view mercurial/mail.py @ 38732:be4984261611

merge: mark file gets as not thread safe (issue5933)

In default installs, this has the effect of disabling the thread-based
worker on Windows when manifesting files in the working directory. My
measurements have shown that with revlog-based repositories, Mercurial
spends a lot of CPU time in revlog code resolving file data. This ends
up incurring a lot of context switching across threads and slows down
`hg update` operations when going from an empty working directory to
the tip of the repo.

On mozilla-unified (246,351 files) on an i7-6700K (4+4 CPUs):

before: 487s wall
after:  360s wall (equivalent to worker.enabled=false)
cpus=2: 379s wall

Even with only 2 threads, the thread pool is still slower.

The introduction of the thread-based worker (02b36e860e0b) states that
it resulted in a "~50%" speedup for `hg sparse --enable-profile` and
`hg sparse --disable-profile`. This disagrees with my measurement
above. I theorize a few reasons for this:

1) Removal of files from the working directory is I/O - not CPU - bound
   and should benefit from a thread pool (unless I/O is insanely fast
   and the GIL release is near instantaneous). So tests like `hg sparse
   --enable-profile` may exercise deletion throughput and aren't good
   benchmarks for worker tasks that are CPU heavy.
2) The patch was authored by someone at Facebook. The results were
   likely measured against a repository using remotefilelog. And I
   believe that revision retrieval during working directory updates with
   remotefilelog will often use a remote store, thus being I/O and not
   CPU bound. This probably resulted in an overstated performance gain.

Since there appears to be a need to enable the thread-based worker with
some stores, I've made the flagging of file gets as thread safe
configurable. I've made it experimental because I don't want to formalize
a boolean flag for this option and because this attribute is best
captured against the store implementation. But we don't have a proper
store API for this yet. I'd rather cross this bridge later.

It is possible there are revlog-based repositories that do benefit from
a thread-based worker. I didn't do very comprehensive testing. If there
are, we may want to devise a more proper algorithm for whether to use
the thread-based worker, including possibly config options to limit the
number of threads to use. But until I see evidence that justifies
complexity, simplicity wins.

Differential Revision: https://phab.mercurial-scm.org/D3963

# mail.py - mail sending bits for mercurial
#
# Copyright 2006 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import email
import email.charset
import email.header
import email.message
import email.parser
import io
import os
import smtplib
import socket
import time

from .i18n import _
from . import (
    encoding,
    error,
    pycompat,
    sslutil,
    util,
)
from .utils import (
    procutil,
    stringutil,
)

class STARTTLS(smtplib.SMTP):
    '''Derived class to verify the peer certificate for STARTTLS.

    This class allows to pass any keyword arguments to SSL socket creation.
    '''
    def __init__(self, ui, host=None, **kwargs):
        smtplib.SMTP.__init__(self, **kwargs)
        self._ui = ui
        self._host = host

    def starttls(self, keyfile=None, certfile=None):
        if not self.has_extn("starttls"):
            msg = "STARTTLS extension not supported by server"
            raise smtplib.SMTPException(msg)
        (resp, reply) = self.docmd("STARTTLS")
        if resp == 220:
            self.sock = sslutil.wrapsocket(self.sock, keyfile, certfile,
                                           ui=self._ui,
                                           serverhostname=self._host)
            self.file = smtplib.SSLFakeFile(self.sock)
            self.helo_resp = None
            self.ehlo_resp = None
            self.esmtp_features = {}
            self.does_esmtp = 0
        return (resp, reply)

class SMTPS(smtplib.SMTP):
    '''Derived class to verify the peer certificate for SMTPS.

    This class allows to pass any keyword arguments to SSL socket creation.
    '''
    def __init__(self, ui, keyfile=None, certfile=None, host=None,
                 **kwargs):
        self.keyfile = keyfile
        self.certfile = certfile
        smtplib.SMTP.__init__(self, **kwargs)
        self._host = host
        self.default_port = smtplib.SMTP_SSL_PORT
        self._ui = ui

    def _get_socket(self, host, port, timeout):
        if self.debuglevel > 0:
            self._ui.debug('connect: %r\n' % (host, port))
        new_socket = socket.create_connection((host, port), timeout)
        new_socket = sslutil.wrapsocket(new_socket,
                                        self.keyfile, self.certfile,
                                        ui=self._ui,
                                        serverhostname=self._host)
        self.file = smtplib.SSLFakeFile(new_socket)
        return new_socket

