Mercurial > hg
view mercurial/pathutil.py @ 38732:be4984261611
merge: mark file gets as not thread safe (issue5933)
In default installs, this has the effect of disabling the thread-based
worker on Windows when manifesting files in the working directory. My
measurements have shown that with revlog-based repositories, Mercurial
spends a lot of CPU time in revlog code resolving file data. This ends
up incurring a lot of context switching across threads and slows down
`hg update` operations when going from an empty working directory to
the tip of the repo.
On mozilla-unified (246,351 files) on an i7-6700K (4+4 CPUs):
before: 487s wall
after: 360s wall (equivalent to worker.enabled=false)
cpus=2: 379s wall
Even with only 2 threads, the thread pool is still slower.
The introduction of the thread-based worker (02b36e860e0b) states that
it resulted in a "~50%" speedup for `hg sparse --enable-profile` and
`hg sparse --disable-profile`. This disagrees with my measurement
above. I theorize a few reasons for this:
1) Removal of files from the working directory is I/O - not CPU - bound
and should benefit from a thread pool (unless I/O is insanely fast
and the GIL release is near instantaneous). So tests like `hg sparse
--enable-profile` may exercise deletion throughput and aren't good
benchmarks for worker tasks that are CPU heavy.
2) The patch was authored by someone at Facebook. The results were
likely measured against a repository using remotefilelog. And I
believe that revision retrieval during working directory updates with
remotefilelog will often use a remote store, thus being I/O and not
CPU bound. This probably resulted in an overstated performance gain.
Since there appears to be a need to enable the thread-based worker with
some stores, I've made the flagging of file gets as thread safe
configurable. I've made it experimental because I don't want to formalize
a boolean flag for this option and because this attribute is best
captured against the store implementation. But we don't have a proper
store API for this yet. I'd rather cross this bridge later.
It is possible there are revlog-based repositories that do benefit from
a thread-based worker. I didn't do very comprehensive testing. If there
are, we may want to devise a more proper algorithm for whether to use
the thread-based worker, including possibly config options to limit the
number of threads to use. But until I see evidence that justifies
complexity, simplicity wins.
Differential Revision: https://phab.mercurial-scm.org/D3963
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Wed, 18 Jul 2018 09:49:34 -0700 |
parents | 21be76e07148 |
children | 2372284d9457 |
line wrap: on
line source
from __future__ import absolute_import import errno import os import posixpath import stat from .i18n import _ from . import ( encoding, error, pycompat, util, ) def _lowerclean(s): return encoding.hfsignoreclean(s.lower()) class pathauditor(object): '''ensure that a filesystem path contains no banned components. the following properties of a path are checked: - ends with a directory separator - under top-level .hg - starts at the root of a windows drive - contains ".." More check are also done about the file system states: - traverses a symlink (e.g. a/symlink_here/b) - inside a nested repository (a callback can be used to approve some nested repositories, e.g., subrepositories) The file system checks are only done when 'realfs' is set to True (the default). They should be disable then we are auditing path for operation on stored history. If 'cached' is set to True, audited paths and sub-directories are cached. Be careful to not keep the cache of unmanaged directories for long because audited paths may be replaced with symlinks. ''' def __init__(self, root, callback=None, realfs=True, cached=False): self.audited = set() self.auditeddir = set() self.root = root self._realfs = realfs self._cached = cached self.callback = callback if os.path.lexists(root) and not util.fscasesensitive(root): self.normcase = util.normcase else: self.normcase = lambda x: x def __call__(self, path, mode=None): '''Check the relative path. path may contain a pattern (e.g. foodir/**.txt)''' path = util.localpath(path) normpath = self.normcase(path) if normpath in self.audited: return # AIX ignores "/" at end of path, others raise EISDIR. if util.endswithsep(path): raise error.Abort(_("path ends in directory separator: %s") % path) parts = util.splitpath(path) if (os.path.splitdrive(path)[0] or _lowerclean(parts[0]) in ('.hg', '.hg.', '') or pycompat.ospardir in parts): raise error.Abort(_("path contains illegal component: %s") % path) # Windows shortname aliases for p in parts: if "~" in p: first, last = p.split("~", 1) if last.isdigit() and first.upper() in ["HG", "HG8B6C"]: raise error.Abort(_("path contains illegal component: %s") % path) if '.hg' in _lowerclean(path): lparts = [_lowerclean(p.lower()) for p in parts] for p in '.hg', '.hg.': if p in lparts[1:]: pos = lparts.index(p) base = os.path.join(*parts[:pos]) raise error.Abort(_("path '%s' is inside nested repo %r") % (path, pycompat.bytestr(base))) normparts = util.splitpath(normpath) assert len(parts) == len(normparts) parts.pop() normparts.pop() prefixes = [] # It's important that we check the path parts starting from the root. # This means we won't accidentally traverse a symlink into some other # filesystem (which is potentially expensive to access). for i in range(len(parts)): prefix = pycompat.ossep.join(parts[:i + 1]) normprefix = pycompat.ossep.join(normparts[:i + 1]) if normprefix in self.auditeddir: continue if self._realfs: self._checkfs(prefix, path) prefixes.append(normprefix) if self._cached: self.audited.add(normpath) # only add prefixes to the cache after checking everything: we don't # want to add "foo/bar/baz" before checking if there's a "foo/.hg" self.auditeddir.update(prefixes) def _checkfs(self, prefix, path): """raise exception if a file system backed check fails""" curpath = os.path.join(self.root, prefix) try: st = os.lstat(curpath) except OSError as err: # EINVAL can be raised as invalid path syntax under win32. # They must be ignored for patterns can be checked too. if err.errno not in (errno.ENOENT, errno.ENOTDIR, errno.EINVAL): raise else: if stat.S_ISLNK(st.st_mode): msg = (_('path %r traverses symbolic link %r') % (pycompat.bytestr(path), pycompat.bytestr(prefix))) raise error.Abort(msg) elif (stat.S_ISDIR(st.st_mode) and os.path.isdir(os.path.join(curpath, '.hg'))): if not self.callback or not self.callback(curpath): msg = _("path '%s' is inside nested repo %r") raise error.Abort(msg % (path, pycompat.bytestr(prefix))) def check(self, path): try: self(path) return True except (OSError, error.Abort): return False def canonpath(root, cwd, myname, auditor=None): '''return the canonical path of myname, given cwd and root >>> def check(root, cwd, myname): ... a = pathauditor(root, realfs=False) ... try: ... return canonpath(root, cwd, myname, a) ... except error.Abort: ... return 'aborted' >>> def unixonly(root, cwd, myname, expected='aborted'): ... if pycompat.iswindows: ... return expected ... return check(root, cwd, myname) >>> def winonly(root, cwd, myname, expected='aborted'): ... if not pycompat.iswindows: ... return expected ... return check(root, cwd, myname) >>> winonly(b'd:\\\\repo', b'c:\\\\dir', b'filename') 'aborted' >>> winonly(b'c:\\\\repo', b'c:\\\\dir', b'filename') 'aborted' >>> winonly(b'c:\\\\repo', b'c:\\\\', b'filename') 'aborted' >>> winonly(b'c:\\\\repo', b'c:\\\\', b'repo\\\\filename', ... b'filename') 'filename' >>> winonly(b'c:\\\\repo', b'c:\\\\repo', b'filename', b'filename') 'filename' >>> winonly(b'c:\\\\repo', b'c:\\\\repo\\\\subdir', b'filename', ... b'subdir/filename') 'subdir/filename' >>> unixonly(b'/repo', b'/dir', b'filename') 'aborted' >>> unixonly(b'/repo', b'/', b'filename') 'aborted' >>> unixonly(b'/repo', b'/', b'repo/filename', b'filename') 'filename' >>> unixonly(b'/repo', b'/repo', b'filename', b'filename') 'filename' >>> unixonly(b'/repo', b'/repo/subdir', b'filename', b'subdir/filename') 'subdir/filename' ''' if util.endswithsep(root): rootsep = root else: rootsep = root + pycompat.ossep name = myname if not os.path.isabs(name): name = os.path.join(root, cwd, name) name = os.path.normpath(name) if auditor is None: auditor = pathauditor(root) if name != rootsep and name.startswith(rootsep): name = name[len(rootsep):] auditor(name) return util.pconvert(name) elif name == root: return '' else: # Determine whether `name' is in the hierarchy at or beneath `root', # by iterating name=dirname(name) until that causes no change (can't # check name == '/', because that doesn't work on windows). The list # `rel' holds the reversed list of components making up the relative # file name we want. rel = [] while True: try: s = util.samefile(name, root) except OSError: s = False if s: if not rel: # name was actually the same as root (maybe a symlink) return '' rel.reverse() name = os.path.join(*rel) auditor(name) return util.pconvert(name) dirname, basename = util.split(name) rel.append(basename) if dirname == name: break name = dirname # A common mistake is to use -R, but specify a file relative to the repo # instead of cwd. Detect that case, and provide a hint to the user. hint = None try: if cwd != root: canonpath(root, root, myname, auditor) relpath = util.pathto(root, cwd, '') if relpath.endswith(pycompat.ossep): relpath = relpath[:-1] hint = (_("consider using '--cwd %s'") % relpath) except error.Abort: pass raise error.Abort(_("%s not under root '%s'") % (myname, root), hint=hint) def normasprefix(path): '''normalize the specified path as path prefix Returned value can be used safely for "p.startswith(prefix)", "p[len(prefix):]", and so on. For efficiency, this expects "path" argument to be already normalized by "os.path.normpath", "os.path.realpath", and so on. See also issue3033 for detail about need of this function. >>> normasprefix(b'/foo/bar').replace(pycompat.ossep, b'/') '/foo/bar/' >>> normasprefix(b'/').replace(pycompat.ossep, b'/') '/' ''' d, p = os.path.splitdrive(path) if len(p) != len(pycompat.ossep): return path + pycompat.ossep else: return path # forward two methods from posixpath that do what we need, but we'd # rather not let our internals know that we're thinking in posix terms # - instead we'll let them be oblivious. join = posixpath.join dirname = posixpath.dirname