Mercurial > hg
view mercurial/changegroup.py @ 22678:bf0b5bfc24b9
tag: properly abort if an unknown or ignored .hgtags is present
This was a regression introduced by 4faaa0535ea7 in 2008.
author | Matt Mackall <mpm@selenic.com> |
---|---|
date | Thu, 02 Oct 2014 18:37:12 -0500 |
parents | e2806b8613ca |
children | 7c13c9404c2c |
line wrap: on
line source
# changegroup.py - Mercurial changegroup manipulation functions # # Copyright 2006 Matt Mackall <mpm@selenic.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. import weakref from i18n import _ from node import nullrev, nullid, hex, short import mdiff, util, dagutil import struct, os, bz2, zlib, tempfile import discovery, error, phases, branchmap _CHANGEGROUPV1_DELTA_HEADER = "20s20s20s20s" def readexactly(stream, n): '''read n bytes from stream.read and abort if less was available''' s = stream.read(n) if len(s) < n: raise util.Abort(_("stream ended unexpectedly" " (got %d bytes, expected %d)") % (len(s), n)) return s def getchunk(stream): """return the next chunk from stream as a string""" d = readexactly(stream, 4) l = struct.unpack(">l", d)[0] if l <= 4: if l: raise util.Abort(_("invalid chunk length %d") % l) return "" return readexactly(stream, l - 4) def chunkheader(length): """return a changegroup chunk header (string)""" return struct.pack(">l", length + 4) def closechunk(): """return a changegroup chunk header (string) for a zero-length chunk""" return struct.pack(">l", 0) class nocompress(object): def compress(self, x): return x def flush(self): return "" bundletypes = { "": ("", nocompress), # only when using unbundle on ssh and old http servers # since the unification ssh accepts a header but there # is no capability signaling it. "HG10UN": ("HG10UN", nocompress), "HG10BZ": ("HG10", lambda: bz2.BZ2Compressor()), "HG10GZ": ("HG10GZ", lambda: zlib.compressobj()), } # hgweb uses this list to communicate its preferred type bundlepriority = ['HG10GZ', 'HG10BZ', 'HG10UN'] def writebundle(cg, filename, bundletype, vfs=None): """Write a bundle file and return its filename. Existing files will not be overwritten. If no filename is specified, a temporary file is created. bz2 compression can be turned off. The bundle file will be deleted in case of errors. """ fh = None cleanup = None try: if filename: if vfs: fh = vfs.open(filename, "wb") else: fh = open(filename, "wb") else: fd, filename = tempfile.mkstemp(prefix="hg-bundle-", suffix=".hg") fh = os.fdopen(fd, "wb") cleanup = filename header, compressor = bundletypes[bundletype] fh.write(header) z = compressor() # parse the changegroup data, otherwise we will block # in case of sshrepo because we don't know the end of the stream # an empty chunkgroup is the end of the changegroup # a changegroup has at least 2 chunkgroups (changelog and manifest). # after that, an empty chunkgroup is the end of the changegroup for chunk in cg.getchunks(): fh.write(z.compress(chunk)) fh.write(z.flush()) cleanup = None return filename finally: if fh is not None: fh.close() if cleanup is not None: if filename and vfs: vfs.unlink(cleanup) else: os.unlink(cleanup) def decompressor(fh, alg): if alg == 'UN': return fh elif alg == 'GZ': def generator(f): zd = zlib.decompressobj() for chunk in util.filechunkiter(f): yield zd.decompress(chunk) elif alg == 'BZ': def generator(f): zd = bz2.BZ2Decompressor() zd.decompress("BZ") for chunk in util.filechunkiter(f, 4096): yield zd.decompress(chunk) else: raise util.Abort("unknown bundle compression '%s'" % alg) return util.chunkbuffer(generator(fh)) class cg1unpacker(object): deltaheader = _CHANGEGROUPV1_DELTA_HEADER deltaheadersize = struct.calcsize(deltaheader) def __init__(self, fh, alg): self._stream = decompressor(fh, alg) self._type = alg self.callback = None def compressed(self): return self._type != 'UN' def read(self, l): return self._stream.read(l) def seek(self, pos): return self._stream.seek(pos) def tell(self): return self._stream.tell() def close(self): return self._stream.close() def chunklength(self): d = readexactly(self._stream, 4) l = struct.unpack(">l", d)[0] if l <= 4: if l: raise util.Abort(_("invalid chunk length %d") % l) return 0 if self.callback: self.callback() return l - 4 def changelogheader(self): """v10 does not have a changelog header chunk""" return {} def manifestheader(self): """v10 does not have a manifest header chunk""" return {} def filelogheader(self): """return the header of the filelogs chunk, v10 only has the filename""" l = self.chunklength() if not l: return {} fname = readexactly(self._stream, l) return {'filename': fname} def _deltaheader(self, headertuple, prevnode): node, p1, p2, cs = headertuple if prevnode is None: deltabase = p1 else: deltabase = prevnode return node, p1, p2, deltabase, cs def deltachunk(self, prevnode): l = self.chunklength() if not l: return {} headerdata = readexactly(self._stream, self.deltaheadersize) header = struct.unpack(self.deltaheader, headerdata) delta = readexactly(self._stream, l - self.deltaheadersize) node, p1, p2, deltabase, cs = self._deltaheader(header, prevnode) return {'node': node, 'p1': p1, 'p2': p2, 'cs': cs, 'deltabase': deltabase, 'delta': delta} def getchunks(self): """returns all the chunks contains in the bundle Used when you need to forward the binary stream to a file or another network API. To do so, it parse the changegroup data, otherwise it will block in case of sshrepo because it don't know the end of the stream. """ # an empty chunkgroup is the end of the changegroup # a changegroup has at least 2 chunkgroups (changelog and manifest). # after that, an empty chunkgroup is the end of the changegroup empty = False count = 0 while not empty or count <= 2: empty = True count += 1 while True: chunk = getchunk(self) if not chunk: break empty = False yield chunkheader(len(chunk)) pos = 0 while pos < len(chunk): next = pos + 2**20 yield chunk[pos:next] pos = next yield closechunk() class headerlessfixup(object): def __init__(self, fh, h): self._h = h self._fh = fh def read(self, n): if self._h: d, self._h = self._h[:n], self._h[n:] if len(d) < n: d += readexactly(self._fh, n - len(d)) return d return readexactly(self._fh, n) class cg1packer(object): deltaheader = _CHANGEGROUPV1_DELTA_HEADER def __init__(self, repo, bundlecaps=None): """Given a source repo, construct a bundler. bundlecaps is optional and can be used to specify the set of capabilities which can be used to build the bundle. """ # Set of capabilities we can use to build the bundle. if bundlecaps is None: bundlecaps = set() self._bundlecaps = bundlecaps self._changelog = repo.changelog self._manifest = repo.manifest reorder = repo.ui.config('bundle', 'reorder', 'auto') if reorder == 'auto': reorder = None else: reorder = util.parsebool(reorder) self._repo = repo self._reorder = reorder self._progress = repo.ui.progress def close(self): return closechunk() def fileheader(self, fname): return chunkheader(len(fname)) + fname def group(self, nodelist, revlog, lookup, units=None, reorder=None): """Calculate a delta group, yielding a sequence of changegroup chunks (strings). Given a list of changeset revs, return a set of deltas and metadata corresponding to nodes. The first delta is first parent(nodelist[0]) -> nodelist[0], the receiver is guaranteed to have this parent as it has all history before these changesets. In the case firstparent is nullrev the changegroup starts with a full revision. If units is not None, progress detail will be generated, units specifies the type of revlog that is touched (changelog, manifest, etc.). """ # if we don't have any revisions touched by these changesets, bail if len(nodelist) == 0: yield self.close() return # for generaldelta revlogs, we linearize the revs; this will both be # much quicker and generate a much smaller bundle if (revlog._generaldelta and reorder is not False) or reorder: dag = dagutil.revlogdag(revlog) revs = set(revlog.rev(n) for n in nodelist) revs = dag.linearize(revs) else: revs = sorted([revlog.rev(n) for n in nodelist]) # add the parent of the first rev p = revlog.parentrevs(revs[0])[0] revs.insert(0, p) # build deltas total = len(revs) - 1 msgbundling = _('bundling') for r in xrange(len(revs) - 1): if units is not None: self._progress(msgbundling, r + 1, unit=units, total=total) prev, curr = revs[r], revs[r + 1] linknode = lookup(revlog.node(curr)) for c in self.revchunk(revlog, curr, prev, linknode): yield c yield self.close() # filter any nodes that claim to be part of the known set def prune(self, revlog, missing, commonrevs, source): rr, rl = revlog.rev, revlog.linkrev