view tests/test-pager.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev`

Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.

I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.

Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t

    -        if not f.isintroducedafter(limit):
    +        if limit >= 0 and f.linkrev() < limit:
                 return None


Here are various numbers (before this changeset/after this changesets)

            source       destination  before      after    saved-time  ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
            c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
            22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
            682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
            5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse  1%   dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse  5%   c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%   3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%   321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median      2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%    915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%    ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best  5%    d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best  1%    81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases  c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
            c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
            058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
            9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
            442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487


As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.

This reflect in the combined time for all pairs
before: 26256s
after:   1300s (-95%)

If we remove these pathological 30 cases, we still see a significant improvements:
before:  1631s
after:   1245s (-24%)

  $ cat >> fakepager.py <<EOF
  > import sys
  > printed = False
  > for line in sys.stdin:
  >     sys.stdout.write('paged! %r\n' % line)
  >     printed = True
  > if not printed:
  >     sys.stdout.write('paged empty output!\n')
  > EOF

Enable ui.formatted because pager won't fire without it, and set up
pager and tell it to use our fake pager that lets us see when the
pager was running.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > formatted = yes
  > color = no
  > [pager]
  > pager = "$PYTHON" $TESTTMP/fakepager.py
  > EOF

  $ hg init repo
  $ cd repo
  $ echo a >> a
  $ hg add a
  $ hg ci -m 'add a'
  $ for x in `"$PYTHON" $TESTDIR/seq.py 1 10`; do
  >   echo a $x >> a
  >   hg ci -m "modify a $x"
  > done

By default diff and log are paged, but id is not:

  $ hg diff -c 2 --pager=yes
  paged! 'diff -r f4be7687d414 -r bce265549556 a\n'
  paged! '--- a/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '+++ b/a\tThu Jan 01 00:00:00 1970 +0000\n'
  paged! '@@ -1,2 +1,3 @@\n'
  paged! ' a\n'
  paged! ' a 1\n'
  paged! '+a 2\n'

  $ hg log --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

  $ hg id
  46106edeeb38 tip

We can control the pager from the config

  $ hg log --limit 1 --config 'ui.paginate=False'
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  $ hg log --limit 1 --config 'ui.paginate=0'
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  $ hg log --limit 1 --config 'ui.paginate=1'
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

explicit --pager=on should take precedence over other configurations
(issue5580)

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > paginate = false
  > EOF
  $ hg log --limit 1 --pager=on
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > # true is default value of ui.paginate
  > paginate = true
  > EOF
  $ hg log --limit 1 --pager=off
  changeset:   10:46106edeeb38
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  

We can enable the pager on id:

BROKEN: should be paged
  $ hg --config pager.attend-id=yes id
  46106edeeb38 tip

Setting attend-$COMMAND to a false value works, even with pager in
core:
  $ hg --config pager.attend-diff=no diff -c 2
  diff -r f4be7687d414 -r bce265549556 a
  --- a/a	Thu Jan 01 00:00:00 1970 +0000
  +++ b/a	Thu Jan 01 00:00:00 1970 +0000
  @@ -1,2 +1,3 @@
   a
   a 1
  +a 2

Command aliases should have same behavior as main command

  $ hg history --limit 2
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! 'changeset:   9:6dd8ea7dd621\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'

Abbreviated command alias should also be paged

  $ hg hist -l 1
  paged! 'changeset:   10:46106edeeb38\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'

Attend for an abbreviated command does not work

  $ hg --config pager.attend-ident=true ident
  46106edeeb38 tip

  $ hg --config extensions.pager= --config pager.attend-ident=true ident
  46106edeeb38 tip

Pager should not start if stdout is not a tty.

  $ hg log -l1 -q --config ui.formatted=False
  10:46106edeeb38

Pager should be disabled if pager.pager is empty (otherwise the output would
be silently lost.)

  $ hg log -l1 -q --config pager.pager=
  10:46106edeeb38

Pager with color enabled allows colors to come through by default,
even though stdout is no longer a tty.
  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > color = always
  > [color]
  > mode = ansi
  > EOF
  $ hg log --limit 3
  paged! '\x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m\n'
  paged! 'tag:         tip\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 10\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 9\n'
  paged! '\n'
  paged! '\x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m\n'
  paged! 'user:        test\n'
  paged! 'date:        Thu Jan 01 00:00:00 1970 +0000\n'
  paged! 'summary:     modify a 8\n'
  paged! '\n'

#if no-chg
An invalid pager command name is reported sensibly if we don't have to
use shell=True in the subprocess call:
  $ hg log --limit 3 --config pager.pager=this-command-better-never-exist
  missing pager command 'this-command-better-never-exist', skipping pager
  \x1b[0;33mchangeset:   10:46106edeeb38\x1b[0m (esc)
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 10
  
  \x1b[0;33mchangeset:   9:6dd8ea7dd621\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 9
  
  \x1b[0;33mchangeset:   8:cff05a6312fe\x1b[0m (esc)
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     modify a 8
  
#endif

A complicated pager command gets worse behavior. Bonus points if you can
improve this.
  $ hg log --limit 3 \
  >   --config pager.pager='this-command-better-never-exist --seriously' \
  >  2>/dev/null || true

Pager works with shell aliases.