def _smtp(ui):
    '''build an smtp connection and return a function to send mail'''
    local_hostname = ui.config('smtp', 'local_hostname')
    tls = ui.config('smtp', 'tls')
    # backward compatible: when tls = true, we use starttls.
    starttls = tls == 'starttls' or stringutil.parsebool(tls)
    smtps = tls == 'smtps'
    if (starttls or smtps) and not util.safehasattr(socket, 'ssl'):
        raise error.Abort(_("can't use TLS: Python SSL support not installed"))
    mailhost = ui.config('smtp', 'host')
    if not mailhost:
        raise error.Abort(_('smtp.host not configured - cannot send mail'))
    if smtps:
        ui.note(_('(using smtps)\n'))
        s = SMTPS(ui, local_hostname=local_hostname, host=mailhost)
    elif starttls:
        s = STARTTLS(ui, local_hostname=local_hostname, host=mailhost)
    else:
        s = smtplib.SMTP(local_hostname=local_hostname)
    if smtps:
        defaultport = 465
    else:
        defaultport = 25
    mailport = util.getport(ui.config('smtp', 'port', defaultport))
    ui.note(_('sending mail: smtp host %s, port %d\n') %
            (mailhost, mailport))
    s.connect(host=mailhost, port=mailport)
    if starttls:
        ui.note(_('(using starttls)\n'))
        s.ehlo()
        s.starttls()
        s.ehlo()
    if starttls or smtps:
        ui.note(_('(verifying remote certificate)\n'))
        sslutil.validatesocket(s.sock)
    username = ui.config('smtp', 'username')
    password = ui.config('smtp', 'password')
    if username and not password:
        password = ui.getpass()
    if username and password:
        ui.note(_('(authenticating to mail server as %s)\n') %
                  (username))
        try:
            s.login(username, password)
        except smtplib.SMTPException as inst:
            raise error.Abort(inst)

    def send(sender, recipients, msg):
        try:
            return s.sendmail(sender, recipients, msg)
        except smtplib.SMTPRecipientsRefused as inst:
            recipients = [r[1] for r in inst.recipients.values()]
            raise error.Abort('\n' + '\n'.join(recipients))
        except smtplib.SMTPException as inst:
            raise error.Abort(inst)

    return send

def _sendmail(ui, sender, recipients, msg):
    '''send mail using sendmail.'''
    program = ui.config('email', 'method')
    cmdline = '%s -f %s %s' % (program, stringutil.email(sender),
                               ' '.join(map(stringutil.email, recipients)))
    ui.note(_('sending mail: %s\n') % cmdline)
    fp = procutil.popen(cmdline, 'wb')
    fp.write(util.tonativeeol(msg))
    ret = fp.close()
    if ret:
        raise error.Abort('%s %s' % (
            os.path.basename(program.split(None, 1)[0]),
            procutil.explainexit(ret)))

def _mbox(mbox, sender, recipients, msg):
    '''write mails to mbox'''
    fp = open(mbox, 'ab+')
    # Should be time.asctime(), but Windows prints 2-characters day
    # of month instead of one. Make them print the same thing.
    date = time.strftime(r'%a %b %d %H:%M:%S %Y', time.localtime())
    fp.write('From %s %s\n' % (sender, date))
    fp.write(msg)
    fp.write('\n\n')
    fp.close()

def connect(ui, mbox=None):
    '''make a mail connection. return a function to send mail.
    call as sendmail(sender, list-of-recipients, msg).'''
    if mbox:
        open(mbox, 'wb').close()
        return lambda s, r, m: _mbox(mbox, s, r, m)
    if ui.config('email', 'method') == 'smtp':
        return _smtp(ui)
    return lambda s, r, m: _sendmail(ui, s, r, m)

def sendmail(ui, sender, recipients, msg, mbox=None):
    send = connect(ui, mbox=mbox)
    return send(sender, recipients, msg)

def validateconfig(ui):
    '''determine if we have enough config data to try sending email.'''
    method = ui.config('email', 'method')
    if method == 'smtp':
        if not ui.config('smtp', 'host'):
            raise error.Abort(_('smtp specified as email transport, '
                               'but no smtp host configured'))
    else:
        if not procutil.findexe(method):
            raise error.Abort(_('%r specified as email transport, '
                               'but not in PATH') % method)

def codec2iana(cs):
    ''''''
    cs = pycompat.sysbytes(email.charset.Charset(cs).input_charset.lower())

    # "latin1" normalizes to "iso8859-1", standard calls for "iso-8859-1"
    if cs.startswith("iso") and not cs.startswith("iso-"):
        return "iso-" + cs[3:]
    return cs

def mimetextpatch(s, subtype='plain', display=False):
    '''Return MIME message suitable for a patch.
    Charset will be detected by first trying to decode as us-ascii, then utf-8,
    and finally the global encodings. If all those fail, fall back to
    ISO-8859-1, an encoding with that allows all byte sequences.
    Transfer encodings will be used if necessary.'''

