paths -q dupe
  $ hg paths unknown
  not found!
  [1]
  $ hg paths -q unknown
  [1]

formatter output with paths:

  $ echo 'dupe:pushurl = https://example.com/dupe' >> .hg/hgrc
  $ hg paths -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "name": "dupe",
    "pushurl": "https://example.com/dupe",
    "url": "$TESTTMP/b#tip"
   },
   {
    "name": "expand",
    "url": "$TESTTMP/a/$SOMETHING/bar"
   }
  ]
  $ hg paths -Tjson dupe | sed 's|\\\\|\\|g'
  [
   {
    "name": "dupe",
    "pushurl": "https://example.com/dupe",
    "url": "$TESTTMP/b#tip"
   }
  ]
  $ hg paths -Tjson -q unknown
  [
  ]
  [1]

log template:

 (behaves as a {name: path-string} dict by default)

  $ hg log -rnull -T '{peerurls}\n'
  dupe=$TESTTMP/b#tip expand=$TESTTMP/a/$SOMETHING/bar
  $ hg log -rnull -T '{join(peerurls, "\n")}\n'
  dupe=$TESTTMP/b#tip
  expand=$TESTTMP/a/$SOMETHING/bar
  $ hg log -rnull -T '{peerurls % "{name}: {url}\n"}'
  dupe: $TESTTMP/b#tip
  expand: $TESTTMP/a/$SOMETHING/bar
  $ hg log -rnull -T '{get(peerurls, "dupe")}\n'
  $TESTTMP/b#tip

 (sub options can be populated by map/dot operation)

  $ hg log -rnull \
  > -T '{get(peerurls, "dupe") % "url: {url}\npushurl: {pushurl}\n"}'
  url: $TESTTMP/b#tip
  pushurl: https://example.com/dupe
  $ hg log -rnull -T '{peerurls.dupe.pushurl}\n'
  https://example.com/dupe

 (in JSON, it's a dict of urls)

  $ hg log -rnull -T '{peerurls|json}\n' | sed 's|\\\\|/|g'
  {"dupe": "$TESTTMP/b#tip", "expand": "$TESTTMP/a/$SOMETHING/bar"}

password should be masked in plain output, but not in machine-readable/template
output:

  $ echo 'insecure = http://foo:[e-mail]/' >> .hg/hgrc
  $ hg paths insecure
  http://foo:***@example.com/
  $ hg paths -Tjson insecure
  [
   {
    "name": "insecure",
    "url": "http://foo:[e-mail]/"
   }
  ]
  $ hg log -rnull -T '{get(peerurls, "insecure")}\n'
  http://foo:[e-mail]/

zeroconf wraps ui.configitems(), which shouldn't crash at least:

  $ hg paths --config extensions.zeroconf=
  dupe = $TESTTMP/b#tip
  dupe:pushurl = https://example.com/dupe
  expand = $TESTTMP/a/$SOMETHING/bar
  insecure = http://foo:***@example.com/

  $ cd ..

sub-options for an undeclared path are ignored

  $ hg init suboptions
  $ cd suboptions

  $ cat > .hg/hgrc << EOF
  > [paths]
  > path0 = https://example.com/path0
  > path1:pushurl = https://example.com/path1
  > EOF
  $ hg paths
  path0 = https://example.com/path0

unknown sub-options aren't displayed

  $ cat > .hg/hgrc << EOF
  > [paths]
  > path0 = https://example.com/path0
  > path0:foo = https://example.com/path1
  > EOF

  $ hg paths
  path0 = https://example.com/path0

:pushurl must be a URL

  $ cat > .hg/hgrc << EOF
  > [paths]
  > default = /path/to/nothing
  > default:pushurl = /not/a/url
  > EOF

  $ hg paths
  (paths.default:pushurl not a URL; ignoring)
  default = /path/to/nothing

#fragment is not allowed in :pushurl

  $ cat > .hg/hgrc << EOF
  > [paths]
  > default = https://example.com/repo
  > invalid = https://example.com/repo
  > invalid:pushurl = https://example.com/repo#branch
  > EOF

  $ hg paths
  ("#fragment" in paths.invalid:pushurl not supported; ignoring)
  default = https://example.com/repo
  invalid = https://example.com/repo
  invalid:pushurl = https://example.com/repo

  $ cd ..

'file:' disables [paths] entries for clone destination

  $ cat >> $HGRCPATH <<EOF
  > [paths]
  > gpath1 = http://hg.example.com
  > EOF

  $ hg clone a gpath1
  abort: cannot create new http repository
  [255]

  $ hg clone a file:gpath1
  updating to branch default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd gpath1
  $ hg -q id
  000000000000

  $ cd ..