view tests/test-encoding-align.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev` Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the introduction revision during path copies. However, further checking show that finding the introduction revision is still expensive and that we are better off without it. So we simply drop it and only rely on the linkrev optimisation. I ran `perfpathcopies` on 6989 pair of revision in the pypy repository (`hg perfhelper-pathcopies`. The result is massively in favor of dropping this condition. The result of the copy tracing are unchanged. Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it can return wrong result. The following changesets broke test-mv-cp-st-diff.t - if not f.isintroducedafter(limit): + if limit >= 0 and f.linkrev() < limit: return None Here are various numbers (before this changeset/after this changesets) source destination before after saved-time ratio worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675 c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743 22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420 682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074 5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817 worse 1% dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320 worse 5% c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488 worse 10% 3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156 worse 25% 321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259 median 2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947 best 25% 915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673 best 10% ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278 best 5% d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126 best 1% 81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813 best cases c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483 c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508 058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442 9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463 442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487 As one can see, the average case is not really impacted. However, the worth case we get after this changeset are much better than the one we had before it. We have 30 pairs where improvements are above 10 minutes. This reflect in the combined time for all pairs before: 26256s after: 1300s (-95%) If we remove these pathological 30 cases, we still see a significant improvements: before: 1631s after: 1245s (-24%)
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Thu, 10 Oct 2019 03:49:33 +0200
parents 24bef6a99958
children
line wrap: on
line source

Test alignment of multibyte characters

  $ HGENCODING=utf-8
  $ export HGENCODING
  $ hg init t
  $ cd t
  $ "$PYTHON" << EOF
  > from mercurial import pycompat
  > # (byte, width) = (6, 4)
  > s = b"\xe7\x9f\xad\xe5\x90\x8d"
  > # (byte, width) = (7, 7): odd width is good for alignment test
  > m = b"MIDDLE_"
  > # (byte, width) = (18, 12)
  > l = b"\xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d"
  > f = open('s', 'wb'); f.write(s); f.close()
  > f = open('m', 'wb'); f.write(m); f.close()
  > f = open('l', 'wb'); f.write(l); f.close()
  > # instant extension to show list of options
  > f = open('showoptlist.py', 'wb'); f.write(b"""# encoding: utf-8
  > from mercurial import registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > 
  > @command(b'showoptlist',
  >     [(b's', b'opt1', b'', b'short width'  + (b' ' +%(s)s) * 8, %(s)s),
  >     (b'm', b'opt2', b'', b'middle width' + (b' ' + %(m)s) * 8, %(m)s),
  >     (b'l', b'opt3', b'', b'long width'   + (b' ' + %(l)s) * 8, %(l)s)],
  >     b'')
  > def showoptlist(ui, repo, *pats, **opts):
  >     '''dummy command to show option descriptions'''
  >     return 0
  > """ % {b's': pycompat.byterepr(s),
  >        b'm': pycompat.byterepr(m),
  >        b'l': pycompat.byterepr(l),
  >       })
  > f.close()
  > EOF
  $ S=`cat s`
  $ M=`cat m`
  $ L=`cat l`

alignment of option descriptions in help

  $ cat <<EOF > .hg/hgrc
  > [extensions]
  > ja_ext = `pwd`/showoptlist.py
  > EOF

check alignment of option descriptions in help

  $ hg help showoptlist
  hg showoptlist
  
  dummy command to show option descriptions
  
  options:
  
   -s --opt1 \xe7\x9f\xad\xe5\x90\x8d         short width \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d \xe7\x9f\xad\xe5\x90\x8d (esc)
   -m --opt2 MIDDLE_      middle width MIDDLE_ MIDDLE_ MIDDLE_ MIDDLE_ MIDDLE_
                          MIDDLE_ MIDDLE_ MIDDLE_
   -l --opt3 \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d long width \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
                          \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
                          \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
  
  (some details hidden, use --verbose to show complete help)


  $ rm -f s; touch s
  $ rm -f m; touch m
  $ rm -f l; touch l

add files

  $ cp s $S
  $ hg add $S
  $ cp m $M
  $ hg add $M
  $ cp l $L
  $ hg add $L

commit(1)

  $ echo 'first line(1)' >> s; cp s $S
  $ echo 'first line(2)' >> m; cp m $M
  $ echo 'first line(3)' >> l; cp l $L
  $ hg commit -m 'first commit' -u $S

commit(2)

  $ echo 'second line(1)' >> s; cp s $S
  $ echo 'second line(2)' >> m; cp m $M
  $ echo 'second line(3)' >> l; cp l $L
  $ hg commit -m 'second commit' -u $M

commit(3)

  $ echo 'third line(1)' >> s; cp s $S
  $ echo 'third line(2)' >> m; cp m $M
  $ echo 'third line(3)' >> l; cp l $L
  $ hg commit -m 'third commit' -u $L

check alignment of user names in annotate

  $ hg annotate -u $M
          \xe7\x9f\xad\xe5\x90\x8d: first line(2) (esc)
       MIDDLE_: second line(2)
  \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d: third line(2) (esc)

check alignment of filenames in diffstat

  $ hg diff -c tip --stat
   MIDDLE_      |  1 +
   \xe7\x9f\xad\xe5\x90\x8d         |  1 + (esc)
   \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d |  1 + (esc)
   3 files changed, 3 insertions(+), 0 deletions(-)

add branches/tags

  $ hg branch $S
  marked working directory as branch \xe7\x9f\xad\xe5\x90\x8d (esc)
  (branches are permanent and global, did you want a bookmark?)
  $ hg tag $S
  $ hg book -f $S
  $ hg branch $M
  marked working directory as branch MIDDLE_
  $ hg tag $M
  $ hg book -f $M
  $ hg branch $L
  marked working directory as branch \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d (esc)
  $ hg tag $L
  $ hg book -f $L

check alignment of branches

  $ hg branches
  \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d                   5:d745ff46155b (esc)
  MIDDLE_                        4:9259be597f19 (inactive)
  \xe7\x9f\xad\xe5\x90\x8d                           3:b06c5b6def9e (inactive) (esc)
  default                        2:64a70663cee8 (inactive)

check alignment of tags

  $ hg tags
  tip                                5:d745ff46155b
  \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d                       4:9259be597f19 (esc)
  MIDDLE_                            3:b06c5b6def9e
  \xe7\x9f\xad\xe5\x90\x8d                               2:64a70663cee8 (esc)

check alignment of bookmarks

  $ hg book
     MIDDLE_                   5:d745ff46155b
     \xe7\x9f\xad\xe5\x90\x8d                      4:9259be597f19 (esc)
   * \xe9\x95\xb7\xe3\x81\x84\xe9\x95\xb7\xe3\x81\x84\xe5\x90\x8d\xe5\x89\x8d              5:d745ff46155b (esc)