view tests/test-conflict.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev` Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the introduction revision during path copies. However, further checking show that finding the introduction revision is still expensive and that we are better off without it. So we simply drop it and only rely on the linkrev optimisation. I ran `perfpathcopies` on 6989 pair of revision in the pypy repository (`hg perfhelper-pathcopies`. The result is massively in favor of dropping this condition. The result of the copy tracing are unchanged. Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it can return wrong result. The following changesets broke test-mv-cp-st-diff.t - if not f.isintroducedafter(limit): + if limit >= 0 and f.linkrev() < limit: return None Here are various numbers (before this changeset/after this changesets) source destination before after saved-time ratio worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675 c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743 22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420 682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074 5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817 worse 1% dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320 worse 5% c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488 worse 10% 3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156 worse 25% 321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259 median 2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947 best 25% 915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673 best 10% ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278 best 5% d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126 best 1% 81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813 best cases c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483 c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508 058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442 9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463 442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487 As one can see, the average case is not really impacted. However, the worth case we get after this changeset are much better than the one we had before it. We have 30 pairs where improvements are above 10 minutes. This reflect in the combined time for all pairs before: 26256s after: 1300s (-95%) If we remove these pathological 30 cases, we still see a significant improvements: before: 1631s after: 1245s (-24%)
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Thu, 10 Oct 2019 03:49:33 +0200
parents fd805a44b89d
children 7315464f0613
line wrap: on
line source

  $ hg init
  $ cat << EOF > a
  > Small Mathematical Series.
  > One
  > Two
  > Three
  > Four
  > Five
  > Hop we are done.
  > EOF
  $ hg add a
  $ hg commit -m ancestor
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 5
  > Hop we are done.
  > EOF
  $ hg commit -m branch1
  $ hg co 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 6
  > 8
  > Hop we are done.
  > EOF
  $ hg commit -m branch2
  created new head

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ hg id
  618808747361+c0c68e4fe667+ tip

  $ echo "[commands]" >> $HGRCPATH
  $ echo "status.verbose=true" >> $HGRCPATH
  $ hg status
  M a
  ? a.orig
  # The repository is in an unfinished *merge* state.
  
  # Unresolved merge conflicts:
  # 
  #     a
  # 
  # To mark files as resolved:  hg resolve --mark FILE
  
  # To continue:    hg commit
  # To abort:       hg merge --abort
  
  $ hg status -Tjson
  [
   {
    "path": "a",
    "status": "M"
   },
   {
    "path": "a.orig",
    "status": "?"
   }
  ]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 618808747361 - test: branch2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    c0c68e4fe667 - test: branch1
  Hop we are done.

  $ hg status --config commands.status.verbose=0
  M a
  ? a.orig

Verify custom conflict markers

  $ hg up -q --clean .
  $ cat <<EOF >> .hg/hgrc
  > [ui]
  > mergemarkertemplate = '{author} {rev}'
  > EOF

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line splitting of custom conflict marker which causes multiple lines

  $ hg up -q --clean .
  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
  > EOF

  $ hg -q merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: test 2
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    test 1
  Hop we are done.

Verify line trimming of custom conflict marker using multi-byte characters

  $ hg up -q --clean .
  $ "$PYTHON" <<EOF
  > fp = open('logfile', 'wb')
  > fp.write(b'12345678901234567890123456789012345678901234567890' +
  >          b'1234567890') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ hg add logfile
  $ hg --encoding utf-8 commit --logfile logfile

  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={desc|firstline}
  > EOF

  $ hg -q --encoding utf-8 merge 1
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy: 1234567890123456789012345678901234567890123456789012345...
  6
  8
  =======
  4
  5
  >>>>>>> merge rev:    branch1
  Hop we are done.

Verify basic conflict markers

  $ hg up -q --clean 2
  $ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  1
  2
  3
  <<<<<<< working copy
  6
  8
  =======
  4
  5
  >>>>>>> merge rev
  Hop we are done.

internal:merge3

  $ hg up -q --clean .

  $ hg merge 1 --tool internal:merge3
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ cat a
  Small Mathematical Series.
  <<<<<<< working copy
  1
  2
  3
  6
  8
  ||||||| base
  One
  Two
  Three
  Four
  Five
  =======
  1
  2
  3
  4
  5
  >>>>>>> merge rev
  Hop we are done.

Add some unconflicting changes on each head, to make sure we really
are merging, unlike :local and :other

  $ hg up -C
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "e0693e20f496: 123456789012345678901234567890123456789012345678901234567890????"
  1 other heads for branch "default"
  $ printf "\n\nEnd of file\n" >> a
  $ hg ci -m "Add some stuff at the end"
  $ hg up -r 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ printf "Start of file\n\n\n" > tmp
  $ cat a >> tmp
  $ mv tmp a
  $ hg ci -m "Add some stuff at the beginning"

Now test :merge-other and :merge-local

  $ hg merge
  merging a
  warning: conflicts while merging a! (edit, then use 'hg resolve --mark')
  1 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
  $ hg resolve --tool :merge-other a
  merging a
  (no more unresolved files)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  6
  8
  Hop we are done.
  
  
  End of file

  $ hg up -C
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  updated to "18b51d585961: Add some stuff at the beginning"
  1 other heads for branch "default"
  $ hg merge --tool :merge-local
  merging a
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ cat a
  Start of file
  
  
  Small Mathematical Series.
  1
  2
  3
  4
  5
  Hop we are done.
  
  
  End of file