view tests/test-hardlinks.t @ 23702:c48924787eaa

filectx.parents: enforce changeid of parent to be in own changectx ancestors

Because of the way filenodes are computed, you can have multiple changesets
"introducing" the same file revision. For example, in the changeset graph
below, changeset 2 and 3 both change a file -to- and -from- the same content.

  o 3: content = new
  |
  | o 2: content = new
  |/
  o 1: content = old

In such cases, the file revision is create once, when 2 is added, and just reused
for 3. So the file change in '3' (from "old" to "new)" has no linkrev pointing
to it).  We'll call this situation "linkrev-shadowing". As the linkrev is used for
optimization purposes when walking a file history, the linkrev-shadowing
results in an unexpected jump to another branch during such a walk.. This leads to
multiple bugs with log, annotate and rename detection.

One element to fix such bugs is to ensure that walking the file history sticks on
the same topology as the changeset's history. For this purpose, we extend the
logic in 'basefilectx.parents' so that it always defines the proper changeset
to associate the parent file revision with. This "proper" changeset has to be an
ancestor of the changeset associated with the child file revision.

This logic is performed in the '_adjustlinkrev' function. This function is
given the starting changeset and all the information regarding the parent file
revision. If the linkrev for the file revision is an ancestor of the starting
changeset, the linkrev is valid and will be used. If it is not, we detected a
topological jump caused by linkrev shadowing, we are going to walk the
ancestors of the starting changeset until we find one setting the file to the
revision we are trying to create.

The performance impact appears acceptable:

- We are walking the changelog once for each filelog traversal (as there should
  be no overlap between searches),

- changelog traversal itself is fairly cheap, compared to what is likely going
  to be perform on the result on the filelog traversal,

- We only touch the manifest for ancestors touching the file, And such
  changesets are likely to be the one introducing the file. (except in
  pathological cases involving merge),

- We use manifest diff instead of full manifest unpacking to check manifest
  content, so it does not involve applying multiple diffs in most case.

- linkrev shadowing is not the common case.

Tests for fixed issues in log, annotate and rename detection have been
added.

But this changeset does not solve all problems. It fixes -ancestry-
computation, but if the linkrev-shadowed changesets is the starting one, we'll
still get things wrong. We'll have to fix the bootstrapping of such operations
in a later changeset. Also, the usage of `hg log FILE`  without --follow still
has issues with linkrev pointing to hidden changesets, because it relies on the
`filelog` revset which implement its own traversal logic that is still to be
fixed.

Thanks goes to:
- Matt Mackall: for nudging me in the right direction
- Julien Cristau and Rémi Cardona: for keep telling me linkrev bug were an
  evolution show stopper for 3 years.
- Durham Goode: for finding a new linkrev issue every few weeks
- Mads Kiilerich: for that last rename bug who raise this topic over my
  anoyance limit.

#require hardlink

  $ cat > nlinks.py <<EOF
  > import sys
  > from mercurial import util
  > for f in sorted(sys.stdin.readlines()):
  >     f = f[:-1]
  >     print util.nlinks(f), f
  > EOF

  $ nlinksdir()
  > {
  >     find $1 -type f | python $TESTTMP/nlinks.py
  > }

Some implementations of cp can't create hardlinks (replaces 'cp -al' on Linux):

  $ cat > linkcp.py <<EOF
  > from mercurial import util
  > import sys
  > util.copyfiles(sys.argv[1], sys.argv[2], hardlink=True)
  > EOF

  $ linkcp()
  > {
  >     python $TESTTMP/linkcp.py $1 $2
  > }

Prepare repo r1:

  $ hg init r1
  $ cd r1

  $ echo c1 > f1
  $ hg add f1
  $ hg ci -m0

  $ mkdir d1
  $ cd d1
  $ echo c2 > f2
  $ hg add f2
  $ hg ci -m1
  $ cd ../..

  $ nlinksdir r1/.hg/store
  1 r1/.hg/store/00changelog.i
  1 r1/.hg/store/00manifest.i
  1 r1/.hg/store/data/d1/f2.i
  1 r1/.hg/store/data/f1.i
  1 r1/.hg/store/fncache
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.phaseroots


Create hardlinked clone r2:

  $ hg clone -U --debug r1 r2
  linked 7 files

Create non-hardlinked clone r3:

  $ hg clone --pull r1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved


Repos r1 and r2 should now contain hardlinked files:

  $ nlinksdir r1/.hg/store
  2 r1/.hg/store/00changelog.i
  2 r1/.hg/store/00manifest.i
  2 r1/.hg/store/data/d1/f2.i
  2 r1/.hg/store/data/f1.i
  2 r1/.hg/store/fncache
  1 r1/.hg/store/phaseroots
  1 r1/.hg/store/undo
  1 r1/.hg/store/undo.phaseroots

  $ nlinksdir r2/.hg/store
  2 r2/.hg/store/00changelog.i
  2 r2/.hg/store/00manifest.i
  2 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  2 r2/.hg/store/fncache

Repo r3 should not be hardlinked:

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.phaseroots


Create a non-inlined filelog in r3:

  $ cd r3/d1
  >>> f = open('data1', 'wb')
  >>> for x in range(10000):
  ...     f.write("%s\n" % str(x))
  >>> f.close()
  $ for j in 0 1 2 3 4 5 6 7 8 9; do
  >   cat data1 >> f2
  >   hg commit -m$j
  > done
  $ cd ../..

