view tests/test-conflict.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

  $ hg init
  $ cat << EOF > a
  > Small Mathematical Series.
  > One
  > Two
  > Three
  > Four
  > Five
  > Hop we are done.
  > EOF
  $ hg add a
  $ hg commit -m ancestor
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 4
  > 5
  > Hop we are done.
  > EOF
  $ hg commit -m branch1
  $ hg co 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat << EOF > a
  > Small Mathematical Series.
  > 1
  > 2
  > 3
  > 6
  > 8
  > Hop we are done.
  > EOF
  $ hg commit -m branch2
  created new head

  $ hg merge 1
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ hg id
  618808747361+c0c68e4fe667+ tip

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: 618808747361 - test: branch2
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: c0c68e4fe667  - test: branch1
  Hop we are done.

  $ hg status
  M a
  ? a.orig

Verify custom conflict markers

  $ hg up -q --clean .
  $ printf "\n[ui]\nmergemarkertemplate={author} {rev}\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: test 2
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: test 1
  Hop we are done.

Verify line splitting of custom conflict marker which causes multiple lines

  $ hg up -q --clean .
  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={author} {rev}\nfoo\nbar\nbaz
  > EOF

  $ hg -q merge 1
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: test 2
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: test 1
  Hop we are done.

Verify line trimming of custom conflict marker using multi-byte characters

  $ hg up -q --clean .
  $ python <<EOF
  > fp = open('logfile', 'w')
  > fp.write('12345678901234567890123456789012345678901234567890' +
  >          '1234567890') # there are 5 more columns for 80 columns
  > 
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > fp.write(u'\u3042\u3044\u3046\u3048'.encode('utf-8'))
  > 
  > fp.close()
  > EOF
  $ hg add logfile
  $ hg --encoding utf-8 commit --logfile logfile

  $ cat >> .hg/hgrc <<EOF
  > [ui]
  > mergemarkertemplate={desc|firstline}
  > EOF

  $ hg -q --encoding utf-8 merge 1
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local: 123456789012345678901234567890123456789012345678901234567890\xe3\x81\x82... (esc)
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other: branch1
  Hop we are done.

Verify basic conflict markers

  $ hg up -q --clean 2
  $ printf "\n[ui]\nmergemarkers=basic\n" >> .hg/hgrc

  $ hg merge 1
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]

  $ cat a
  Small Mathematical Series.
  <<<<<<< local
  1
  2
  3
  6
  8
  =======
  1
  2
  3
  4
  5
  >>>>>>> other
  Hop we are done.

internal:merge3

  $ hg up -q --clean .

  $ hg merge 1 --tool internal:merge3
  merging a
  warning: conflicts during merge.
  merging a incomplete! (edit conflicts, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ cat a
  Small Mathematical Series.
  <<<<<<< local
  1
  2
  3
  6
  8
  ||||||| base
  One
  Two
  Three
  Four
  Five
  =======
  1
  2
  3
  4
  5
  >>>>>>> other
  Hop we are done.