    cs = ['us-ascii', 'utf-8', encoding.encoding, encoding.fallbackencoding]
    if display:
        return mimetextqp(s, subtype, 'us-ascii')
    for charset in cs:
        try:
            s.decode(pycompat.sysstr(charset))
            return mimetextqp(s, subtype, codec2iana(charset))
        except UnicodeDecodeError:
            pass

    return mimetextqp(s, subtype, "iso-8859-1")

def mimetextqp(body, subtype, charset):
    '''Return MIME message.
    Quoted-printable transfer encoding will be used if necessary.
    '''
    cs = email.charset.Charset(charset)
    msg = email.message.Message()
    msg.set_type(pycompat.sysstr('text/' + subtype))

    for line in body.splitlines():
        if len(line) > 950:
            cs.body_encoding = email.charset.QP
            break

    msg.set_payload(body, cs)

    return msg

def _charsets(ui):
    '''Obtains charsets to send mail parts not containing patches.'''
    charsets = [cs.lower() for cs in ui.configlist('email', 'charsets')]
    fallbacks = [encoding.fallbackencoding.lower(),
                 encoding.encoding.lower(), 'utf-8']
    for cs in fallbacks: # find unique charsets while keeping order
        if cs not in charsets:
            charsets.append(cs)
    return [cs for cs in charsets if not cs.endswith('ascii')]

def _encode(ui, s, charsets):
    '''Returns (converted) string, charset tuple.
    Finds out best charset by cycling through sendcharsets in descending
    order. Tries both encoding and fallbackencoding for input. Only as
    last resort send as is in fake ascii.
    Caveat: Do not use for mail parts containing patches!'''
    try:
        s.decode('ascii')
    except UnicodeDecodeError:
        sendcharsets = charsets or _charsets(ui)
        for ics in (encoding.encoding, encoding.fallbackencoding):
            try:
                u = s.decode(ics)
            except UnicodeDecodeError:
                continue
            for ocs in sendcharsets:
                try:
                    return u.encode(ocs), ocs
                except UnicodeEncodeError:
                    pass
                except LookupError:
                    ui.warn(_('ignoring invalid sendcharset: %s\n') % ocs)
    # if ascii, or all conversion attempts fail, send (broken) ascii
    return s, 'us-ascii'

def headencode(ui, s, charsets=None, display=False):
    '''Returns RFC-2047 compliant header from given string.'''
    if not display:
        # split into words?
        s, cs = _encode(ui, s, charsets)
        return str(email.header.Header(s, cs))
    return s

def _addressencode(ui, name, addr, charsets=None):
    name = headencode(ui, name, charsets)
    try:
        acc, dom = addr.split('@')
        acc = acc.encode('ascii')
        dom = dom.decode(encoding.encoding).encode('idna')
        addr = '%s@%s' % (acc, dom)
    except UnicodeDecodeError:
        raise error.Abort(_('invalid email address: %s') % addr)
    except ValueError:
        try:
            # too strict?
            addr = addr.encode('ascii')
        except UnicodeDecodeError:
            raise error.Abort(_('invalid local address: %s') % addr)
    return email.utils.formataddr((name, addr))

def addressencode(ui, address, charsets=None, display=False):
    '''Turns address into RFC-2047 compliant header.'''
    if display or not address:
        return address or ''
    name, addr = email.utils.parseaddr(address)
    return _addressencode(ui, name, addr, charsets)

def addrlistencode(ui, addrs, charsets=None, display=False):
    '''Turns a list of addresses into a list of RFC-2047 compliant headers.
    A single element of input list may contain multiple addresses, but output
    always has one address per item'''
    if display:
        return [a.strip() for a in addrs if a.strip()]

    result = []
    for name, addr in email.utils.getaddresses(addrs):
        if name or addr:
            result.append(_addressencode(ui, name, addr, charsets))
    return result

def mimeencode(ui, s, charsets=None, display=False):
    '''creates mime text object, encodes it if needed, and sets
    charset and transfer-encoding accordingly.'''
    cs = 'us-ascii'
    if not display:
        s, cs = _encode(ui, s, charsets)
    return mimetextqp(s, 'plain', cs)

if pycompat.ispy3:
    def parse(fp):
        ep = email.parser.Parser()
        # disable the "universal newlines" mode, which isn't binary safe.
        # I have no idea if ascii/surrogateescape is correct, but that's
        # what the standard Python email parser does.
        fp = io.TextIOWrapper(fp, encoding=r'ascii',
                              errors=r'surrogateescape', newline=chr(10))
        try:
            return ep.parse(fp)
        finally:
            fp.detach()
else:
    def parse(fp):
        ep = email.parser.Parser()
        return ep.parse(fp)

def headdecode(s):
    '''Decodes RFC-2047 header'''
    uparts = []
    for part, charset in email.header.decode_header(s):
        if charset is not None:
            try:
                uparts.append(part.decode(charset))
                continue
            except UnicodeDecodeError:
                pass
        # On Python 3, decode_header() may return either bytes or unicode
        # depending on whether the header has =?<charset>? or not
        if isinstance(part, type(u'')):
            uparts.append(part)
            continue
        try:
            uparts.append(part.decode('UTF-8'))
            continue
        except UnicodeDecodeError:
            pass
        uparts.append(part.decode('ISO-8859-1'))
    return encoding.unitolocal(u' '.join(uparts))