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > echoa = !echo a
  > EOF

  $ hg echoa
  a
BROKEN: should be paged
  $ hg --config pager.attend-echoa=yes echoa
  a

Pager works with hg aliases including environment variables.

  $ cat >> $HGRCPATH <<'EOF'
  > [alias]
  > printa = log -T "$A\n" -r 0
  > EOF

  $ A=1 hg --config pager.attend-printa=yes printa
  paged! '1\n'
  $ A=2 hg --config pager.attend-printa=yes printa
  paged! '2\n'

Something that's explicitly attended is still not paginated if the
pager is globally set to off using a flag:
  $ A=2 hg --config pager.attend-printa=yes printa --pager=no
  2

Pager should not override the exit code of other commands

  $ cat >> $TESTTMP/fortytwo.py <<'EOF'
  > from mercurial import commands, registrar
  > cmdtable = {}
  > command = registrar.command(cmdtable)
  > @command(b'fortytwo', [], b'fortytwo', norepo=True)
  > def fortytwo(ui, *opts):
  >     ui.write(b'42\n')
  >     return 42
  > EOF

  $ cat >> $HGRCPATH <<'EOF'
  > [extensions]
  > fortytwo = $TESTTMP/fortytwo.py
  > EOF

  $ hg fortytwo --pager=on
  paged! '42\n'
  [42]

A command that asks for paging using ui.pager() directly works:
  $ hg blame a
  paged! ' 0: a\n'
  paged! ' 1: a 1\n'
  paged! ' 2: a 2\n'
  paged! ' 3: a 3\n'
  paged! ' 4: a 4\n'
  paged! ' 5: a 5\n'
  paged! ' 6: a 6\n'
  paged! ' 7: a 7\n'
  paged! ' 8: a 8\n'
  paged! ' 9: a 9\n'
  paged! '10: a 10\n'
but not with HGPLAIN
  $ HGPLAIN=1 hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10
explicit flags work too:
  $ hg blame --pager=no a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

A command with --output option:

  $ hg cat -r0 a
  paged! 'a\n'
  $ hg cat -r0 a --output=-
  paged! 'a\n'
  $ hg cat -r0 a --output=out

  $ hg export -r0
  paged! '# HG changeset patch\n'
  paged! '# User test\n'
  paged! '# Date 0 0\n'
  paged! '#      Thu Jan 01 00:00:00 1970 +0000\n'
  paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
  paged! '# Parent  0000000000000000000000000000000000000000\n'
  paged! 'add a\n'
  paged! '\n'
  paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
  paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
  paged! '\x1b[0;32m+a\x1b[0m\n'
  $ hg export -r0 -o -
  paged! '# HG changeset patch\n'
  paged! '# User test\n'
  paged! '# Date 0 0\n'
  paged! '#      Thu Jan 01 00:00:00 1970 +0000\n'
  paged! '# Node ID 1f0dee641bb7258c56bd60e93edfa2405381c41e\n'
  paged! '# Parent  0000000000000000000000000000000000000000\n'
  paged! 'add a\n'
  paged! '\n'
  paged! '\x1b[0;1mdiff -r 000000000000 -r 1f0dee641bb7 a\x1b[0m\n'
  paged! '\x1b[0;31;1m--- /dev/null\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;32;1m+++ b/a\tThu Jan 01 00:00:00 1970 +0000\x1b[0m\n'
  paged! '\x1b[0;35m@@ -0,0 +1,1 @@\x1b[0m\n'
  paged! '\x1b[0;32m+a\x1b[0m\n'
  $ hg export -r0 -o out

  $ rm out

Put annotate in the ignore list for pager:
  $ cat >> $HGRCPATH <<EOF
  > [pager]
  > ignore = annotate
  > EOF
  $ hg blame a
   0: a
   1: a 1
   2: a 2
   3: a 3
   4: a 4
   5: a 5
   6: a 6
   7: a 7
   8: a 8
   9: a 9
  10: a 10

During pushbuffer, pager should not start:
  $ cat > $TESTTMP/pushbufferpager.py <<EOF
  > def uisetup(ui):
  >     ui.pushbuffer()
  >     ui.pager(b'mycmd')
  >     ui.write(b'content\n')
  >     ui.write(ui.popbuffer())
  > EOF

  $ echo append >> a
  $ hg --config extensions.pushbuffer=$TESTTMP/pushbufferpager.py status --color=off
  content
  paged! 'M a\n'

Environment variables like LESS and LV are set automatically:
  $ cat > $TESTTMP/printlesslv.py <<EOF
  > from __future__ import absolute_import
  > import os
  > import sys
  > sys.stdin.read()
  > for name in ['LESS', 'LV']:
  >     sys.stdout.write(('%s=%s\n') % (name, os.environ.get(name, '-')))
  > sys.stdout.flush()
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [alias]
  > noop = log -r 0 -T ''
  > [ui]
  > formatted=1
  > [pager]
  > pager = "$PYTHON" $TESTTMP/printlesslv.py
  > EOF
  $ unset LESS
  $ unset LV
  $ hg noop --pager=on
  LESS=FRX
  LV=-c
  $ LESS=EFGH hg noop --pager=on
  LESS=EFGH
  LV=-c