  $ nlinksdir r3/.hg/store
  1 r3/.hg/store/00changelog.i
  1 r3/.hg/store/00manifest.i
  1 r3/.hg/store/data/d1/f2.d
  1 r3/.hg/store/data/d1/f2.i
  1 r3/.hg/store/data/f1.i
  1 r3/.hg/store/fncache
  1 r3/.hg/store/phaseroots
  1 r3/.hg/store/undo
  1 r3/.hg/store/undo.phaseroots

Push to repo r1 should break up most hardlinks in r2:

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd r3
  $ hg push
  pushing to $TESTTMP/r1 (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 10 changesets with 10 changes to 1 files

  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  2 r2/.hg/store/data/f1.i
  1 r2/.hg/store/fncache

  $ hg -R r2 verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions


  $ cd r1
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Committing a change to f1 in r1 must break up hardlink f1.i in r2:

  $ echo c1c1 >> f1
  $ hg ci -m00
  $ cd ..

  $ nlinksdir r2/.hg/store
  1 r2/.hg/store/00changelog.i
  1 r2/.hg/store/00manifest.i
  1 r2/.hg/store/data/d1/f2.i
  1 r2/.hg/store/data/f1.i
  1 r2/.hg/store/fncache


  $ cd r3
  $ hg tip --template '{rev}:{node|short}\n'
  11:a6451b6bc41f
  $ echo bla > f1
  $ hg ci -m1
  $ cd ..

Create hardlinked copy r4 of r3 (on Linux, we would call 'cp -al'):

  $ linkcp r3 r4

r4 has hardlinks in the working dir (not just inside .hg):

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  2 r4/.hg/branch
  2 r4/.hg/cache/branch2-served
  2 r4/.hg/dirstate
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.phaseroots
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  2 r4/.hg/undo.dirstate
  2 r4/d1/data1
  2 r4/d1/f2
  2 r4/f1

Update back to revision 11 in r4 should break hardlink of file f1:

  $ hg -R r4 up 11
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ nlinksdir r4
  2 r4/.hg/00changelog.i
  1 r4/.hg/branch
  2 r4/.hg/cache/branch2-served
  1 r4/.hg/dirstate
  2 r4/.hg/hgrc
  2 r4/.hg/last-message.txt
  2 r4/.hg/requires
  2 r4/.hg/store/00changelog.i
  2 r4/.hg/store/00manifest.i
  2 r4/.hg/store/data/d1/f2.d
  2 r4/.hg/store/data/d1/f2.i
  2 r4/.hg/store/data/f1.i
  2 r4/.hg/store/fncache
  2 r4/.hg/store/phaseroots
  2 r4/.hg/store/undo
  2 r4/.hg/store/undo.phaseroots
  2 r4/.hg/undo.bookmarks
  2 r4/.hg/undo.branch
  2 r4/.hg/undo.desc
  2 r4/.hg/undo.dirstate
  2 r4/d1/data1
  2 r4/d1/f2
  1 r4/f1


Test hardlinking outside hg:

  $ mkdir x
  $ echo foo > x/a

  $ linkcp x y
  $ echo bar >> y/a

No diff if hardlink:

  $ diff x/a y/a

Test mq hardlinking:

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init a
  $ cd a

  $ hg qimport -n foo - << EOF
  > # HG changeset patch
  > # Date 1 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/a	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +a
  > EOF
  adding foo to series file

  $ hg qpush
  applying foo
  now at: foo

  $ cd ..
  $ linkcp a b
  $ cd b

  $ hg qimport -n bar - << EOF
  > # HG changeset patch
  > # Date 2 0
  > diff -r 2588a8b53d66 a
  > --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
  > +++ b/b	Wed Jul 23 15:54:29 2008 +0200
  > @@ -0,0 +1,1 @@
  > +b
  > EOF
  adding bar to series file

  $ hg qpush
  applying bar
  now at: bar

  $ cat .hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c:bar

  $ cat .hg/patches/series
  foo
  bar

  $ cat ../a/.hg/patches/status
  430ed4828a74fa4047bc816a25500f7472ab4bfe:foo

  $ cat ../a/.hg/patches/series
  foo

Test tags hardlinking:

  $ hg qdel -r qbase:qtip
  patch foo finalized without changeset message
  patch bar finalized without changeset message

  $ hg tag -l lfoo
  $ hg tag foo

  $ cd ..
  $ linkcp b c
  $ cd c

  $ hg tag -l -r 0 lbar
  $ hg tag -r 0 bar

  $ cat .hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo
  430ed4828a74fa4047bc816a25500f7472ab4bfe bar

  $ cat .hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo
  430ed4828a74fa4047bc816a25500f7472ab4bfe lbar

  $ cat ../b/.hgtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c foo

  $ cat ../b/.hg/localtags
  4e7abb4840c46a910f6d7b4d3c3fc7e5209e684c lfoo

  $ cd ..