Mercurial > hg
view tests/test-init.t @ 43198:c16fe77e340a
pathcopies: give up any optimization based on `introrev`
Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.
I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.
Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t
- if not f.isintroducedafter(limit):
+ if limit >= 0 and f.linkrev() < limit:
return None
Here are various numbers (before this changeset/after this changesets)
source destination before after saved-time ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse 1% dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse 5% c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10% 3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25% 321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median 2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25% 915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10% ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best 5% d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best 1% 81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487
As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.
This reflect in the combined time for all pairs
before: 26256s
after: 1300s (-95%)
If we remove these pathological 30 cases, we still see a significant improvements:
before: 1631s
after: 1245s (-24%)
| author | Pierre-Yves David <pierre-yves.david@octobus.net> |
|---|---|
| date | Thu, 10 Oct 2019 03:49:33 +0200 |
| parents | 189e06b2d719 |
| children | 95c4cca641f6 |
line wrap: on
line source
This test tries to exercise the ssh functionality with a dummy script $ checknewrepo() > { > name=$1 > if [ -d "$name"/.hg/store ]; then > echo store created > fi > if [ -f "$name"/.hg/00changelog.i ]; then > echo 00changelog.i created > fi > cat "$name"/.hg/requires > } creating 'local' $ hg init local $ checknewrepo local store created 00changelog.i created dotencode fncache generaldelta revlogv1 sparserevlog store testonly-simplestore (reposimplestore !) $ echo this > local/foo $ hg ci --cwd local -A -m "init" adding foo test custom revlog chunk cache sizes $ hg --config format.chunkcachesize=0 log -R local -pv abort: revlog chunk cache size 0 is not greater than 0! [255] $ hg --config format.chunkcachesize=1023 log -R local -pv abort: revlog chunk cache size 1023 is not a power of 2! [255] $ hg --config format.chunkcachesize=1024 log -R local -pv changeset: 0:08b9e9f63b32 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 files: foo description: init diff -r 000000000000 -r 08b9e9f63b32 foo --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/foo Thu Jan 01 00:00:00 1970 +0000 @@ -0,0 +1,1 @@ +this creating repo with format.usestore=false $ hg --config format.usestore=false init old $ checknewrepo old generaldelta revlogv1 testonly-simplestore (reposimplestore !) sparserevlog creating repo with format.usefncache=false $ hg --config format.usefncache=false init old2 $ checknewrepo old2 store created 00changelog.i created generaldelta revlogv1 sparserevlog store testonly-simplestore (reposimplestore !) creating repo with format.dotencode=false $ hg --config format.dotencode=false init old3 $ checknewrepo old3 store created 00changelog.i created fncache generaldelta revlogv1 sparserevlog store testonly-simplestore (reposimplestore !) creating repo with format.dotencode=false $ hg --config format.generaldelta=false --config format.usegeneraldelta=false --config format.sparse-revlog=no init old4 $ checknewrepo old4 store created 00changelog.i created dotencode fncache revlogv1 store testonly-simplestore (reposimplestore !) test failure $ hg init local abort: repository local already exists! [255] init+push to remote2 $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2 $ hg incoming -R remote2 local comparing with local changeset: 0:08b9e9f63b32 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: init $ hg push -R local -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote2 pushing to ssh://user@dummy/remote2 searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files clone to remote1 $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1 searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files The largefiles extension doesn't crash $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remotelf --config extensions.largefiles= The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !) The fsmonitor extension is incompatible with the largefiles extension and has been disabled. (fsmonitor !) searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files init to existing repo $ hg init -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote1 abort: repository remote1 already exists! abort: could not create remote repo! [255] clone to existing repo $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote1 abort: repository remote1 already exists! abort: could not create remote repo! [255] output of dummyssh $ cat dummylog Got arguments 1:user@dummy 2:hg init remote2 Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio Got arguments 1:user@dummy 2:hg -R remote2 serve --stdio Got arguments 1:user@dummy 2:hg init remote1 Got arguments 1:user@dummy 2:hg -R remote1 serve --stdio Got arguments 1:user@dummy 2:hg init remotelf Got arguments 1:user@dummy 2:hg -R remotelf serve --stdio Got arguments 1:user@dummy 2:hg init remote1 Got arguments 1:user@dummy 2:hg init remote1 comparing repositories $ hg tip -q -R local 0:08b9e9f63b32 $ hg tip -q -R remote1 0:08b9e9f63b32 $ hg tip -q -R remote2 0:08b9e9f63b32 check names for repositories (clashes with URL schemes, special chars) $ for i in bundle file hg http https old-http ssh static-http "with space"; do > printf "hg init \"$i\"... " > hg init "$i" > test -d "$i" -a -d "$i/.hg" && echo "ok" || echo "failed" > done hg init "bundle"... ok hg init "file"... ok hg init "hg"... ok hg init "http"... ok hg init "https"... ok hg init "old-http"... ok hg init "ssh"... ok hg init "static-http"... ok hg init "with space"... ok #if eol-in-paths /* " " is not a valid name for a directory on Windows */ $ hg init " " $ test -d " " $ test -d " /.hg" #endif creating 'local/sub/repo' $ hg init local/sub/repo $ checknewrepo local/sub/repo store created 00changelog.i created dotencode fncache generaldelta revlogv1 sparserevlog store testonly-simplestore (reposimplestore !) prepare test of init of url configured from paths $ echo '[paths]' >> $HGRCPATH $ echo "somewhere = `pwd`/url from paths" >> $HGRCPATH $ echo "elsewhere = `pwd`/another paths url" >> $HGRCPATH init should (for consistency with clone) expand the url $ hg init somewhere $ checknewrepo "url from paths" store created 00changelog.i created dotencode fncache generaldelta revlogv1 sparserevlog store testonly-simplestore (reposimplestore !) verify that clone also expand urls $ hg clone somewhere elsewhere updating to branch default 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ checknewrepo "another paths url" store created 00changelog.i created dotencode fncache generaldelta revlogv1 sparserevlog store testonly-simplestore (reposimplestore !) clone bookmarks $ hg -R local bookmark test $ hg -R local bookmarks * test 0:08b9e9f63b32 $ hg clone -e "\"$PYTHON\" \"$TESTDIR/dummyssh\"" local ssh://user@dummy/remote-bookmarks searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files exporting bookmark test $ hg -R remote-bookmarks bookmarks test 0:08b9e9f63b32 Check format constraint ----------------------- $ hg init issue6056 --config format.usegeneraldelta=0 --config format.sparse-revlog=0 $ cd issue6056 $ echo foo > 1 $ echo foo > 2 $ echo foo > 3 $ echo foo > 4 $ echo foo > 5 $ hg add * Build a bogus repository (sparserevlog without general delta) $ hg commit -m 'initial changesets' $ echo 'sparserevlog' >> .hg/requires $ for x in `$TESTDIR/seq.py 100`; do > echo $x >> `expr $x % 5 + 1` > hg commit -m $x > done $ cd ..