Mercurial > hg
view tests/test-http-bundle1.t @ 43198:c16fe77e340a
pathcopies: give up any optimization based on `introrev`
Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.
I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.
Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t
- if not f.isintroducedafter(limit):
+ if limit >= 0 and f.linkrev() < limit:
return None
Here are various numbers (before this changeset/after this changesets)
source destination before after saved-time ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse 1% dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse 5% c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10% 3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25% 321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median 2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25% 915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10% ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best 5% d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best 1% 81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487
As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.
This reflect in the combined time for all pairs
before: 26256s
after: 1300s (-95%)
If we remove these pathological 30 cases, we still see a significant improvements:
before: 1631s
after: 1245s (-24%)
| author | Pierre-Yves David <pierre-yves.david@octobus.net> |
|---|---|
| date | Thu, 10 Oct 2019 03:49:33 +0200 |
| parents | 94faa2e84094 |
| children | ebee234d952a |
line wrap: on
line source
#require serve This test is a duplicate of 'test-http.t', feel free to factor out parts that are not bundle1/bundle2 specific. $ cat << EOF >> $HGRCPATH > [devel] > # This test is dedicated to interaction through old bundle > legacy.exchange = bundle1 > EOF $ hg init test $ cd test $ echo foo>foo $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg $ echo foo>foo.d/foo $ echo bar>foo.d/bAr.hg.d/BaR $ echo bar>foo.d/baR.d.hg/bAR $ hg commit -A -m 1 adding foo adding foo.d/bAr.hg.d/BaR adding foo.d/baR.d.hg/bAR adding foo.d/foo $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log $ hg serve --config server.uncompressed=False -p $HGPORT1 -d --pid-file=../hg2.pid Test server address cannot be reused $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at 'localhost:$HGPORT1': $EADDRINUSE$ [255] $ cd .. $ cat hg1.pid hg2.pid >> $DAEMON_PIDS clone via stream #if no-reposimplestore $ hg clone --stream http://localhost:$HGPORT/ copy 2>&1 streaming all changes 6 files to transfer, 606 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 1 changesets with 4 changes to 4 files #endif try to clone via stream, should use pull instead $ hg clone --stream http://localhost:$HGPORT1/ copy2 warning: stream clone requested but server has them disabled requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved try to clone via stream but missing requirements, so should use pull instead $ cat > $TESTTMP/removesupportedformat.py << EOF > from mercurial import localrepo > def extsetup(ui): > localrepo.localrepository.supportedformats.remove(b'generaldelta') > EOF $ hg clone --config extensions.rsf=$TESTTMP/removesupportedformat.py --stream http://localhost:$HGPORT/ copy3 warning: stream clone requested but client is missing requirements: generaldelta (see https://www.mercurial-scm.org/wiki/MissingRequirement for more information) requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved clone via pull $ hg clone http://localhost:$HGPORT1/ copy-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy-pull checking changesets checking manifests crosschecking files in changesets and manifests checking files checked 1 changesets with 4 changes to 4 files $ cd test $ echo bar > bar $ hg commit -A -d '1 0' -m 2 adding bar $ cd .. clone over http with --update $ hg clone http://localhost:$HGPORT1/ updated --update 0 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files new changesets 8b6053c928fe:5fed3813f7f5 updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -r . -R updated changeset: 0:8b6053c928fe user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 $ rm -rf updated incoming via HTTP $ hg clone http://localhost:$HGPORT1/ --rev 0 partial adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ touch LOCAL $ hg ci -qAm LOCAL $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n' comparing with http://localhost:$HGPORT1/ searching for changes 2 $ cd .. pull $ cd copy-pull $ cat >> .hg/hgrc <<EOF > [hooks] > changegroup = sh -c "printenv.py --line changegroup" > EOF $ hg pull pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files new changesets 5fed3813f7f5 changegroup hook: HG_HOOKNAME=changegroup HG_HOOKTYPE=changegroup HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_NODE_LAST=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:$ID$ HG_TXNNAME=pull http://localhost:$HGPORT1/ HG_URL=http://localhost:$HGPORT1/ (run 'hg update' to get a working copy) $ cd .. clone from invalid URL $ hg clone http://localhost:$HGPORT/bad abort: HTTP Error 404: Not Found [255] test http authentication + use the same server to test server side streaming preference $ cd test $ hg serve --config extensions.x=$TESTDIR/httpserverauth.py -p $HGPORT2 -d \ > --pid-file=pid --config server.preferuncompressed=True \ > --config web.push_ssl=False --config web.allow_push=* -A ../access.log $ cat pid >> $DAEMON_PIDS $ cat << EOF > get_pass.py > import getpass > def newgetpass(arg): > return "pass" > getpass.getpass = newgetpass > EOF $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/ http authorization required for http://localhost:$HGPORT2/ realm: mercurial user: user password: 5fed3813f7f5 $ hg id http://user:pass@localhost:$HGPORT2/ 5fed3813f7f5 $ echo '[auth]' >> .hg/hgrc $ echo 'l.schemes=http' >> .hg/hgrc $ echo 'l.prefix=lo' >> .hg/hgrc $ echo 'l.username=user' >> .hg/hgrc $ echo 'l.password=pass' >> .hg/hgrc $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://user@localhost:$HGPORT2/ 5fed3813f7f5 #if no-reposimplestore $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1 streaming all changes 7 files to transfer, 916 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved #endif --pull should override server's preferuncompressed $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files new changesets 8b6053c928fe:5fed3813f7f5 updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg id http://user2@localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://user:pass2@localhost:$HGPORT2/ abort: HTTP Error 403: no [255] $ hg -R dest-pull tag -r tip top $ hg -R dest-pull push http://user:pass@localhost:$HGPORT2/ pushing to http://user:***@localhost:$HGPORT2/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg rollback -q $ sed 's/.*] "/"/' < ../access.log "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - (no-reposimplestore !) "GET /?cmd=capabilities HTTP/1.1" 200 - (no-reposimplestore !) "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=stream_out HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=capabilities HTTP/1.1" 401 - (no-reposimplestore !) "GET /?cmd=capabilities HTTP/1.1" 200 - (no-reposimplestore !) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull (no-reposimplestore !) "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 403 - "GET /?cmd=capabilities HTTP/1.1" 401 - "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=branchmap HTTP/1.1" 200 - x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=686173686564+5eb5abfefeea63c80dd7553bcc3783f37e0c5524* (glob) "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases x-hgproto-1:0.1 0.2 comp=$USUAL_COMPRESSIONS$ partial-pull $ cd .. clone of serve with repo in root and unserved subrepo (issue2970) $ hg --cwd test init sub $ echo empty > test/sub/empty $ hg --cwd test/sub add empty $ hg --cwd test/sub commit -qm 'add empty' $ hg --cwd test/sub tag -r 0 something $ echo sub = sub > test/.hgsub $ hg --cwd test add .hgsub $ hg --cwd test commit -qm 'add subrepo' $ hg clone http://localhost:$HGPORT noslash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files new changesets 8b6053c928fe:56f9bc90cce6 updating to branch default cloning subrepo sub from http://localhost:$HGPORT/sub abort: HTTP Error 404: Not Found [255] $ hg clone http://localhost:$HGPORT/ slash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files new changesets 8b6053c928fe:56f9bc90cce6 updating to branch default cloning subrepo sub from http://localhost:$HGPORT/sub abort: HTTP Error 404: Not Found [255] check error log $ cat error.log Check error reporting while pulling/cloning $ $RUNTESTDIR/killdaemons.py $ hg serve -R test -p $HGPORT -d --pid-file=hg3.pid -E error.log --config extensions.crash=${TESTDIR}/crashgetbundler.py $ cat hg3.pid >> $DAEMON_PIDS $ hg clone http://localhost:$HGPORT/ abort-clone requesting all changes abort: remote error: this is an exercise [255] $ cat error.log disable pull-based clones $ hg serve -R test -p $HGPORT1 -d --pid-file=hg4.pid -E error.log --config server.disablefullbundle=True $ cat hg4.pid >> $DAEMON_PIDS $ hg clone http://localhost:$HGPORT1/ disable-pull-clone requesting all changes abort: remote error: server has pull-based clones disabled [255] #if no-reposimplestore ... but keep stream clones working $ hg clone --stream --noupdate http://localhost:$HGPORT1/ test-stream-clone streaming all changes * files to transfer, * of data (glob) transferred * in * seconds (* KB/sec) (glob) searching for changes no changes found #endif ... and also keep partial clones and pulls working $ hg clone http://localhost:$HGPORT1 --rev 0 test-partial-clone adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files new changesets 8b6053c928fe updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg pull -R test-partial-clone pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 2 changesets with 3 changes to 3 files new changesets 5fed3813f7f5:56f9bc90cce6 (run 'hg update' to get a working copy) $ cat error.log