pathcopies: give up any optimization based on `introrev`
Between
8a0136f69027 and
d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.
I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.
Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t
- if not f.isintroducedafter(limit):
+ if limit >= 0 and f.linkrev() < limit:
return None
Here are various numbers (before this changeset/after this changesets)
source destination before after saved-time ratio
worth cases
e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse 1%
dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse 5%
c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%
3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%
321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median
2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%
915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%
ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best 5%
d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best 1%
81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases
c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487
As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.
This reflect in the combined time for all pairs
before: 26256s
after: 1300s (-95%)
If we remove these pathological 30 cases, we still see a significant improvements:
before: 1631s
after: 1245s (-24%)
# Create server
$ hg init server
$ cd server
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
$ cd ../
# Clone server and enable extensions
$ hg clone -q server client
$ cd client
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
# Commit file that will trigger the noop extension
$ echo '[NOOP]' > noop
$ hg commit -Aqm "noop"
# Commit file that will trigger the base64 extension
$ echo '[BASE64]' > base64
$ hg commit -Aqm 'base64'
# Commit file that will trigger the gzip extension
$ echo '[GZIP]' > gzip
$ hg commit -Aqm 'gzip'
# Commit file that will trigger noop and base64
$ echo '[NOOP][BASE64]' > noop-base64
$ hg commit -Aqm 'noop+base64'
# Commit file that will trigger noop and gzip
$ echo '[NOOP][GZIP]' > noop-gzip
$ hg commit -Aqm 'noop+gzip'
# Commit file that will trigger base64 and gzip
$ echo '[BASE64][GZIP]' > base64-gzip
$ hg commit -Aqm 'base64+gzip'
# Commit file that will trigger base64, gzip and noop
$ echo '[BASE64][GZIP][NOOP]' > base64-gzip-noop
$ hg commit -Aqm 'base64+gzip+noop'
# TEST: ensure the revision data is consistent
$ hg cat noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r . base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r . gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r . noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r . noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r . base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r . base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# Push to the server
$ hg push
pushing to $TESTTMP/server
searching for changes
adding changesets
adding manifests
adding file changes
added 7 changesets with 7 changes to 7 files
Ensure the data got to the server OK
$ cd ../server
$ hg cat -r 6e48f4215d24 noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r 6e48f4215d24 base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r 6e48f4215d24 gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r 6e48f4215d24 noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r 6e48f4215d24 noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r 6e48f4215d24 base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r 6e48f4215d24 base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# Initialize new client (not cloning) and setup extension
$ cd ..
$ hg init client2
$ cd client2
$ cat >> .hg/hgrc << EOF
> [paths]
> default = $TESTTMP/server
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> EOF
# Pull from server and update to latest revision
$ hg pull default
pulling from $TESTTMP/server
requesting all changes
adding changesets
adding manifests
adding file changes
added 7 changesets with 7 changes to 7 files
new changesets 07b1b9442c5b:6e48f4215d24
(run 'hg update' to get a working copy)
$ hg update
7 files updated, 0 files merged, 0 files removed, 0 files unresolved
# TEST: ensure the revision data is consistent
$ hg cat noop
[NOOP]
$ hg debugdata noop 0
[NOOP]
$ hg cat -r . base64
[BASE64]
$ hg debugdata base64 0
W0JBU0U2NF0K (no-eol)
$ hg cat -r . gzip
[GZIP]
$ hg debugdata gzip 0
x\x9c\x8bv\x8f\xf2\x0c\x88\xe5\x02\x00\x08\xc8\x01\xfd (no-eol) (esc)
$ hg cat -r . noop-base64
[NOOP][BASE64]
$ hg debugdata noop-base64 0
W05PT1BdW0JBU0U2NF0K (no-eol)
$ hg cat -r . noop-gzip
[NOOP][GZIP]
$ hg debugdata noop-gzip 0
x\x9c\x8b\xf6\xf3\xf7\x0f\x88\x8dv\x8f\xf2\x0c\x88\xe5\x02\x00\x1dH\x03\xf1 (no-eol) (esc)
$ hg cat -r . base64-gzip
[BASE64][GZIP]
$ hg debugdata base64-gzip 0
eJyLdnIMdjUziY12j/IMiOUCACLBBDo= (no-eol)
$ hg cat -r . base64-gzip-noop
[BASE64][GZIP][NOOP]
$ hg debugdata base64-gzip-noop 0
eJyLdnIMdjUziY12j/IMiI328/cPiOUCAESjBi4= (no-eol)
# TEST: ensure a missing processor is handled
$ echo '[FAIL][BASE64][GZIP][NOOP]' > fail-base64-gzip-noop
$ hg commit -Aqm 'fail+base64+gzip+noop'
abort: missing processor for flag '0x1'!
[255]
$ rm fail-base64-gzip-noop
# TEST: ensure we cannot register several flag processors on the same flag
$ cat >> .hg/hgrc << EOF
> [extensions]
> extension=$TESTDIR/flagprocessorext.py
> duplicate=$TESTDIR/flagprocessorext.py
> EOF
$ hg debugrebuilddirstate
Traceback (most recent call last):
File "*/mercurial/extensions.py", line *, in _runextsetup (glob)
extsetup(ui)
File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
REVIDX_NOOP, (noopdonothingread, noopdonothing, validatehash,)
File "*/mercurial/revlogutils/flagutil.py", line *, in addflagprocessor (glob)
insertflagprocessor(flag, processor, flagprocessors)
File "*/mercurial/revlogutils/flagutil.py", line *, in insertflagprocessor (glob)
raise error.Abort(msg)
mercurial.error.Abort: b"cannot register multiple processors on flag '0x8'." (py3 !)
Abort: cannot register multiple processors on flag '0x8'. (no-py3 !)
*** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
$ hg st 2>&1 | egrep 'cannot register multiple processors|flagprocessorext'
File "*/tests/flagprocessorext.py", line *, in extsetup (glob)
mercurial.error.Abort: b"cannot register multiple processors on flag '0x8'." (py3 !)
Abort: cannot register multiple processors on flag '0x8'. (no-py3 !)
*** failed to set up extension duplicate: cannot register multiple processors on flag '0x8'.
File "*/tests/flagprocessorext.py", line *, in b64decode (glob)
$ cd ..
# TEST: bundle repo
$ hg init bundletest
$ cd bundletest
$ cat >> .hg/hgrc << EOF
> [extensions]
> flagprocessor=$TESTDIR/flagprocessorext.py
> EOF
$ for i in 0 single two three 4; do
> echo '[BASE64]a-bit-longer-'$i > base64
> hg commit -m base64-$i -A base64
> done
$ hg update 2 -q
$ echo '[BASE64]a-bit-longer-branching' > base64
$ hg commit -q -m branching
#if repobundlerepo
$ hg bundle --base 1 bundle.hg
4 changesets found
$ hg --config extensions.strip= strip -r 2 --no-backup --force -q
$ hg -R bundle.hg log --stat -T '{rev} {desc}\n' base64
5 branching
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
4 base64-4
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
3 base64-three
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
2 base64-two
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
1 base64-single
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
0 base64-0
base64 | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg bundle -R bundle.hg --base 1 bundle-again.hg -q
$ hg -R bundle-again.hg log --stat -T '{rev} {desc}\n' base64
5 branching
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
4 base64-4
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
3 base64-three
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
2 base64-two
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
1 base64-single
base64 | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
0 base64-0
base64 | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ rm bundle.hg bundle-again.hg
#endif
# TEST: hg status
$ hg status
$ hg diff