return [n for n in missing if rl(rr(n)) not in commonrevs] def generate(self, commonrevs, clnodes, fastpathlinkrev, source): '''yield a sequence of changegroup chunks (strings)''' repo = self._repo cl = self._changelog mf = self._manifest reorder = self._reorder progress = self._progress # for progress output msgbundling = _('bundling') mfs = {} # needed manifests fnodes = {} # needed file nodes changedfiles = set() # Callback for the changelog, used to collect changed files and manifest # nodes. # Returns the linkrev node (identity in the changelog case). def lookupcl(x): c = cl.read(x) changedfiles.update(c[3]) # record the first changeset introducing this manifest version mfs.setdefault(c[0], x) return x # Callback for the manifest, used to collect linkrevs for filelog # revisions. # Returns the linkrev node (collected in lookupcl). def lookupmf(x): clnode = mfs[x] if not fastpathlinkrev: mdata = mf.readfast(x) for f, n in mdata.iteritems(): if f in changedfiles: # record the first changeset introducing this filelog # version fnodes[f].setdefault(n, clnode) return clnode for chunk in self.group(clnodes, cl, lookupcl, units=_('changesets'), reorder=reorder): yield chunk progress(msgbundling, None) for f in changedfiles: fnodes[f] = {} mfnodes = self.prune(mf, mfs, commonrevs, source) for chunk in self.group(mfnodes, mf, lookupmf, units=_('manifests'), reorder=reorder): yield chunk progress(msgbundling, None) mfs.clear() needed = set(cl.rev(x) for x in clnodes) def linknodes(filerevlog, fname): if fastpathlinkrev: llr = filerevlog.linkrev def genfilenodes(): for r in filerevlog: linkrev = llr(r) if linkrev in needed: yield filerevlog.node(r), cl.node(linkrev) fnodes[fname] = dict(genfilenodes()) return fnodes.get(fname, {}) for chunk in self.generatefiles(changedfiles, linknodes, commonrevs, source): yield chunk yield self.close() progress(msgbundling, None) if clnodes: repo.hook('outgoing', node=hex(clnodes[0]), source=source) def generatefiles(self, changedfiles, linknodes, commonrevs, source): repo = self._repo progress = self._progress reorder = self._reorder msgbundling = _('bundling') total = len(changedfiles) # for progress output msgfiles = _('files') for i, fname in enumerate(sorted(changedfiles)): filerevlog = repo.file(fname) if not filerevlog: raise util.Abort(_("empty or missing revlog for %s") % fname) linkrevnodes = linknodes(filerevlog, fname) # Lookup for filenodes, we collected the linkrev nodes above in the # fastpath case and with lookupmf in the slowpath case. def lookupfilelog(x): return linkrevnodes[x] filenodes = self.prune(filerevlog, linkrevnodes, commonrevs, source) if filenodes: progress(msgbundling, i + 1, item=fname, unit=msgfiles, total=total) yield self.fileheader(fname) for chunk in self.group(filenodes, filerevlog, lookupfilelog, reorder=reorder): yield chunk def revchunk(self, revlog, rev, prev, linknode): node = revlog.node(rev) p1, p2 = revlog.parentrevs(rev) base = prev prefix = '' if base == nullrev: delta = revlog.revision(node) prefix = mdiff.trivialdiffheader(len(delta)) else: delta = revlog.revdiff(base, rev) p1n, p2n = revlog.parents(node) basenode = revlog.node(base) meta = self.builddeltaheader(node, p1n, p2n, basenode, linknode) meta += prefix l = len(meta) + len(delta) yield chunkheader(l) yield meta yield delta def builddeltaheader(self, node, p1n, p2n, basenode, linknode): # do nothing with basenode, it is implicitly the previous one in HG10 return struct.pack(self.deltaheader, node, p1n, p2n, linknode) def _changegroupinfo(repo, nodes, source): if repo.ui.verbose or source == 'bundle': repo.ui.status(_("%d changesets found\n") % len(nodes)) if repo.ui.debugflag: repo.ui.debug("list of changesets:\n") for node in nodes: repo.ui.debug("%s\n" % hex(node)) def getsubset(repo, outgoing, bundler, source, fastpath=False): repo = repo.unfiltered() commonrevs = outgoing.common csets = outgoing.missing heads = outgoing.missingheads # We go through the fast path if we get told to, or if all (unfiltered # heads have been requested (since we then know there all linkrevs will # be pulled by the client). heads.sort() fastpathlinkrev = fastpath or ( repo.filtername is None and heads == sorted(repo.heads())) repo.hook('preoutgoing', throw=True, source=source) _changegroupinfo(repo, csets, source) gengroup = bundler.generate(commonrevs, csets, fastpathlinkrev, source) return cg1unpacker(util.chunkbuffer(gengroup), 'UN') def changegroupsubset(repo, roots, heads, source): """Compute a changegroup consisting of all the nodes that are descendants of any of the roots and ancestors of any of the heads. Return a chunkbuffer object whose read() method will return successive changegroup chunks. It is fairly complex as determining which filenodes and which manifest nodes need to be included for the changeset to be complete is non-trivial. Another wrinkle is doing the reverse, figuring out which changeset in the changegroup a particular filenode or manifestnode belongs to. """ cl = repo.changelog if not roots: roots = [nullid] # TODO: remove call to nodesbetween. csets, roots, heads = cl.nodesbetween(roots, heads) discbases = [] for n in roots: discbases.extend([p for p in cl.parents(n) if p != nullid]) outgoing = discovery.outgoing(cl, discbases, heads) bundler = cg1packer(repo) return getsubset(repo, outgoing, bundler, source) def getlocalchangegroup(repo, source, outgoing, bundlecaps=None): """Like getbundle, but taking a discovery.outgoing as an argument. This is only implemented for local repos and reuses potentially precomputed sets in outgoing.""" if not outgoing.missing: return None bundler = cg1packer(repo, bundlecaps) return getsubset(repo, outgoing, bundler, source) def _computeoutgoing(repo, heads, common): """Computes which revs are outgoing given a set of common and a set of heads. This is a separate function so extensions can have access to the logic. Returns a discovery.outgoing object. """ cl = repo.changelog if common: hasnode = cl.hasnode common = [n for n in common if hasnode(n)] else: common = [nullid] if not heads: heads = cl.heads() return discovery.outgoing(cl, common, heads) def getchangegroup(repo, source, heads=None, common=None, bundlecaps=None): """Like changegroupsubset, but returns the set difference between the ancestors of heads and the ancestors common. If heads is None, use the local heads. If common is None, use [nullid]. The nodes in common might not all be known locally due to the way the current discovery protocol works. """ outgoing = _computeoutgoing(repo, heads, common) return getlocalchangegroup(repo, source, outgoing, bundlecaps=bundlecaps) def changegroup(repo, basenodes, source): # to avoid a race we use changegroupsubset() (issue1320) return changegroupsubset(repo, basenodes, repo.heads(), source) def addchangegroupfiles(repo, source, revmap, trp, pr, needfiles): revisions = 0 files = 0 while True: chunkdata = source.filelogheader() if not chunkdata: break f = chunkdata["filename"] repo.ui.debug("adding %s revisions\n" % f) pr() fl = repo.file(f) o = len(fl) if not fl.addgroup(source, revmap, trp): raise util.Abort(_("received file revlog group is empty")) revisions += len(fl) - o files += 1 if f in needfiles: needs = needfiles[f] for new in xrange(o, len(fl)): n = fl.node(new) if n in needs: needs.remove(n) else: raise util.Abort( _("received spurious file revlog entry")) if not needs: del needfiles[f] repo.ui.progress(_('files'), None) for f, needs in needfiles.iteritems(): fl = repo.file(f) for n in needs: try: fl.rev(n) except error.LookupError: raise util.Abort( _('missing file data for %s:%s - run hg verify') % (f, hex(n))) return revisions, files def addchangegroup(repo, source, srctype, url, emptyok=False, targetphase=phases.draft): """Add the changegroup returned by source.read() to this repo. srctype is a string like 'push', 'pull', or 'unbundle'. url is the URL of the repo where this changegroup is coming from. Return an integer summarizing the change to this repo: - nothing changed or no source: 0 - more heads than before: 1+added heads (2..n) - fewer heads than before: -1-removed heads (-2..