view tests/test-rebase-pull.t @ 43198:c16fe77e340a

pathcopies: give up any optimization based on `introrev`

Between 8a0136f69027 and d98fb3f42f33, we sped up the search for the
introduction revision during path copies. However, further checking show that
finding the introduction revision is still expensive and that we are better off
without it. So we simply drop it and only rely on the linkrev optimisation.

I ran `perfpathcopies` on 6989 pair of revision in the pypy
repository (`hg perfhelper-pathcopies`. The result is massively in favor of
dropping this condition. The result of the copy tracing are unchanged.

Attempt to use a smaller changes preserving linkrev usage were unsuccessful, it
can return wrong result. The following changesets broke test-mv-cp-st-diff.t

    -        if not f.isintroducedafter(limit):
    +        if limit >= 0 and f.linkrev() < limit:
                 return None


Here are various numbers (before this changeset/after this changesets)

            source       destination  before      after    saved-time  ratio
worth cases e66f24650daf 695dfb0f493b 1.062843 1.246369 -0.183526 1.172675
            c979853a3b6a 8d60fe293e79 1.036985 1.196414 -0.159429 1.153743
            22349fa2fc33 fbb1c9fd86c0 0.879926 1.038682 -0.158756 1.180420
            682b98f3e672 a4878080a536 0.909952 1.063801 -0.153849 1.169074
            5adabc9b9848 920958a93997 0.993622 1.147452 -0.153830 1.154817
worse  1%   dbfbfcf077e9 aea8f2fd3593 1.016595 1.082999 -0.066404 1.065320
worse  5%   c95f1ced15f2 7d29d5e39734 0.453694 0.471156 -0.017462 1.038488
worse 10%   3e144ed1d5b7 2aef0e942480 0.035140 0.037535 -0.002395 1.068156
worse 25%   321fc60db035 801748ba582a 0.009267 0.009325 -0.000058 1.006259
median      2088ce763fc2 e6991321d78b 0.000665 0.000651 0.000014 0.978947
best 25%    915631a97de6 385b31354be6 0.040743 0.040363 0.000380 0.990673
best 10%    ad495c36a765 19c10384d3e7 0.431658 0.411490 0.020168 0.953278
best  5%    d13ae7d283ae 813c99f810ac 1.141404 1.075346 0.066058 0.942126
best  1%    81593cb4a496 99ae11866969 1.833297 0.063823 1.769474 0.034813
best cases  c3b14617fbd7 743a0fcaa4eb 1101.811740 2.735970 1099.075770 0.002483
            c3b14617fbd7 9ba6ab77fd29 1116.753953 2.800729 1113.953224 0.002508
            058b99d6e81f 57e249b7a3ea 1246.128485 3.042762 1243.085723 0.002442
            9a8c361aab49 0354a250d371 1253.111894 3.085796 1250.026098 0.002463
            442dbbc53c68 3ec1002a818c 1261.786294 3.138607 1258.647687 0.002487


As one can see, the average case is not really impacted. However, the worth case
we get after this changeset are much better than the one we had before it. We
have 30 pairs where improvements are above 10 minutes.

This reflect in the combined time for all pairs
before: 26256s
after:   1300s (-95%)

If we remove these pathological 30 cases, we still see a significant improvements:
before:  1631s
after:   1245s (-24%)

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > rebase=
  > histedit=
  > 
  > [alias]
  > tglog = log -G --template "{rev}: {node|short} '{desc}' {branches}\n"
  > EOF


  $ hg init a
  $ cd a

  $ echo C1 > C1
  $ hg ci -Am C1
  adding C1

  $ echo C2 > C2
  $ hg ci -Am C2
  adding C2

  $ cd ..

  $ hg clone a b
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg clone a c
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd b

  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1


  $ cd ../a

  $ echo R1 > R1
  $ hg ci -Am R1
  adding R1


  $ cd ../b

Now b has one revision to be pulled from a:

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 77ae9631bcca
  rebasing 2:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/b/.hg/strip-backup/ff8d69a621f9-160fa373-rebase.hg

  $ hg tglog
  @  3: d80cc2da061e 'L1'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
Re-run:

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  no changes found

Abort pull early if working dir is not clean:

  $ echo L1-mod > L1
  $ hg pull --rebase
  abort: uncommitted changes
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early if another operation (histedit) is in progress:

  $ hg histedit . -q --commands - << EOF
  > edit d80cc2da061e histedit: generate unfinished state
  > EOF
  Editing (d80cc2da061e), you may commit or record as needed now.
  (hg histedit --continue to resume)
  [1]
  $ hg pull --rebase
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ hg histedit --abort --quiet

Abort pull early with pending uncommitted merge:

  $ cd ..
  $ hg clone --noupdate c d
  $ cd d
  $ hg tglog
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ hg update --quiet 0
  $ echo M1 > M1
  $ hg commit --quiet -Am M1
  $ hg update --quiet 1
  $ hg merge 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg pull --rebase
  abort: outstanding uncommitted merge
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]
  $ hg update --clean --quiet