-n) - number of heads stays the same: 1 """ repo = repo.unfiltered() def csmap(x): repo.ui.debug("add changeset %s\n" % short(x)) return len(cl) def revmap(x): return cl.rev(x) if not source: return 0 repo.hook('prechangegroup', throw=True, source=srctype, url=url) changesets = files = revisions = 0 efiles = set() # write changelog data to temp files so concurrent readers will not see # inconsistent view cl = repo.changelog cl.delayupdate() oldheads = cl.heads() tr = repo.transaction("\n".join([srctype, util.hidepassword(url)])) try: trp = weakref.proxy(tr) # pull off the changeset group repo.ui.status(_("adding changesets\n")) clstart = len(cl) class prog(object): step = _('changesets') count = 1 ui = repo.ui total = None def __call__(repo): repo.ui.progress(repo.step, repo.count, unit=_('chunks'), total=repo.total) repo.count += 1 pr = prog() source.callback = pr source.changelogheader() srccontent = cl.addgroup(source, csmap, trp) if not (srccontent or emptyok): raise util.Abort(_("received changelog group is empty")) clend = len(cl) changesets = clend - clstart for c in xrange(clstart, clend): efiles.update(repo[c].files()) efiles = len(efiles) repo.ui.progress(_('changesets'), None) # pull off the manifest group repo.ui.status(_("adding manifests\n")) pr.step = _('manifests') pr.count = 1 pr.total = changesets # manifests <= changesets # no need to check for empty manifest group here: # if the result of the merge of 1 and 2 is the same in 3 and 4, # no new manifest will be created and the manifest group will # be empty during the pull source.manifestheader() repo.manifest.addgroup(source, revmap, trp) repo.ui.progress(_('manifests'), None) needfiles = {} if repo.ui.configbool('server', 'validate', default=False): # validate incoming csets have their manifests for cset in xrange(clstart, clend): mfest = repo.changelog.read(repo.changelog.node(cset))[0] mfest = repo.manifest.readdelta(mfest) # store file nodes we must see for f, n in mfest.iteritems(): needfiles.setdefault(f, set()).add(n) # process the files repo.ui.status(_("adding file changes\n")) pr.step = _('files') pr.count = 1 pr.total = efiles source.callback = None newrevs, newfiles = addchangegroupfiles(repo, source, revmap, trp, pr, needfiles) revisions += newrevs files += newfiles dh = 0 if oldheads: heads = cl.heads() dh = len(heads) - len(oldheads) for h in heads: if h not in oldheads and repo[h].closesbranch(): dh -= 1 htext = "" if dh: htext = _(" (%+d heads)") % dh repo.ui.status(_("added %d changesets" " with %d changes to %d files%s\n") % (changesets, revisions, files, htext)) repo.invalidatevolatilesets() if changesets > 0: p = lambda: cl.writepending() and repo.root or "" if 'node' not in tr.hookargs: tr.hookargs['node'] = hex(cl.node(clstart)) repo.hook('pretxnchangegroup', throw=True, source=srctype, url=url, pending=p, **tr.hookargs) added = [cl.node(r) for r in xrange(clstart, clend)] publishing = repo.ui.configbool('phases', 'publish', True) if srctype in ('push', 'serve'): # Old servers can not push the boundary themselves. # New servers won't push the boundary if changeset already # exists locally as secret # # We should not use added here but the list of all change in # the bundle if publishing: phases.advanceboundary(repo, tr, phases.public, srccontent) else: # Those changesets have been pushed from the outside, their # phases are going to be pushed alongside. Therefor # `targetphase` is ignored. phases.advanceboundary(repo, tr, phases.draft, srccontent) phases.retractboundary(repo, tr, phases.draft, added) elif srctype != 'strip': # publishing only alter behavior during push # # strip should not touch boundary at all phases.retractboundary(repo, tr, targetphase, added) # make changelog see real files again cl.finalize(trp) tr.close() if changesets > 0: if srctype != 'strip': # During strip, branchcache is invalid but coming call to # `destroyed` will repair it. # In other case we can safely update cache on disk. branchmap.updatecache(repo.filtered('served')) def runhooks(): # These hooks run when the lock releases, not when the # transaction closes. So it's possible for the changelog # to have changed since we last saw it. if clstart >= len(repo): return # forcefully update the on-disk branch cache repo.ui.debug("updating the branch cache\n") repo.hook("changegroup", source=srctype, url=url, **tr.hookargs) for n in added: repo.hook("incoming", node=hex(n), source=srctype, url=url) newheads = [h for h in repo.heads() if h not in oldheads] repo.ui.log("incoming", "%s incoming changes - new heads: %s\n", len(added), ', '.join([hex(c[:6]) for c in newheads])) repo._afterlock(runhooks) finally: tr.release() # never return 0 here: if dh < 0: return dh - 1 else: return dh + 1