Abort pull early with unclean subrepo:
  $ echo s = s > .hgsub
  $ hg add .hgsub
  $ hg init s
  $ hg commit -m "generated a subrepo"
  $ echo a > s/a
  $ hg -R s add s/a
  $ hg pull --rebase
  abort: uncommitted changes in subrepository "s"
  (cannot pull with rebase: please commit or shelve your changes first)
  [255]

Invoke pull --rebase and nothing to rebase:

  $ cd ../c

  $ hg book norebase
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 77ae9631bcca
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updating bookmark norebase

  $ hg tglog -l 1
  @  2: 77ae9631bcca 'R1'
  |
  ~

pull --rebase --update should ignore --update:

  $ hg pull --rebase --update
  pulling from $TESTTMP/a
  searching for changes
  no changes found

pull --rebase doesn't update if nothing has been pulled:

  $ hg up -q 1

  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  no changes found

  $ hg tglog -l 1
  o  2: 77ae9631bcca 'R1'
  |
  ~

  $ cd ..

pull --rebase works when a specific revision is pulled (issue3619)

  $ cd a
  $ hg tglog
  @  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ echo R2 > R2
  $ hg ci -Am R2
  adding R2
  $ echo R3 > R3
  $ hg ci -Am R3
  adding R3
  $ cd ../c
  $ hg tglog
  o  2: 77ae9631bcca 'R1'
  |
  @  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ echo L1 > L1
  $ hg ci -Am L1
  adding L1
  created new head
  $ hg pull --rev tip --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  new changesets 31cd3a05214e:770a61882ace
  rebasing 3:ff8d69a621f9 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/ff8d69a621f9-160fa373-rebase.hg
  $ hg tglog
  @  5: 518d153c0ba3 'L1'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
pull --rebase works with bundle2 turned on

  $ cd ../a
  $ echo R4 > R4
  $ hg ci -Am R4
  adding R4
  $ hg tglog
  @  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ cd ../c
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 00e3b7781125
  rebasing 5:518d153c0ba3 "L1"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/518d153c0ba3-73407f14-rebase.hg
  $ hg tglog
  @  6: 0d0727eb7ce0 'L1'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

pull --rebase only update if there is nothing to rebase

  $ cd ../a
  $ echo R5 > R5
  $ hg ci -Am R5
  adding R5
  $ hg tglog
  @  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  
  $ cd ../c
  $ echo L2 > L2
  $ hg ci -Am L2
  adding L2
  $ hg up 'desc(L1)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 88dd24261747
  rebasing 6:0d0727eb7ce0 "L1"
  rebasing 7:c1f58876e3bf "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/0d0727eb7ce0-ef61ccb2-rebase.hg
  $ hg tglog
  o  8: 6dc0ea5dcf55 'L2'
  |
  @  7: 864e0a2d2614 'L1'
  |
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

pull --rebase update (no rebase) use proper update:

- warn about other head.

  $ cd ../a
  $ echo R6 > R6
  $ hg ci -Am R6
  adding R6
  $ cd ../c
  $ hg up 'desc(R5)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 65bc164c1d9b
  nothing to rebase - updating instead
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "65bc164c1d9b: R6"
  1 other heads for branch "default"
  $ hg tglog
  @  9: 65bc164c1d9b 'R6'
  |
  | o  8: 6dc0ea5dcf55 'L2'
  | |
  | o  7: 864e0a2d2614 'L1'
  |/
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'
  

Multiple pre-existing heads on the branch
-----------------------------------------

Pull bring content, but nothing on the current branch, we should not consider
pre-existing heads.

  $ cd ../a
  $ hg branch unrelatedbranch
  marked working directory as branch unrelatedbranch
  (branches are permanent and global, did you want a bookmark?)
  $ echo B1 > B1
  $ hg commit -Am B1
  adding B1
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 39c381359968
  nothing to rebase

There is two local heads and we pull a third one.
The second local head should not confuse the `hg pull rebase`.

  $ hg up 'desc(R6)'
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ echo M1 > M1
  $ hg commit -Am M1
  adding M1
  $ cd ../a
  $ hg up 'desc(R6)'
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo R7 > R7
  $ hg commit -Am R7
  adding R7
  $ cd ../c
  $ hg up 'desc(L2)'
  2 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg pull --rebase
  pulling from $TESTTMP/a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets f7d3e42052f9
  rebasing 7:864e0a2d2614 "L1"
  rebasing 8:6dc0ea5dcf55 "L2"
  saved backup bundle to $TESTTMP/c/.hg/strip-backup/864e0a2d2614-2f72c89c-rebase.hg
  $ hg tglog
  @  12: 3603a865eea0 'L2'
  |
  o  11: bcc8a9cd04bf 'L1'
  |
  o  10: f7d3e42052f9 'R7'
  |
  | o  9: 41fab4eef82f 'M1'
  |/
  | o  8: 39c381359968 'B1' unrelatedbranch
  |/
  o  7: 65bc164c1d9b 'R6'
  |
  o  6: 88dd24261747 'R5'
  |
  o  5: 00e3b7781125 'R4'
  |
  o  4: 770a61882ace 'R3'
  |
  o  3: 31cd3a05214e 'R2'
  |
  o  2: 77ae9631bcca 'R1'
  |
  o  1: 783333faa078 'C2'
  |
  o  0: 05d58a0c15dd 'C1'